so, how much must do on decred one 280x ?, i got 300-350 mh/s ?
PS. Never mine this shit decred, normal speed for one 280x is 1200 , one my friend told me (hero member, close to legendary, real my friend). Of course, this shit have fee, soo, i suggest you to stop all this
.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1402. (Read 6590215 times)
April 13, 2016, 05:16:39 PM
April 13, 2016, 04:53:58 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?
I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.
Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).
I did not check it yet. Why do you want to mine ETH solo?
Cause i don't like pools, because of stales, rejects bad ping and etc. I was mining in solo with ethminer about 2 months and it's very well. I like your solo versions of XPM miners. Just like solo)) Maybe that's an answer.
Forgot to add ddos, steal, hack pools.
April 13, 2016, 04:51:52 PM
So far I tried your miner on 2 different than versions - 15.7 , 16.3.1 - it always works 
April 13, 2016, 04:44:37 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?
I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.
Well, you can try, it may work. I have not tried that.
April 13, 2016, 04:44:03 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?
I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.
Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).
I did not check it yet. Why do you want to mine ETH solo?
April 13, 2016, 04:43:39 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?
I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.
April 13, 2016, 04:39:23 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?
I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.
Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).
April 13, 2016, 04:21:09 PM
Is it possible to mine EXP with this? I'm trying in differents ways but seems it's not possible.
Cannot create big DAG.
Claymore, did you lock this miner to eth only?
Cannot create big DAG.
Claymore, did you lock this miner to eth only?
April 13, 2016, 04:16:22 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?
I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.
April 13, 2016, 04:10:47 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?
April 13, 2016, 02:34:45 PM
Future plans for linux?
Probably never, none of his releases ever go for linux.
You need to install Windows.
You are not correct, I have Linux version of XMR miner. Probably I will port this miner to Linux, but it will take some time so I'm going to add some important useful features to Windows version firstly.
Sounds good. Thanks. Using the Decred calculator( http://decred-calc.cryptohub.info) and the GPU hash rates from the list. Is it me or Decred according to the calculator will double profits from mining when combined with ETH?
April 13, 2016, 01:52:41 PM
If I had 3x 270x + 3x 280x on one rig, is it possible to do "-mode 0" for 3x 280x, and "-mode 1" for 3x 270x at the same time 
It should be possible, assuming 270x are indexed as 0,1,2 and 280x are 3,4,5 for 3x270x use:
-di 012 -mode 0 -dir "c:\DAGs\270x"
for 280x use:
-di 345 -mode 1 -dir "c:\DAGs\280x"
April 13, 2016, 01:50:33 PM
use hi diff port or another pool
April 13, 2016, 01:08:22 PM
Why so many rejected?
DCR - Total Speed: 1084.617 Mh/s, Total Shares: 691, Rejected: 114
DCR: GPU0 272.606 Mh/s, GPU1 266.236 Mh/s, GPU2 273.063 Mh/s, GPU3 272.712 Mh/s
DCR - Total Speed: 1084.617 Mh/s, Total Shares: 691, Rejected: 114
DCR: GPU0 272.606 Mh/s, GPU1 266.236 Mh/s, GPU2 273.063 Mh/s, GPU3 272.712 Mh/s
April 13, 2016, 11:52:12 AM
Well, done Claymore, working very well on R9 290 overclocked to 1020mhz.
Still, uses Claymore GPU Control software for overclocking my GPU, from 2 years ago
Still, uses Claymore GPU Control software for overclocking my GPU, from 2 years ago
April 13, 2016, 11:27:56 AM
+1
April 13, 2016, 11:25:25 AM
If I had 3x 270x + 3x 280x on one rig, is it possible to do "-mode 0" for 3x 280x, and "-mode 1" for 3x 270x at the same time
April 13, 2016, 10:30:55 AM
on ethermine.org all shares got rejected anybody else the same 
it worked b4 but now all is rejected didnt change anything...?
it worked b4 but now all is rejected didnt change anything...? April 13, 2016, 10:20:27 AM
Oh, just wait a some time, and the port 2032 start works!
0 rejects, but failed to connect sometime. What -dcrt optimal for this port?
0 rejects, but failed to connect sometime. What -dcrt optimal for this port?
April 13, 2016, 09:56:19 AM
I need full command line to check it.
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0xce0999a83d1473aa4a8f0f6705bff4c35375eb04 -epsw x -dpool dcr.coinmine.pl:2032 -dwal alevlaslo.1 -dpsw x -dcri 100
on 1999 port 10% bad shares
Jump to: