Claymore XPM GPU Miner discussion - page 24.

liifer

newbie

Activity: 34

Merit: 0

Quote from: z0rr0 on May 06, 2014, 07:31:59 AM

Quote from: aistto on May 06, 2014, 04:04:12 AM

Power consumption from wall.

I measured it on one of my rig, not new (old):
- CPU: core2duo
- Mem: DDR2 2Gb
- PSU: Enermax 550W (old, even not bronze)
- VGA: 2*XFX280X GPU/MEM:1030/1500 VCDD:1v

miner setting GPU 0/1: -ss 1/2 -t default/8

Miner v2.0 375w
Miner v2.1 380w
Miner v3.0 405w
Miner v3.1b 410w
Miner v4.0 405w
Miner v5.0 400w
Miner v6.0 395w

Very ineresting, aistto.
Could you also measure some statistics for scrypt, scrypt-N, X11 and keccak.
If you can, of course.

I guess power consumption begins being very important for many miners...

You can tell by ypool past 48 hours connected workers graph that some people switch rigs of during day around US timezones. I guess people in GER, NED and such don't mine anymore because it can't be profitable unless you steal electricity.

It is already pointless to mine scrypt with GPU and lot of them switch to alternatives.

z0rr0

sr. member

Activity: 303

Merit: 250

Quote from: aistto on May 06, 2014, 04:04:12 AM

Power consumption from wall.

I measured it on one of my rig, not new (old):
- CPU: core2duo
- Mem: DDR2 2Gb
- PSU: Enermax 550W (old, even not bronze)
- VGA: 2*XFX280X GPU/MEM:1030/1500 VCDD:1v

miner setting GPU 0/1: -ss 1/2 -t default/8

Miner v2.0 375w
Miner v2.1 380w
Miner v3.0 405w
Miner v3.1b 410w
Miner v4.0 405w
Miner v5.0 400w
Miner v6.0 395w

Very ineresting, aistto.
Could you also measure some statistics for scrypt, scrypt-N, X11 and keccak.
If you can, of course.

I guess power consumption begins being very important for many miners...

aistto

legendary

Activity: 1001

Merit: 1005

Power consumption from wall.

I measured it on one of my rig, not new (old):
- CPU: core2duo
- Mem: DDR2 2Gb
- PSU: Enermax 550W (old, even not bronze)
- VGA: 2*XFX280X GPU/MEM:1030/1500 VCDD:1v

miner setting GPU 0/1: -ss 1/2 -t default/8

Miner v2.0 375w
Miner v2.1 380w
Miner v3.0 405w
Miner v3.1b 410w
Miner v4.0 405w
Miner v5.0 400w
Miner v6.0 395w

aikklond

legendary

Activity: 1148

Merit: 1000

Quote from: ozzy1926 on May 06, 2014, 01:33:05 AM

Quote from: Griffith on May 06, 2014, 01:17:49 AM

Quote from: Strannik-74 on May 05, 2014, 02:23:56 PM

Quote from: hero18688 on May 05, 2014, 12:54:08 PM

So higher CPD is better?

Coin Per Day =)

dude. CPD is chains per day... has nothing to do with the coins...

for real?

CPD = 10h Chains Per Day. A 10h Chain might get a block, if it is over the difficulty at the time (near 11 for the time beiing) or not.

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: Griffith on May 06, 2014, 01:17:49 AM

Quote from: Strannik-74 on May 05, 2014, 02:23:56 PM

Quote from: hero18688 on May 05, 2014, 12:54:08 PM

So higher CPD is better?

Coin Per Day =)

dude. CPD is chains per day... has nothing to do with the coins...

for real?

Griffith

legendary

Activity: 1400

Merit: 1000

Quote from: Strannik-74 on May 05, 2014, 02:23:56 PM

Quote from: hero18688 on May 05, 2014, 12:54:08 PM

So higher CPD is better?

Coin Per Day =)

dude. CPD is chains per day... has nothing to do with the coins...

SpeedDemon13

hero member

Activity: 518

Merit: 500

For fun, I tried to mine with a 6950 2GB and 6970. Got a TRT ~1000 and CPD~.3 to .4. LOL Definitely GCN cards are best to use for XPM GPU miners.

For the older cards, it only works for 2GB GDDR5 cards.

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: hero18688 on May 05, 2014, 12:54:08 PM

So higher CPD is better?

Coin Per Day =)

irritant

sr. member

Activity: 473

Merit: 250

Sodium hypochlorite, acetone, ethanol

Quote from: hero18688 on May 05, 2014, 12:54:08 PM

So higher CPD is better?

yes

hero18688

sr. member

Activity: 392

Merit: 250

So higher CPD is better?

as4uz

newbie

Activity: 43

Merit: 0

Strannik-74 and XPM-guru: what CPU do you have?

My miners disconnect after 24h, the miner is runing for more that 54 hours but the stats from ypool says that my workers are mining for like eight hours, it affects something or it's okay?

I get ~1.6CPD/R9 280x in low CPU usage mode (because I have an AMD Sempron 145).

@hero: yes, as far as I know.

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: XPM-guru on May 05, 2014, 07:35:34 AM

So, how much are you getting at these rates per GPU(280x)/24h? Is it worth mining anymore?

==Scrypt*1,5

XPM-guru

newbie

Activity: 44

Merit: 0

Quote from: Strannik-74 on May 05, 2014, 02:06:12 AM

My 280X give 189K 4ch/h & 2.2CPD (48h), but how about yours 4ch/h?
══════════════════════════════════════════════════════════════════════════════
Mon May 05 12:08:00 2014
New Block: 526211 - Current Diff: 10.881943
Total/Valid shares: [ 6664 / 6247 ] - Max diff: 10.890245
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 9008K] [ 6114] [ 510] [ 53] [ 3] [ 0] [ 0]
ch/h: [ 189049] [128.301] [ 10.702] [ 1.112] [ 0.063] [ 0.000] [ 0.000]
Estimated CPD: 2.2121, Average CPD: 1.5109, Mining time: 47:39
══════════════════════════════════════════════════════════════════════════════

So, how much are you getting at these rates per GPU(280x)/24h? Is it worth mining anymore?

nosaer

newbie

Activity: 38

Merit: 0

Quote from: Strannik-74 on May 05, 2014, 02:06:12 AM

My 280X give 189K 4ch/h & 2.2CPD (48h), but how about yours 4ch/h?
══════════════════════════════════════════════════════════════════════════════
Mon May 05 12:08:00 2014
New Block: 526211 - Current Diff: 10.881943
Total/Valid shares: [ 6664 / 6247 ] - Max diff: 10.890245
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 9008K] [ 6114] [ 510] [ 53] [ 3] [ 0] [ 0]
ch/h: [ 189049] [128.301] [ 10.702] [ 1.112] [ 0.063] [ 0.000] [ 0.000]
Estimated CPD: 2.2121, Average CPD: 1.5109, Mining time: 47:39
══════════════════════════════════════════════════════════════════════════════

Total/Valid shares: [ 1753 / 1628 ] - Max diff: 9.824959
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 2485K] [ 1690] [ 124] [ 13] [ 0] [ 0] [ 0]
ch/h: [ 159666] [108.551] [ 7.965] [ 0.835] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 1.8716, Average CPD: 0.0000, Mining time: 15:34

sometime give mi invalid shares

Strannik-74

full member

Activity: 348

Merit: 102

My 280X give 189K 4ch/h & 2.2CPD (48h), but how about yours 4ch/h?
══════════════════════════════════════════════════════════════════════════════
Mon May 05 12:08:00 2014
New Block: 526211 - Current Diff: 10.881943
Total/Valid shares: [ 6664 / 6247 ] - Max diff: 10.890245
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 9008K] [ 6114] [ 510] [ 53] [ 3] [ 0] [ 0]
ch/h: [ 189049] [128.301] [ 10.702] [ 1.112] [ 0.063] [ 0.000] [ 0.000]
Estimated CPD: 2.2121, Average CPD: 1.5109, Mining time: 47:39
══════════════════════════════════════════════════════════════════════════════

nosaer

newbie

Activity: 38

Merit: 0

hello

what im doing wrong?

1 rig

2x280x Asus C2T - 3.2 CPD after 14h of run ( average)
1x280x vapor-x - 0.0 CPD after 14h of run ( avarage)
CPU G3320

2 rig

2x208x Vapor-x 0.0 CPD after 11h of run ( avarage)
CPU G860

setting in .bat file

color 02
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u random -p superhardpass -di 2 -hc 256

why have all Vapor-x 0.0 CPD avarage ( estimated is 1,86) and card found some share.

thanks

murders10

member

Activity: 84

Merit: 10

Quote from: Claymore on May 03, 2014, 04:13:02 PM

Quote from: murders10 on May 03, 2014, 03:21:35 PM

hello everyone

Claymore thank u for the awesome Miner

So i don't know if I'm the only one who have this problem !!
every time i run the tool my drive crash had to run Cgminer or sgminer etc for like 5m then run the tool then get it to work ... Solo or Ypool same thing.
i found no other way to fix this problem i even refresh windows. windows 8 and 8.1 nothing
Catalyst 13.12 SDK 2.9
3x 280x Toxic

PS i run it one by one crash at the first run in Les then 30 sec .

Have you read readme file? Does "-hc 256" help?

didn't try it yet i really didn't get what -hc dos so i didn't try it but ill

thank u

incognitoworker ill turn off OC ... thank u

incognitoworker

hero member

Activity: 736

Merit: 500

Quote from: murders10 on May 03, 2014, 03:21:35 PM

hello everyone

Claymore thank u for the awesome Miner

So i don't know if I'm the only one who have this problem !!
every time i run the tool my drive crash had to run Cgminer or sgminer etc for like 5m then run the tool then get it to work ... Solo or Ypool same thing.
i found no other way to fix this problem i even refresh windows. windows 8 and 8.1 nothing
Catalyst 13.12 SDK 2.9
3x 280x Toxic

PS i run it one by one crash at the first run in Les then 30 sec .

Try leaving OC out, only controll temp with tool.
Worked on my rigg.
Happy mining

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: murders10 on May 03, 2014, 03:21:35 PM

hello everyone

Claymore thank u for the awesome Miner

So i don't know if I'm the only one who have this problem !!
every time i run the tool my drive crash had to run Cgminer or sgminer etc for like 5m then run the tool then get it to work ... Solo or Ypool same thing.
i found no other way to fix this problem i even refresh windows. windows 8 and 8.1 nothing
Catalyst 13.12 SDK 2.9
3x 280x Toxic

PS i run it one by one crash at the first run in Les then 30 sec .

Have you read readme file? Does "-hc 256" help?

murders10

member

Activity: 84

Merit: 10

hello everyone

Claymore thank u for the awesome Miner

So i don't know if I'm the only one who have this problem !!
every time i run the tool my drive crash had to run Cgminer or sgminer etc for like 5m then run the tool then get it to work ... Solo or Ypool same thing.
i found no other way to fix this problem i even refresh windows. windows 8 and 8.1 nothing
Catalyst 13.12 SDK 2.9
3x 280x Toxic

PS i run it one by one crash at the first run in Les then 30 sec .

Topic: Claymore XPM GPU Miner discussion - page 24. (Read 142100 times)