Claymore's CryptoNote AMD GPU Miner v11.3 - page 200.

adamvp

hero member

Activity: 1246

Merit: 708

Quote from: ps_jb on September 04, 2016, 05:28:56 PM

Can I use my polo wallet with dwarfpool?

I'm getting an error while trying to start mining

Of course.
Just don't forget to add your payment id after dot...
It should look like wallet.paymentid.yourworker

ps_jb

hero member

Activity: 742

Merit: 500

Can I use my polo wallet with dwarfpool?

I'm getting an error while trying to start mining

the_darkness

member

Activity: 79

Merit: 10

Perhaps odd question but wonder if anyone has any thoughts. It is the middle of a heat wave here and I would like to keep my 390X going but it is getting uncomfortably warm in the room it is in. Is there any way for me to reduce the GPU utilization a bit? E.g. set it at 50% of full use for a few days? I get around 850 h/s at 100% utilization. I have changed to low intensity mode and fiddled around with -h, -a, and -li and through all permutations the GPU still has 100% utilization and never goes below around 760 h/s.

TheLAWNoob

member

Activity: 92

Merit: 10

ASUS RX 470 underclocked 1100 core 1800 mem

540 H/s

140W from wall with EVGA 1000W G2, Celeron Dual core, ASrock H97 Mobo. ETH + SC uses about 180W.

Does Monero like fast memory? High core clocks?

nerdralph

sr. member

Activity: 588

Merit: 251

Quote from: adaseb on September 03, 2016, 02:48:04 AM

Quote from: citronick on September 03, 2016, 02:38:59 AM

Quote from: adaseb on September 03, 2016, 02:37:10 AM

Quote from: citronick on September 03, 2016, 01:05:46 AM

I have tested it on 1 x Sapphire R7 370 Nitro (... its old test rig but with Win7, i5 and 32GB RAM Cry

).

So I set h=1024 instead of the default 512 and removed intensity settings

I get 373 hash -- is this normal?

Miner runs well with occasional stratum disconnect from cryptonight.usa.nicehash.com:3355
but no problem, connecting back and mining as usual.

Claymore, With XMR to roof now, this is a good miner to improve on. And maybe 3rd coin with CDM 7.0 Grin

Update: 1 ETH = 1 XMR... amazing

With my 370 I get 500 hash.

wow 500 is good, any OC? drivers 15.12?

15.7.1
MSI 2GB 370
+20 Power Limit
1150/1500

They also get exactly +15mh/s for ETH. Exact Power Draw.

Pretty impressive since the 280x is only 550

The best I can get with Wolf's miner under Linux is 405 (clocked at 1125/1500). I guess I'll have to try Claymore's (assuming there is a Linux version).

ivomm

legendary

Activity: 1891

Merit: 3096

All good things to those who wait

Claymore, could you add the option (like the eth miner) "-r 1" closes miner and execute "reboot.bat" file in the miner directory if some GPU failed? Thanks!

chinh.daongoc

jr. member

Activity: 64

Merit: 1

Hello Claymore

Could you update -mport in the 9.6 version? I have to use teamview to check every rig Sad

Thanks

mabturm

newbie

Activity: 7

Merit: 0

My GPU miner was working great until I also installed the claymore cryptonote CPU miner.
Suddenly the claymore GPU miner crashes on start. Also the claymore ethereum miner stopped load, crashing the whole system when I load it.

Any Ideas what I can change to fix this?

dexxa05

member

Activity: 87

Merit: 10

Hi guys,

What is your result (Hashrate / Power Consumption) with RX 480 (REF) and which BIOS do you use ?

Thx in advance.

adamvp

hero member

Activity: 1246

Merit: 708

And another my question
Does this app have build-in temp monitor, and if yes how to check temp in miner?

gregor12

newbie

Activity: 52

Merit: 0

Quote from: Potap on September 04, 2016, 02:38:57 AM

Claymore's CryptoNote GPU Miner v9.5

280x - ~64% load ,have a day works,win8.1x64 ,15.12 Huh

If you set power limit to like -50% gpu usage will go to 100%, but hashrate wont change. (I used MSI afterburn)

Termie

sr. member

Activity: 642

Merit: 292

a few results from me:
- ~860 H/s with R9 Nano @ 1100 MHz, only 92W-94W core power -> very cool
- ~770 H/s with R9 290x @ 1050 MHz, 85W-95W, also not bad
- all with -h 1024, each other value = dropping of hashrate -> 1376 at 290x useless here

All results with v9.3 and unknown Nanos, they bring slightly better hashrates than v9.4+ with
known R9 Fury/Nano.

Much too much fee shares if connected to a VarDif pool with different dif's (e.g. 20000 me,
5000 fee). In this case, sometimes the half of CMD window is filled with fee shares. Sometimes
pools even quit connection. No problems if own and fee's dif are the same or fixed.

adamvp

hero member

Activity: 1246

Merit: 708

For me I get 544H/s on 280x r9 xfx
and 432H/s on 370 r7 gigabyte

So very good - whattomine shows me 280x gives 470 only
:beer: for you Claymore
all stock settings,

and if I would like to overclock what to overclock? GPU core or RAM frequency?

rawbert

full member

Activity: 199

Merit: 100

Quote from: go6ooo1212 on September 03, 2016, 03:03:30 PM

..where can we see some profitability calculator for monero?

https://www.cryptocompare.com/mining/calculator/xmr

Potap

newbie

Activity: 38

Merit: 0

Claymore's CryptoNote GPU Miner v9.5

280x - ~64% load ,have a day works,win8.1x64 ,15.12 Huh

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: Tmdz on September 03, 2016, 07:11:22 PM

Quote from: VirosaGITS on September 03, 2016, 06:03:41 PM

Could we get a updated Linux version? XMR has gone up, and some of us would like to switch our farms to XMR at the moment. Ideally a 15.12 version?

(I think you said to use max 14.7 but here's my report anyways for 15.x);
The 9.1 version has issues with some GPUs, i have my 290/390, my 380 and some random 280x get lowdifficultyshare errors for 100% of their hash. I tried the -a 3 option, it doesnt fix it.

Cheers.

Don't worry about it, by the time a updated linux version comes out the profit on this will be the same as ethash.

Yep, probably. But people are asking for it so...

ayiphelmy

copper member

Activity: 416

Merit: 105

i'm using 6x 390x and always got buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Low difficulty share"}}
and i try -a 3 its work no more "Low difficulty share" message but the hasrate drop only 780 h/s per card... this is must bug
and i miining in dwarf pool
can u fix this Claymore??

Thx in advance

ekiller

legendary

Activity: 2240

Merit: 1112

LLP Programming & Electronics

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Stratum - connecting to 'mine.moneropool.com' <138.201.31.13> port 3333

miner : 9.5Beta
2x GPU 280X
1x 7970
1x R9 390
OS : w7 x64
pool : mine.moneropool.com
Driver : Crimson 15.12

AcidMiner

newbie

Activity: 31

Merit: 0

Hello Claymore,

can you add bikercoin to your GPU and CPU Mining software please?
Bikercoin is a cryptonote based coin, so you add the support to your cryptonote mining software. But it would be very nice if you can add Bikercoin support to ETH/DCR/SIA Miner too.

I'm the owner of an bikercoin pool.
You can reach my Pool at: http://bikercoin.acidminer.org

You can contact me here by answer my pm.
kind regards

BTCBusinessConsult

sr. member

Activity: 546

Merit: 250

Active Trading on EPIC5k and Spectre.Ai

Getting ~740 h/s on AMD 480.

Everything stock, Mem at 2200, undervolted to 960 mv. No custom bios.

Not sure if anybody cared or was wondering. Originally was getting 640 h/s

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 200. (Read 2145059 times)