Topic: Claymore XPM GPU Miner discussion - page 29. (Read 142114 times)
is it true that the v4.0 consume similar power as scrypt mining?
Morning Claymore, morning guys.
Question: what is the difference between these 2 commands?
setx GPU_MAX_ALLOC_PERCENT 100
and
set GPU_MAX_ALLOC_PERCENT 100 (set without x after)
plus, which command of these 2 shall I use with claymore's XPM miner?
Thank you in advance.
setx makes it permanent in your registry and set only is local and one time event.Question: what is the difference between these 2 commands?
setx GPU_MAX_ALLOC_PERCENT 100
and
set GPU_MAX_ALLOC_PERCENT 100 (set without x after)
plus, which command of these 2 shall I use with claymore's XPM miner?
Thank you in advance.
If you are sure about your settings and dont need to configure, use setx if not use set in batfile.
that explains everything, thanks a lot for the help..
Morning Claymore, morning guys.
Question: what is the difference between these 2 commands?
setx GPU_MAX_ALLOC_PERCENT 100
and
set GPU_MAX_ALLOC_PERCENT 100 (set without x after)
plus, which command of these 2 shall I use with claymore's XPM miner?
Thank you in advance.
setx makes it permanent in your registry and set only is local and one time event.Question: what is the difference between these 2 commands?
setx GPU_MAX_ALLOC_PERCENT 100
and
set GPU_MAX_ALLOC_PERCENT 100 (set without x after)
plus, which command of these 2 shall I use with claymore's XPM miner?
Thank you in advance.
If you are sure about your settings and dont need to configure, use setx if not use set in batfile.
Morning Claymore, morning guys.
Question: what is the difference between these 2 commands?
setx GPU_MAX_ALLOC_PERCENT 100
and
set GPU_MAX_ALLOC_PERCENT 100 (set without x after)
plus, which command of these 2 shall I use with claymore's XPM miner?
Thank you in advance.
Question: what is the difference between these 2 commands?
setx GPU_MAX_ALLOC_PERCENT 100
and
set GPU_MAX_ALLOC_PERCENT 100 (set without x after)
plus, which command of these 2 shall I use with claymore's XPM miner?
Thank you in advance.
fee is good double win, can you cut off some- -
Claymore really good job. I didn't have time to follow this miner for a week, but I see you were able to disable mining of other coins using primecoin algo.
with versions 3 and above, pool and solo. Are you happy with time spent for that, so people can't mine what they prefer? LOL.
Well, last i checked i was still able to choose what i wanted to mine...with versions 3 and above, pool and solo. Are you happy with time spent for that, so people can't mine what they prefer? LOL.
Ofc a developer of software will always try to make it "protected" for his interest, but again, you are free to choose whatever miner you want!
Or you can make one yourself?
Credits to claymore for making a software that represents more than 60% of current network!
If you find that a problem, make your own
Fee or no fee, its a very good piece of work.
happy mining
Claymore really good job. I didn't have time to follow this miner for a week, but I see you were able to disable mining of other coins using primecoin algo.
with versions 3 and above, pool and solo. Are you happy with time spent for that, so people can't mine what they prefer? LOL.
with versions 3 and above, pool and solo. Are you happy with time spent for that, so people can't mine what they prefer? LOL.
Только ддос может помочь 
Only ddos can help
И это я тоже проверил, у них хорошая защита http://www.link11.de/ddos-schutz.html =(Only ddos can help
And I also checked, they have a good defense http://www.link11.de/ddos-schutz.html = (
Я проверил блоки с 510824-25.04.2014 21:10 до 511824-26.04.2014 11:58. 1000 блоков.
73,8% (738 блока) всех блоков достались Ypool, 26,2% (262 блока) достались всем остальным. (+/- 1,5% Orphaned)
Я думаю в соло уже нет смысла пытаться.
I checked blocks 510824-25.04.2014 21:10 to 511824-26.04.2014.11:58. 1000 blocks.
73.8% (738 blocks) of all blocks got Ypool, 26,2% (262 blocks) got everything else. (+/- 1,5% Orphaned)
I think the solo is no point in trying.
Только ддос может помочь 73,8% (738 блока) всех блоков достались Ypool, 26,2% (262 блока) достались всем остальным. (+/- 1,5% Orphaned)
Я думаю в соло уже нет смысла пытаться.
I checked blocks 510824-25.04.2014 21:10 to 511824-26.04.2014.11:58. 1000 blocks.
73.8% (738 blocks) of all blocks got Ypool, 26,2% (262 blocks) got everything else. (+/- 1,5% Orphaned)
I think the solo is no point in trying.
Only ddos can help
Я проверил блоки с 510824-25.04.2014 21:10 до 511824-26.04.2014 11:58. 1000 блоков.
73,8% (738 блока) всех блоков достались Ypool, 26,2% (262 блока) достались всем остальным. (+/- 1,5% Orphaned)
Я думаю в соло уже нет смысла пытаться.
I checked blocks 510824-25.04.2014 21:10 to 511824-26.04.2014.11:58. 1000 blocks.
73.8% (738 blocks) of all blocks got Ypool, 26,2% (262 blocks) got everything else. (+/- 1,5% Orphaned)
I think the solo is no point in trying.
73,8% (738 блока) всех блоков достались Ypool, 26,2% (262 блока) достались всем остальным. (+/- 1,5% Orphaned)
Я думаю в соло уже нет смысла пытаться.
I checked blocks 510824-25.04.2014 21:10 to 511824-26.04.2014.11:58. 1000 blocks.
73.8% (738 blocks) of all blocks got Ypool, 26,2% (262 blocks) got everything else. (+/- 1,5% Orphaned)
I think the solo is no point in trying.
So solo mining requires a lot of wallet connections. Can we do something about it?
What about "addnode"? Can we add one another? I for one have a static IP, have a linux server 24x7 and can run a primecoind on it. We have to compete with ypool on propagating solved blocks. If they have even 1 second gain as opposed to solo miners like us that translates to about 1.5% more blocks awarded to them. Right?
What about "addnode"? Can we add one another? I for one have a static IP, have a linux server 24x7 and can run a primecoind on it. We have to compete with ypool on propagating solved blocks. If they have even 1 second gain as opposed to solo miners like us that translates to about 1.5% more blocks awarded to them. Right?
During the last 15 minutes in the wallet was gone and there was 2 blocks, what happens?
Any plan to add -nofee option(but low power) in SOLO version?Weather's getting hot 
v4.0 is available:
- Improved speed by about 15-25% (depends on card) on 7xxx, 270(x), 280X cards.
- Improved speed by about 10% on 290(X) cards. For 290X CPD is about 2.6-2.7 now.
- Improved speed by about 15-25% (depends on card) on 7xxx, 270(x), 280X cards.
- Improved speed by about 10% on 290(X) cards. For 290X CPD is about 2.6-2.7 now.
Decreasing GPU clocks and/or undervolting is more efficient, but yes, I will add this option in next version.
3. There are not modified drivers that support 6 cards or more at this moment.
I check all new versions, as soon as AMD releases good version or I find any real improvement in some existing version I will migrate to it.
Could you direct me how to install 6 vga?I check all new versions, as soon as AMD releases good version or I find any real improvement in some existing version I will migrate to it.
I did it for 2 rig. I use win8.1 and cat13.12. Third rig I can't make it work with 6 vga.
Check this:
https://litecointalk.org/index.php?topic=11761.0
Any plan to add -nofee option(but low power) in SOLO version?Weather's getting hot
v4.0 is available:
- Improved speed by about 15-25% (depends on card) on 7xxx, 270(x), 280X cards.
- Improved speed by about 10% on 290(X) cards. For 290X CPD is about 2.6-2.7 now.
- Improved speed by about 15-25% (depends on card) on 7xxx, 270(x), 280X cards.
- Improved speed by about 10% on 290(X) cards. For 290X CPD is about 2.6-2.7 now.
I have 32 connections and recently, I found 3 blocks that were orphaned due to ypool.. I am going to give up solo mining soon ... damn demoralizing.
I use pool, stable income) 3. There are not modified drivers that support 6 cards or more at this moment.
I check all new versions, as soon as AMD releases good version or I find any real improvement in some existing version I will migrate to it.
Could you direct me how to install 6 vga?I check all new versions, as soon as AMD releases good version or I find any real improvement in some existing version I will migrate to it.
I did it for 2 rig. I use win8.1 and cat13.12. Third rig I can't make it work with 6 vga.
Mined about 21 hours on ypool with v4.0 on my Gigabyte OC R9 280X and Sapphire HD7950. Even though I found no blocks, quite happy with the results here. Thanks again, Claymore!
R9 280X: 990/1375 @ 1.094V
════════════════════════════════════════════════
Sat Apr 26 02:51:30 2014
New Block: 511487 - Current Diff: 10.830130
Total/Valid shares: [ 2055 / 1970 ] - Max diff: 10.801474
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 2802K] [ 1867] [ 163] [ 22] [ 4] [ 0] [ 0]
ch/h: [ 133325] [ 88.815] [ 7.754] [ 1.047] [ 0.190] [ 0.000] [ 0.000]
Estimated CPD: 1.5313, Average CPD: 4.5668, Mining time: 21:01
════════════════════════════════════════════════
7950: 990/1375 @ 0.988V
════════════════════════════════════════════════
Sat Apr 26 02:51:29 2014
New Block: 511487 - Current Diff: 10.830130
Total/Valid shares: [ 1866 / 1804 ] - Max diff: 10.801638
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 2481K] [ 1705] [ 145] [ 13] [ 3] [ 0] [ 0]
ch/h: [ 118084] [ 81.142] [ 6.901] [ 0.619] [ 0.143] [ 0.000] [ 0.000]
Estimated CPD: 1.3990, Average CPD: 3.4265, Mining time: 21:00
════════════════════════════════════════════════
R9 280X: 990/1375 @ 1.094V
════════════════════════════════════════════════
Sat Apr 26 02:51:30 2014
New Block: 511487 - Current Diff: 10.830130
Total/Valid shares: [ 2055 / 1970 ] - Max diff: 10.801474
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 2802K] [ 1867] [ 163] [ 22] [ 4] [ 0] [ 0]
ch/h: [ 133325] [ 88.815] [ 7.754] [ 1.047] [ 0.190] [ 0.000] [ 0.000]
Estimated CPD: 1.5313, Average CPD: 4.5668, Mining time: 21:01
════════════════════════════════════════════════
7950: 990/1375 @ 0.988V
════════════════════════════════════════════════
Sat Apr 26 02:51:29 2014
New Block: 511487 - Current Diff: 10.830130
Total/Valid shares: [ 1866 / 1804 ] - Max diff: 10.801638
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 2481K] [ 1705] [ 145] [ 13] [ 3] [ 0] [ 0]
ch/h: [ 118084] [ 81.142] [ 6.901] [ 0.619] [ 0.143] [ 0.000] [ 0.000]
Estimated CPD: 1.3990, Average CPD: 3.4265, Mining time: 21:00
════════════════════════════════════════════════
I have 2 seperate machines solo mining for the heck of it. Both on 4.0v with standard wallet.
Machine 1: 1 R9280x and 1 R9 270 wallet has 8 connections
Machine 2: 2 7850's wallet has 31 connections
Of course with my luck machine 1 can't have the better connection. I copied and pasted the config file from machine 1 to machine 2.
Machine 1: 1 R9280x and 1 R9 270 wallet has 8 connections
Machine 2: 2 7850's wallet has 31 connections
Of course with my luck machine 1 can't have the better connection. I copied and pasted the config file from machine 1 to machine 2.
I have 32 connections and recently, I found 3 blocks that were orphaned due to ypool.. I am going to give up solo mining soon ... damn demoralizing.
I have 2 seperate machines solo mining for the heck of it. Both on 4.0v with standard wallet.
Machine 1: 1 R9280x and 1 R9 270 wallet has 8 connections
Machine 2: 2 7850's wallet has 31 connections
Of course with my luck machine 1 can't have the better connection. I copied and pasted the config file from machine 1 to machine 2.
Machine 1: 1 R9280x and 1 R9 270 wallet has 8 connections
Machine 2: 2 7850's wallet has 31 connections
Of course with my luck machine 1 can't have the better connection. I copied and pasted the config file from machine 1 to machine 2.
Jump to: