Author

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 170. (Read 2145059 times)

sr. member
Activity: 857
Merit: 262
December 29, 2016, 11:09:08 AM
Also what I must done
At watt tool
For fixed my fan to work ok
I can not understand what must do
Does not have automatic option for fan
So how I can fix it HuhHuh??

if the biult-in cooling works properly you just set target temperature for the card, and two values Max and Min for fan speed. And it will try (very efficiently) to stick to your target.  
I've got here 70C as a target temp:


and here as well:
legendary
Activity: 2408
Merit: 1004
December 29, 2016, 10:38:25 AM
Also what I must done
At watt tool
For fixed my fan to work ok
I can not understand what must do
Does not have automatic option for fan
So how I can fix it HuhHuh??
full member
Activity: 232
Merit: 100
December 29, 2016, 10:16:51 AM
How to see temps on ethman screen but without managing fans?
sr. member
Activity: 857
Merit: 262
December 29, 2016, 09:50:33 AM
What driver version do you use?

My rig keeps restarting on win10.

16.7.2
IMO drivers no matter.

This miner obviously needs an urgent update!

@Claymore: any chance you plan to give it a boost, at least your recent wrapper, speed/stability improvements also highly appreciated, but less critical.
-r 1 (machine reboot instead of miner restart) and rx400 temps for Remote Manager at least. (GPU turnin on/off is needed as well)
Also if better detection of "low difficulty shares" is possible... 
newbie
Activity: 14
Merit: 0
December 29, 2016, 09:37:35 AM
What driver version do you use?

My rig keeps restarting on win10.

16.7.2
newbie
Activity: 21
Merit: 0
December 29, 2016, 09:01:39 AM
I mean, the problem with 100% fan is in MSI AfterBurner.
I skip on Sapphire TriXX. 10 hours without problem (RX480 8GB).

What driver version do you use?

My rig keeps restarting on win10.
newbie
Activity: 23
Merit: 0
December 29, 2016, 08:54:51 AM
I have a problem with Dwarfpool trying to update / authorize your payment option. To place my ip:  "Wrong data. Access denied. Please try again".  Where to look for the full ip address?

I am using the wallet: mymonero.com And do not put a workernumber there is problem with that?

Is it normal for the worker to be very slow when browsing windows? Was not slow to mine with Claymore's ZCash AMD GPU Miner v9.2


legendary
Activity: 2408
Merit: 1004
December 29, 2016, 08:48:09 AM
how install watt tool?Huh
full member
Activity: 213
Merit: 100
December 29, 2016, 08:36:11 AM
Please allow workernames as username, not only wallet addresses

I think this should be addressed to pool owners (like you) - may be in XMR main thread here in bitcointalk?
It is really unbelievable that in 2017 we have a top 3 alt coin that is mined in pools that DO NOT offer workername, nor they offer workers monitoring. The only one offering this (from the pools with big hashes) is dwarf - well not real workername, but only numbers - which is not convenient when you have 10+ rigs. But dwarf sucks most of the time, so it is really crappy mining monero...
sr. member
Activity: 857
Merit: 262
December 29, 2016, 07:12:00 AM
I mean, the problem with 100% fan is in MSI AfterBurner.
I skip on Sapphire TriXX. 10 hours without problem (RX480 8GB).

Try to use WattTool instead of Afterburner/Trixx/etc.

Yes Watttool is gold. And NEVER use afterburner with rx400 - it fucks up cards badly - DDU and afterburner uninstall may not even help to fix fan issues.

Not long ago on a mixed system with 470 and 370 I've used AB to control 370 fan, as it works there better. And the only way after that that I could manage rx400 cooling is when AB was loaded with the system and applied custom fan pattern, which was pain in the ass to do properly, as it required a single graph for 3 types of cards. Also the smoothest control of fans in the built-in one ... It took sometime to get rid of the necessity of the AB app on autostart.
full member
Activity: 160
Merit: 100
December 29, 2016, 06:54:13 AM
I mean, the problem with 100% fan is in MSI AfterBurner.
I skip on Sapphire TriXX. 10 hours without problem (RX480 8GB).

Try to use WattTool instead of Afterburner/Trixx/etc.
full member
Activity: 160
Merit: 100
December 29, 2016, 06:51:50 AM
Is there some pool that shows rig names?

Iam on dwarf, and cant get my rigs name show up there... tryed "1" "rig1" nothing...

How did you set your wallet/pid/worker in start.bat?

This is an example: WALLET-ADDRESS.PERSONAL-PAYMENT-ID.WORKER-NAME
newbie
Activity: 14
Merit: 0
December 29, 2016, 06:43:38 AM
I mean, the problem with 100% fan is in MSI AfterBurner.
I skip on Sapphire TriXX. 10 hours without problem (RX480 8GB).
member
Activity: 112
Merit: 10
December 29, 2016, 06:20:32 AM
I too had fan issues yesterday with rx470s

luckily they went to 100%. fixed with a reboot. speedfan wasn't able to actually change fan speeds until after reboot.
Same problem on rx 480 nitro
I changed to 9.5 , less speed but safe.

Claymor - enough for Thailand to relax, let people new  miner!
member
Activity: 69
Merit: 10
December 29, 2016, 05:57:43 AM
Dwarf is really going haywire, not showing stats for a few hours now, and not paying...

I think it is OK now...
member
Activity: 161
Merit: 10
December 29, 2016, 05:44:13 AM
Dwarf is really going haywire, not showing stats for a few hours now, and not paying...
newbie
Activity: 9
Merit: 0
December 29, 2016, 05:07:43 AM
Claymore,

I can't use -cclock and -mclock on Claymore's CryptoNote GPU Miner v9.6

OS : Wins10 64bit
RX480 x 6

Help me please...
member
Activity: 161
Merit: 10
December 29, 2016, 04:26:49 AM
I have 16.11.2/4 and all these fan speed issues people are talking about aren't happening.
newbie
Activity: 4
Merit: 0
December 29, 2016, 04:12:50 AM
For everyone with fan problem, try to update driver to 16.11.x
Jump to: