Claymore XPM GPU Miner discussion - page 25.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: z0rr0 on May 03, 2014, 09:11:15 AM

Quote from: Claymore on May 03, 2014, 03:29:23 AM

Which settings one should adjust to decrease effectiveness of mining but to be able to comfortable desctop work at the GPU connected to monitor while mining?
I mean - sacrifice a bit mining and decrease lags while working at the PC (similar to intensity in cgminer)

Try "-hc 256" and/or "-t 2".

z0rr0

sr. member

Activity: 303

Merit: 250

Quote from: Claymore on May 03, 2014, 03:29:23 AM

Which settings one should adjust to decrease effectiveness of mining but to be able to comfortable desctop work at the GPU connected to monitor while mining?
I mean - sacrifice a bit mining and decrease lags while working at the PC (similar to intensity in cgminer)

gilad215

full member

Activity: 430

Merit: 100

is there a chance that an instance with -ss 2 will submit more shares on a low-cpu machine? even though the TRT is slower by a few digits?

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: yogibaer on May 03, 2014, 07:53:58 AM

any modifications to your 280x? I used standard settings.

NsXpmMiner.exe -o ypool.net -u 11 -p 22 -di 0 -ss 2 -t 8 -sd 1

yogibaer

legendary

Activity: 1131

Merit: 1001

Quote from: Strannik-74 on May 03, 2014, 07:43:12 AM

Quote from: yogibaer on May 03, 2014, 05:52:23 AM

Running V6.0 for 24h on a 280x (1.85 CPM) and a 270x (1.3 CPD)

https://www.dropbox.com/s/qifh5ya9pwighk5/xpm-gpu-claymore60-24h.jpg

280Х 1175/750
══════════════════════════════════════════════════════════════════════════════
Sat May 03 18:41:38 2014
New Block: 523294 - Current Diff: 10.871311
Total/Valid shares: [ 895 / 836 ] - Max diff: 10.473939
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 1181K] [ 817] [ 72] [ 5] [ 1] [ 0] [ 0]
ch/h: [ 190061] [131.432] [ 11.583] [ 0.804] [ 0.161] [ 0.000] [ 0.000]
Estimated CPD: 2.2661, Average CPD: 3.8609, Mining time: 06:12
══════════════════════════════════════════════════════════════════════════════

any modifications to your 280x? I used standard settings.

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: yogibaer on May 03, 2014, 05:52:23 AM

Running V6.0 for 24h on a 280x (1.85 CPM) and a 270x (1.3 CPD)

https://www.dropbox.com/s/qifh5ya9pwighk5/xpm-gpu-claymore60-24h.jpg

280Х 1175/750
══════════════════════════════════════════════════════════════════════════════
Sat May 03 18:41:38 2014
New Block: 523294 - Current Diff: 10.871311
Total/Valid shares: [ 895 / 836 ] - Max diff: 10.473939
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 1181K] [ 817] [ 72] [ 5] [ 1] [ 0] [ 0]
ch/h: [ 190061] [131.432] [ 11.583] [ 0.804] [ 0.161] [ 0.000] [ 0.000]
Estimated CPD: 2.2661, Average CPD: 3.8609, Mining time: 06:12
══════════════════════════════════════════════════════════════════════════════

yogibaer

legendary

Activity: 1131

Merit: 1001

Quote from: yogibaer on May 02, 2014, 05:41:16 AM

Quote from: Claymore on May 02, 2014, 05:12:46 AM

Version 6.0 is available. +20% speed for all cards. Up to 3.6 CPD on a single 290X.

Thanks for the update. Started mining with V6.0. I'll send a screen shot after a couple of hours ...

Running V6.0 for 24h on a 280x (1.85 CPM) and a 270x (1.3 CPD)

https://www.dropbox.com/s/qifh5ya9pwighk5/xpm-gpu-claymore60-24h.jpg

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Strannik-74 on May 03, 2014, 02:12:46 AM

v 5.0 v 6.0
280X 156k 4ch & TRT 303 -> 189k 4ch & TRT 250 +21%
7950 122k 4ch & TRT 385 -> 146k 4ch & TRT 323 +19%
270X 97k 4ch & TRT 490 -> 115k 4ch & TRT 420 +18%
7850 74k 4ch & TRT 634 -> 85k 4ch & TRT 544 +15%

Thanks for detailed statistics for every new version

Strannik-74

full member

Activity: 348

Merit: 102

v 5.0 v 6.0
280X 156k 4ch & TRT 303 -> 189k 4ch & TRT 250 +21%
7950 122k 4ch & TRT 385 -> 146k 4ch & TRT 323 +19%
270X 97k 4ch & TRT 490 -> 115k 4ch & TRT 420 +18%
7850 74k 4ch & TRT 634 -> 85k 4ch & TRT 544 +15%

Raxin

newbie

Activity: 5

Merit: 0

Hi, anyone else using an ATI HD 7770? I'm getting about 26800 ch/h with the v6 beta, compared to about 16000 on the v5 beta. For scrypt mining the power used is too high (at the current exchanges rates) to make it profitable. Is it worth mining XPM with this card? I haven't been running it long enough to see what the power bill comes up to.

ozzy1926

sr. member

Activity: 378

Merit: 250

Altough my port 9911 is open and i have 20 active connections ,2 out of 3 blocks were orphaned by ypool how can i protect my solo miner from orphans?

kaleruka

newbie

Activity: 28

Merit: 0

Quote from: Claymore on May 02, 2014, 03:44:09 PM

Quote from: kaleruka on May 02, 2014, 03:06:46 PM

seems it dosent support farming in local network)

Google is useful sometimes: https://en.bitcoin.it/wiki/Running_Bitcoin

...
# By default, only RPC connections from localhost are allowed. Specify
# as many rpcallowip= settings as you like to allow connections from
# other hosts (and you may use * as a wildcard character).
# NOTE: opening up the RPC port to hosts outside your local
# trusted network is NOT RECOMMENDED, because the rpcpassword
# is transmitted over the network unencrypted.
#rpcallowip=10.1.1.34
#rpcallowip=192.168.1.*
...

Probably rpcallowip=* will work for you.

ty for help - all working now

kaleruka

newbie

Activity: 28

Merit: 0

NsXpmMiner.exe -o IP here -u user -p 1 -xpm AMSoeimVn5Jc6TvR9uYXTSaGbQedAzGZ4n -di 0 - so its right for solo farming - i will review my xpm to AMSoeimVn5Jc6TvR9uYXTSaGbQedAzGZ4n adress?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: kaleruka on May 02, 2014, 03:06:46 PM

seems it dosent support farming in local network)

Google is useful sometimes: https://en.bitcoin.it/wiki/Running_Bitcoin

...
# By default, only RPC connections from localhost are allowed. Specify
# as many rpcallowip= settings as you like to allow connections from
# other hosts (and you may use * as a wildcard character).
# NOTE: opening up the RPC port to hosts outside your local
# trusted network is NOT RECOMMENDED, because the rpcpassword
# is transmitted over the network unencrypted.
#rpcallowip=10.1.1.34
#rpcallowip=192.168.1.*
...

Probably rpcallowip=* will work for you.

kaleruka

newbie

Activity: 28

Merit: 0

seems it dosent support farming in local network)

kaleruka

newbie

Activity: 28

Merit: 0

if running local wallet - all ok

kaleruka

newbie

Activity: 28

Merit: 0

why i can mine solo here ss
http://imgur.com/cXdDYcG
rpcuser=user
rpcpassword=1
rpcallowip=10.10.10.2
rpcport=7332
server=1

congig server file

NsXpmMiner.exe -o 10.10.10.2:7332 -u user -p 1 -xpm xxxxx-di 0 -hc 256 for miner

cant start please help ,me

seljak

member

Activity: 101

Merit: 10

Quote from: Claymore on May 02, 2014, 05:12:46 AM

Version 6.0 is available. +20% speed for all cards. Up to 3.6 CPD on a single 290X.

Getting more invalid shares with v6.0...over 5%.

z0rr0

sr. member

Activity: 303

Merit: 250

Well, there is definitely effectiveness improve with v6.0 compared to v5.0 (~18% less TRT values and ~20% more ch/h values for 7950).

The only thing is that my win7x64 became a bit laggy, even if active GPU (connected to monitor) is off, 4core cpu is only at about 10% of usage.

yogibaer

legendary

Activity: 1131

Merit: 1001

Quote from: Claymore on May 02, 2014, 05:12:46 AM

Version 6.0 is available. +20% speed for all cards. Up to 3.6 CPD on a single 290X.

Thanks for the update. Started mining with V6.0. I'll send a screen shot after a couple of hours ... Thanks Claymore Grin

Topic: Claymore XPM GPU Miner discussion - page 25. (Read 142114 times)