Topic: ckpool.org CLOSED - page 49. (Read 162838 times)
Oh, btw. -ckpool is my personal choice of pool. Has nothing to do with mfb as we do not farm/mine as a company. Just to clear up anything for everyone.
-ck, what would be the best way to change payment address? Just flat out? ramp up small hash then swap everything? Or does it not matter with your pool design?
I've been thinking about this as well. My plan is to run up the my current address until it's in the payout list, then switch my miners to the new address.
That shouldn't leave anything on the old address when the next block hits.
-ck, what would be the best way to change payment address? Just flat out? ramp up small hash then swap everything? Or does it not matter with your pool design?
dropped to:
Estimated Next Difficulty: 6,172,153,510,638 (+3.74%)
Estimated Next Difficulty: 6,172,153,510,638 (+3.74%)
Next Difficulty Estimated
(+7.67%) 6.41 T
Date to Next Difficulty
3 Days 22 Hours
(+7.67%) 6.41 T
Date to Next Difficulty
3 Days 22 Hours
Hey Rifle, thanks. Must have been old news then?
it's come down quite a bit though in the past few days, was 15%+ earlier....
Next Difficulty Estimated
(+7.67%) 6.41 T
Date to Next Difficulty
3 Days 22 Hours
(+7.67%) 6.41 T
Date to Next Difficulty
3 Days 22 Hours
Hey Rifle, thanks. Must have been old news then?
Next Difficulty Estimated
(+7.67%) 6.41 T
Date to Next Difficulty
3 Days 22 Hours
(+7.67%) 6.41 T
Date to Next Difficulty
3 Days 22 Hours
It's going to be hot here today and tomorrow close to 100F. No exhaust upgrade yet. .... Hoping to have two of four hashing through it. I heard/read somewhere about a 12% drop in diff? or was I mistaken?
User error if you can imagine that. Missed that one at 1:00 am this morning. My apologies. Newbie error.
Why you gotta get my hopes up like that? The cruelty.
) User error if you can imagine that. Missed that one at 1:00 am this morning. My apologies. Newbie error.
Why you gotta get my hopes up like that? The cruelty.
User error if you can imagine that. Missed that one at 1:00 am this morning. My apologies. Newbie error.
Well back to blocks and beer. ? %
# off... # on... Mr. Nyagi
Block!
Well back to blocks and beer. ? %
# off... # on... Mr. Nyagi
Block!
Well back to blocks and beer. ? %
# off... # on... Mr. Nyagi
Block!
Well back to blocks and beer. ? %
# off... # on... Mr. Nyagi
Well back to blocks and beer. ? %
The answers you are looking for are likely in the first pages of:
https://bitcointalksearch.org/topic/gekkoscience-2paccompac-bm1384-stickminer-official-support-thread-1764803
or
On the cgminer setup pages and readme files.
Quote
Now we're really off topic and you have some reading and testing to do... it's gonna take some of YOUR time...
For my defense, I did spend quite a bit of time on this (including going through the readme file and 2PAC thread) without succeeding.I managed to have it work nicely on a batch file or command line, but not in a config file.
I want to go the config file way, mainly because I can't figure out how to set up multiple pool in a command line, which you can do in a config file.
My mistake actually was that I tried "suggest-diff" : 128 in the config file without the "" around "128" and cgminer does not like it...
Thanks for your help, and the explanation on the diff with the pool :-)
I am mining here, plus -CK's solo pool, plus a multi-pool alt coin concurrently. All miners are in one good quality hub and started by three different .bat files - all running thru an older Windoze 10 computer... so what you seek is certainly possible using my method... it's not the only path perhaps but it's easy enough for me... good luck and good mining...
G
The answers you are looking for are likely in the first pages of:
https://bitcointalksearch.org/topic/gekkoscience-2paccompac-bm1384-stickminer-official-support-thread-1764803
or
On the cgminer setup pages and readme files.
Quote
Now we're really off topic and you have some reading and testing to do... it's gonna take some of YOUR time...
For my defense, I did spend quite a bit of time on this (including going through the readme file and 2PAC thread) without succeeding.I managed to have it work nicely on a batch file or command line, but not in a config file.
I want to go the config file way, mainly because I can't figure out how to set up multiple pool in a command line, which you can do in a config file.
My mistake actually was that I tried "suggest-diff" : 128 in the config file without the "" around "128" and cgminer does not like it...
Thanks for your help, and the explanation on the diff with the pool :-)
The answers you are looking for are likely in the first pages of:
https://bitcointalksearch.org/topic/gekkoscience-2paccompac-bm1384-stickminer-official-support-thread-1764803
or
On the cgminer setup pages and readme files.
Quote
Now we're really off topic and you have some reading and testing to do... it's gonna take some of YOUR time...
For my defense, I did spend quite a bit of time on this (including going through the readme file and 2PAC thread) without succeeding.I managed to have it work nicely on a batch file or command line, but not in a config file.
I want to go the config file way, mainly because I can't figure out how to set up multiple pool in a command line, which you can do in a config file.
My mistake actually was that I tried "suggest-diff" : 128 in the config file without the "" around "128" and cgminer does not like it...
Thanks for your help, and the explanation on the diff with the pool :-)
Doesn't the poll [pool?] set diff for us?
It does if you don't use --suggest-diff `__' - but its default is set around 10,000 now so when you start a new stick miner up it can take a l-o-n-g time for you to get an Accepted share... that's what the pool needs to set a difficulty for you, so it speeds up the process and/or gives you some control. Previously Genie has offered up the math to prove there's no real difference in the difficulty you choose... but sometimes it's nice to see the little miners at work...Jump to: