Please allow workernames as username, not only wallet addresses
bumping this once more
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 169. (Read 2145041 times)
bumping this once more
What is the hashrate for r9 390 and 390x should i move to xmr from zec ? I'm concerned about diff. Thx
i just tested on 390x out of the box stock settings gives me ~830h running stable for over 3h nowaltho evry rig with rx470 or 480 hangs whole rig between 10-60min of running on stock settings also, any tips anyone?
same here my 470 & 480 rigs are unstable for monero, i tried to reduce memory clock and increase voltage but no change,
they are all have modded bios for eth
hmmm... I have several rigs of rx400 modded bios, stable on XMR. same setup as ETH (1080MHz core and about 2000MHz mem), occasionally a tiny bit more voltage, still heavy UV
what hashrate for R9 480 ?
im getting 630 and i think something should be tweaked
mining XMR
im getting 700h on rx480 8gb - only mem straps copied, stock clocks, switched straight from zcashim getting 630 and i think something should be tweaked
mining XMR
where can i find the mem straps?
in the card's bios.. you can edit bios using PolarisBiosEditor and you can flash bios using ATIFlash.
never forget to make backup before do any changes.
What is the hashrate for r9 390 and 390x should i move to xmr from zec ? I'm concerned about diff. Thx
i just tested on 390x out of the box stock settings gives me ~830h running stable for over 3h nowaltho evry rig with rx470 or 480 hangs whole rig between 10-60min of running on stock settings also, any tips anyone?
same here my 470 & 480 rigs are unstable for monero, i tried to reduce memory clock and increase voltage but no change,
they are all have modded bios for eth
I am having a issue with monero mining on claymore where I get "Lowdifficultyshare" I have set my -a and my -h but still get the error and I have switched pools and drivers and claymore versions and still nothing. I am mining with one 7970 and one 7950.
I was getting the same errors right after switching over from mining ETH with Core/Clock speeds set at 1150/1950 (strap-1500 modded 470s). After seeing this, I went it and changed from 1150 to 1200 and have not seen that LowDiffShare error since... over 24 hours ago. Of course, upping to 1200 sucks more wattage but also gives a bit more hashes and no errors... and still my 6-card rig is at 830 watts, but 2 of the GPUs are not strap modded yet so after that and a bit of tweaking, pretty sure I can get it back in the mid 700's wattage wise. So, bottom line... try upping your core speed a bit and that should get rid of that error.
Is there some pool that shows rig names?
Iam on dwarf, and cant get my rigs name show up there... tryed "1" "rig1" nothing...
Iam on dwarf, and cant get my rigs name show up there... tryed "1" "rig1" nothing...
How did you set your wallet/pid/worker in start.bat?
This is an example: WALLET-ADDRESS.PERSONAL-PAYMENT-ID.WORKER-NAME
It is ok i think, but nothing showing
Code:
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u MyMoneroAdress.1 -p x
Hi All,
for those who have the 100% Fan Speed Problem with RX400 Cards, this is a bug in the Driver and it was solved until
Driver Version 16.11.4/.5
https://community.amd.com/thread/203282
Hashrate with Driver v16.11.5 is the same, I have test it. But the Problem with 100% fan Speed dissapeared ..
for those who have the 100% Fan Speed Problem with RX400 Cards, this is a bug in the Driver and it was solved until
Driver Version 16.11.4/.5
https://community.amd.com/thread/203282
Hashrate with Driver v16.11.5 is the same, I have test it. But the Problem with 100% fan Speed dissapeared ..
driver 16.11.5 the most stable. Hash rate may not be high, and less problems.
Hi All,
for those who have the 100% Fan Speed Problem with RX400 Cards, this is a bug in the Driver and it was solved until
Driver Version 16.11.4/.5
https://community.amd.com/thread/203282
Hashrate with Driver v16.11.5 is the same, I have test it. But the Problem with 100% fan Speed dissapeared ..
for those who have the 100% Fan Speed Problem with RX400 Cards, this is a bug in the Driver and it was solved until
Driver Version 16.11.4/.5
https://community.amd.com/thread/203282
Hashrate with Driver v16.11.5 is the same, I have test it. But the Problem with 100% fan Speed dissapeared ..
New year discount!
DevFee redirecter for Claymore's CryptoNote GPU Miner v9.6 !
Get all the bonus XMR you deserve.
Only 0.015 btc till dec 31 2016
PM me for details.
DevFee redirecter for Claymore's CryptoNote GPU Miner v9.6 !
Get all the bonus XMR you deserve.
Only 0.015 btc till dec 31 2016
PM me for details.
What is the hashrate for r9 390 and 390x should i move to xmr from zec ? I'm concerned about diff. Thx
i just tested on 390x out of the box stock settings gives me ~830h running stable for over 3h nowaltho evry rig with rx470 or 480 hangs whole rig between 10-60min of running on stock settings also, any tips anyone?
increase clocks on your rig... and check each card for failure. Get idea about which cards can run stable at high OC and which do not. Add corrections as required on your clocks
Usually I find the weaker cards this way. Those ones usually screw up the whole rig.
Miner is bad with RX480!
rx470 works as should going to 740h/s with -h 1024
for rx480 logicaly should be -h 1152 and around 800-820h/s, but best value is again -h 1024 where it hashes same as rx470.
rx470 works as should going to 740h/s with -h 1024
for rx480 logicaly should be -h 1152 and around 800-820h/s, but best value is again -h 1024 where it hashes same as rx470.
I am having a issue with monero mining on claymore where I get "Lowdifficultyshare" I have set my -a and my -h but still get the error and I have switched pools and drivers and claymore versions and still nothing. I am mining with one 7970 and one 7950.
why with these miner
my fan stop
and i did not '
have stable hashing power?>>>?>/.?>?.?.?>
i can not understand
the hashing power at pool
going for high to low
and then again from low to high
how i can fix that??'
my fan stop
and i did not '
have stable hashing power?>>>?>/.?>?.?.?>
i can not understand
the hashing power at pool
going for high to low
and then again from low to high
how i can fix that??'
what hashrate for R9 480 ?
im getting 630 and i think something should be tweaked
mining XMR
im getting 700h on rx480 8gb - only mem straps copied, stock clocks, switched straight from zcashim getting 630 and i think something should be tweaked
mining XMR
where can i find the mem straps?
what hashrate for R9 480 ?
im getting 630 and i think something should be tweaked
mining XMR
im getting 700h on rx480 8gb - only mem straps copied, stock clocks, switched straight from zcash im getting 630 and i think something should be tweaked
mining XMR
what hashrate for R9 480 ?
im getting 630 and i think something should be tweaked
mining XMR
im getting 630 and i think something should be tweaked
mining XMR
What is the hashrate for r9 390 and 390x should i move to xmr from zec ? I'm concerned about diff. Thx
i just tested on 390x out of the box stock settings gives me ~830h running stable for over 3h nowaltho evry rig with rx470 or 480 hangs whole rig between 10-60min of running on stock settings also, any tips anyone?
how do you mine dwarpool directly to bittrex? i see the commands but they are not clear
What is the hashrate for r9 390 and 390x should i move to xmr from zec ? I'm concerned about diff. Thx
ok thanks i will try it 
Jump to: