Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1406.

phzi

hero member

Activity: 700

Merit: 500

Quote from: Claymore on April 12, 2016, 02:32:39 PM

v1.1:

- Fixed issue with rejected shares for dwarfpool (and for other pools that use similar code).
- Fixed issue with f2pool pool.
- Added "-worker" option.
- "-dcri" option: max value is 500 now.
- Added "Rejected shares" info.

f2pool working now, but --eworker option doesn't have any effect there (all shares show up under the blank worker).

psk5000

newbie

Activity: 9

Merit: 0

Quote from: tflux99 on April 12, 2016, 03:12:42 PM

trying it now with 3x r7 370 + 1x r9 280x beta 1.1 on ethermine.org

i lost 25% with claymore
(4x r7 370)

Quote from: Claymore on April 12, 2016, 03:08:48 PM

Quote from: psk5000 on April 12, 2016, 02:46:37 PM

qtminer = 60mh/s
Claymore = 45mh/s

why ?

(i have 4x r7 370 and crimson 15.12)

Did you get 45MH for dual-mining mode?

yes

edit : I'm testing now only eth and i have 55 mh/s

tflux99

member

Activity: 89

Merit: 10

trying it now with 3x r7 370 + 1x r9 280x beta 1.1 on ethermine.org

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: psk5000 on April 12, 2016, 02:46:37 PM

qtminer = 60mh/s
Claymore = 45mh/s

why ?

(i have 4x r7 370 and crimson 15.12)

Did you get 45MH for dual-mining mode?

psk5000

newbie

Activity: 9

Merit: 0

Quote from: phzi on April 12, 2016, 02:50:06 PM

Quote from: psk5000 on April 12, 2016, 02:46:37 PM

qtminer = 60mh/s
Claymore = 45mh/s

why ?

(i have 4x r7 370 and crimson 15.12)

Read the known issues...

-25% omg

soulistyce

hero member

Activity: 701

Merit: 511

ive tested on windows with my 6 r9 280x, at first it all went well, but i didnt detected any improvement to the speed i had i usualy get 123mhs with your miner i get only 112mhs, but still if it mines also decred i want to use it but got no luck....as everyone knows ethminer on some gpus on windows gives problems like stop mining after some hours, dag sometimes as to be rebuild and computer freezes.... and even with your miner i still have this problems....on linux i have no problem and it runs pretty well for days so if you can...
please compile a version for ubuntu or give source so we can compile it. Wink

phzi

hero member

Activity: 700

Merit: 500

Quote from: psk5000 on April 12, 2016, 02:46:37 PM

qtminer = 60mh/s
Claymore = 45mh/s

why ?

(i have 4x r7 370 and crimson 15.12)

Read the known issues...

psk5000

newbie

Activity: 9

Merit: 0

qtminer = 60mh/s
Claymore = 45mh/s

why ?

(i have 4x r7 370 and crimson 15.12)

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: restless on April 12, 2016, 02:39:50 PM

using worker-name as password is better - SOME shares were counted.
But after 15min I realized something is wrong:
- PC1 (1x290), 11 shares reported from miner, 1 share from DP
- PC2 (2x265) - 4 shares from miner, 2 shares from DP

And waiting another 15min (miners stopped) didn't help - no new shares counted by DP

I'll try it on coinotron this evening as well

RoyaLunique

sr. member

Activity: 383

Merit: 272

Thanks...

restless

legendary

Activity: 1151

Merit: 1001

PS: EVERYTHING BELOW IS FOR v.1.0 !

using worker-name as password is better - SOME shares were counted.
But after 15min I realized something is wrong:
- PC1 (1x290), 11 shares reported from miner, 1 share from DP
- PC2 (2x265) - 4 shares from miner, 2 shares from DP

And waiting another 15min (miners stopped) didn't help - no new shares counted by DP

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v1.1:

- Fixed issue with rejected shares for dwarfpool (and for other pools that use similar code).
- Fixed issue with f2pool pool.
- Added "-worker" option.
- "-dcri" option: max value is 500 now.
- Added "Rejected shares" info.

FUBAR-BDHR

hero member

Activity: 702

Merit: 1000

★The Best Adult Video Chat Platform★

Will there be a version of this for pools that use username/password instead of address for ethereum? I don't want to join another pool just to test software.

restless

legendary

Activity: 1151

Merit: 1001

well... 3h later and altho miner says I have accepted shares, dwarfpool says I gad 0 shares for last 3h

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xMyWallet -epsw x -dpool http://dcr.suprnova.cc:9112 -dwal user.worker -dpsw x

What am i doing wrong Sad

DCR mining was ok - shares counted at dcr.suprnova

PS: using mode 1
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0x479bb7dc620957adab4f079b9dd2a481f8b837c4 -epsw x -mode 1
Produced accepted shares showing in my wallet at dwarfpool.
And 'x' was worker name
changing x to 7850 - confirmed that DP is accepting password as worker name in mode 1

Next I'll try again mode 0 with dual-mining and -epsw using worker name

murders10

member

Activity: 84

Merit: 10

Quote from: Marvell1 on April 12, 2016, 01:11:21 PM

Quote from: Strannik-74 on April 12, 2016, 11:05:40 AM

Quote from: murders10 on April 12, 2016, 10:47:58 AM

and please watchdog option that would help allot.

use nnCron, Create a 2 macro :
1 Kills miner process every 30 minutes .
2 Check whether the miner started every minute and if not then runs it .
In the end, it turns out that every 30 minutes a miner will be restarted .

Thats a waste of time , if its an issue it needs to be fixed by the the developer , I mean hes already taking 2% why should users spend time hacking together fixes for know bugs.

thank you Strannik i already using .bat script Wink

Marvell he is already working on it, so give him i brake.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: Strannik-74 on April 12, 2016, 11:05:40 AM

Quote from: murders10 on April 12, 2016, 10:47:58 AM

and please watchdog option that would help allot.

use nnCron, Create a 2 macro :
1 Kills miner process every 30 minutes .
2 Check whether the miner started every minute and if not then runs it .
In the end, it turns out that every 30 minutes a miner will be restarted .

Thats a waste of time , if its an issue it needs to be fixed by the the developer , I mean hes already taking 2% why should users spend time hacking together fixes for know bugs.

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: SIRacer09 on April 12, 2016, 11:20:39 AM

I would like to use the -cclock and -mclock for my cards, but I have a mix of 3 7950s and 2 R9 280x. How can I tell what card is what number? (0-4) Thanks!

use -di 0 and see what card is loaded, then add -di 01 and watch what the new card to load and so 4 times.
At all will leave 10 minutes maximum. This is elementary = )

SIRacer09

newbie

Activity: 55

Merit: 0

I would like to use the -cclock and -mclock for my cards, but I have a mix of 3 7950s and 2 R9 280x. How can I tell what card is what number? (0-4) Thanks!

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: murders10 on April 12, 2016, 10:47:58 AM

and please watchdog option that would help allot.

use nnCron, Create a 2 macro :
1 Kills miner process every 30 minutes .
2 Check whether the miner started every minute and if not then runs it .
In the end, it turns out that every 30 minutes a miner will be restarted .

murders10

member

Activity: 84

Merit: 10

Quote from: Claymore on April 12, 2016, 09:20:07 AM

Quote from: Strannik-74 on April 12, 2016, 09:17:21 AM

After DEVfee on Ethereum rejected, we have to restart miner?

No, you don't need to restart it. "DevFee: stop mining" means only that it stops mining for devfee (after 36 or 72 seconds of devfee mining), it does not stop main mining.
Rejected shares is a compatibility issue of my miner, I'm working on this issue, I'll post an update in several hours.

Thank u for that i have to restart the miner every 2h or so.
and please watchdog option that would help allot.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1406. (Read 6590757 times)