Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 154.

iRonNuke

jr. member

Activity: 98

Merit: 6

Quote from: Claymore on April 24, 2019, 02:19:14 PM

I don't like flashing bios so I solved this problem finally.
v12.1 is almost ready, I'm going to release it in 3-4 days.
It cannot perform runtime tuning of memory timing registers, it will be added a bit later, in another update.
But it can apply entire straps on-the-fly (Windows only). Currently for Polaris cards only, may be later I will add support for other cards too. So you can use stock vbios and don't flash your cards to try new straps.
Instead, you just put new strap string to config file and the miner applies it immediately in runtime.
If specified strap is not working it will not cause any problems, after reboot you will have stock strap again because bios is not changed.
This way you can keep stock bios and also test new straps safe and easy.

Great job, looking forward to test this!

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

I don't like flashing bios so I solved this problem finally.
v12.1 is almost ready, I'm going to release it in 3-4 days.
It cannot perform runtime tuning of memory timing registers, it will be added a bit later, in another update.
But it can apply entire straps on-the-fly (Windows only). Currently for Polaris cards only, may be later I will add support for other cards too. So you can use stock vbios and don't flash your cards to try new straps.
Instead, you just put new strap string to config file and the miner applies it immediately in runtime.
If specified strap is not working it will not cause any problems, after reboot you will have stock strap again because bios is not changed.
This way you can keep stock bios and also test new straps safe and easy.

herrdrone

sr. member

Activity: 633

Merit: 267

Quote from: Digital_Seytan on April 20, 2019, 01:51:45 PM

Quote from: herrdrone on April 16, 2019, 09:58:38 PM

Quote from: AVP on April 16, 2019, 02:09:50 PM

Does this latest v12 version support UBIQ mining?

No, ubiq's POW is ubqhash currently not supported by Claymore.

you have to use phoenix miner, tt-miner or ubqminer.

Yes phoenixminer works fine wit mining Ubiq Latest versions miners look https://latest-miners.wixsite.com/latestminer

I rather go to phoenixminer's official thread: https://bitcointalksearch.org/topic/phoenixminer-62c-fastest-ethereumethash-miner-with-lowest-devfee-winlinux-2647654
or TT-Miner: https://bitcointalksearch.org/topic/m.45491991
or ubiqminer's github: https://github.com/ubiq/ubqminer

Edited.

Digital_Seytan

jr. member

Activity: 222

Merit: 2

[email protected]

Quote from: herrdrone on April 16, 2019, 09:58:38 PM

Quote from: AVP on April 16, 2019, 02:09:50 PM

Does this latest v12 version support UBIQ mining?

No, ubiq's POW is ubqhash currently not supported by Claymore.

you have to use phoenix miner, tt-miner or ubqminer.

Yes phoenixminer works fine wit mining Ubiq Latest versions miners look https://latest-miners.wixsite.com/latestminer

percy_tc

full member

Activity: 584

Merit: 106

Quote from: shadabahmed on April 19, 2019, 12:17:58 PM

Quote from: ilverro on April 10, 2019, 07:15:43 AM

I have a problem with my Sapphire RX 570 Nitro+ 8GB: why I get 29 MH/s on Callisto but only 12 MH/s on ETH and ETC??

try with different drivers. problem will solve same happend to me.

are u sure your driver in compute mode? i doubt it. Dag size is much higher on ETH / ETC than Callisto, thats why this could happen i guess.

shadabahmed

hero member

Activity: 616

Merit: 500

Quote from: ilverro on April 10, 2019, 07:15:43 AM

I have a problem with my Sapphire RX 570 Nitro+ 8GB: why I get 29 MH/s on Callisto but only 12 MH/s on ETH and ETC??

try with different drivers. problem will solve same happend to me.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: DrX on April 19, 2019, 03:29:11 AM

Got in the problems while adding new features?

No hurry

but...

No worries, it just takes more time than I expected, so I'm still working on it.

DrX

member

Activity: 233

Merit: 20

Got in the problems while adding new features?

No hurry

but...

DJSHANGHAI888

newbie

Activity: 1

Merit: 0

Hi Claymore. First off, nice work. Your Miner is the most efficient I have seen/deployed for ETH based tokens.
I have a project I am deploying that I need some specific features enabled.
I do not want to disclose publicly, but if you can PM me, I would like to ask your help.
You will be compensated above and beyond the 1% dev fee.
Thank you sir,
DJ

PS Not really a Newbie but have no idea what my Username/PW is..lol

herrdrone

sr. member

Activity: 633

Merit: 267

Quote from: AVP on April 16, 2019, 02:09:50 PM

Does this latest v12 version support UBIQ mining?

No, ubiq's POW is ubqhash currently not supported by Claymore.

you have to use phoenix miner, tt-miner or ubqminer.

AVP

newbie

Activity: 96

Merit: 0

Does this latest v12 version support UBIQ mining?

Miner Addict

newbie

Activity: 31

Merit: 0

Btr20

newbie

Activity: 2

Merit: 0

Hello, I want to ask you some questions about MSI 390x,
Who Mine on MSI 390x.My 390x give out 23 megahesh,what do I need to do to get more?

I have a miner claymore v 11.6 installed drivers 15.12 windows 8.1 x64.
Tell me what I'm doing wrong or what needs to be done so that they get more,because RX 470 570 mines 29 mh,And 390x produces only 23 megahesh
I’m sorry English don’t know to use google translator,thank you all for your attention I would be grateful !

Code:

04:44:49:345 b24 Check and remove old log files...
04:44:49:548 b24 args: -mode 1 -r 0 -epool eu1.ethermine.org:4444 -ewal 0xd6aa0cc5d74708828bbcc3a0ce58974ac3c23c8d.Rig-1 -epsw ї -dcri 10
04:44:49:548 b24
04:44:49:564 b24 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
04:44:49:564 b24 є Claymore's Dual GPU Miner - v11.6 є
04:44:49:564 b24 є ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK є
04:44:49:564 b24 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
04:44:49:564 b24
04:44:49:564 b24 b571
04:44:49:782 b24 ETH: 1 pool is specified
04:44:49:782 b24 Main Ethereum pool is eu1.ethermine.org:4444
04:44:53:220 b24 OpenCL platform: AMD Accelerated Parallel Processing
04:44:53:220 b24 OpenCL initializing...

04:44:53:220 b24 AMD Cards available: 5
04:44:53:220 b24 GPU #0: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 1:0:0)
04:44:53:220 b24 GPU #0 recognized as Radeon 390X
04:44:53:220 b24 GPU #1: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 3:0:0)
04:44:53:220 b24 GPU #1 recognized as Radeon 390X
04:44:53:236 b24 GPU #2: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 4:0:0)
04:44:53:236 b24 GPU #2 recognized as Radeon 390X
04:44:53:236 b24 GPU #3: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 5:0:0)
04:44:53:236 b24 GPU #3 recognized as Radeon 390X
04:44:53:236 b24 GPU #4: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 6:0:0)
04:44:53:236 b24 GPU #4 recognized as Radeon 390X
04:44:53:236 b24 POOL/SOLO version
04:44:53:236 b24 Platform: Windows
04:44:53:611 b24 start building OpenCL program for GPU 0...
04:44:56:330 b24 done
04:44:56:564 b24 start building OpenCL program for GPU 1...
04:44:56:814 b24 done
04:44:57:049 b24 start building OpenCL program for GPU 2...
04:44:57:299 b24 done
04:44:57:517 b24 start building OpenCL program for GPU 3...
04:44:57:767 b24 done
04:44:57:986 b24 start building OpenCL program for GPU 4...
04:44:58:236 b24 done
04:44:58:471 b24 GPU #0: algorithm ASM 1
04:44:58:502 b24 GPU #1: algorithm ASM 1
04:44:58:549 b24 GPU #2: algorithm ASM 1
04:44:58:580 b24 GPU #3: algorithm ASM 1
04:44:58:611 b24 GPU #4: algorithm ASM 1
04:44:58:627 b24 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
04:44:58:627 b24 No NVIDIA CUDA GPUs detected.
04:44:58:627 b24 Total cards: 5
04:44:58:689 b24 No NVIDIA cards in the list, NVML library will not be used.
04:44:59:799 b24 SSL: Imported 28 certificates from local storage
04:44:59:908 a78 ETH: Stratum - connecting to 'eu1.ethermine.org' <172.65.207.106> port 4444 (unsecure)
04:44:59:924 b24 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

04:44:59:924 b24 ETH: eth-proxy stratum mode
04:44:59:924 b24 Watchdog enabled
04:44:59:924 b24 Remote management (READ-ONLY MODE) is enabled on port 3333
04:44:59:924 b24

04:44:59:939 a78 sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0xd6aa0cc5d74708828bbcc3a0ce58974ac3c23c8d.Rig-1", "ї"], "id": 2, "method": "eth_submitLogin"}

04:44:59:955 a78 ETH: Stratum - Connected (eu1.ethermine.org:4444) (unsecure)
04:45:00:049 a78 buf: {"id":2,"jsonrpc":"2.0","result":true}

04:45:00:049 a78 ETH: Authorized
04:45:00:049 a78 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

04:45:00:111 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x56f512e68aef535aa52717e29a57d174a362ceaa7742a42cdbaac810c0bffc3d","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}

04:45:00:143 bfc Setting DAG epoch #252...
04:45:01:658 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x62e6d36e4e874649338fbcc003cc2d0e7500379019dc757f368b9a336479b3a0","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}

04:45:01:658 a78 ETH: 04/16/19-04:45:01 - New job from eu1.ethermine.org:4444
04:45:01:658 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:01:658 a78 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:01:658 a78 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
04:45:03:565 4fc Setting DAG epoch #252 for GPU0
04:45:03:565 bfc Setting DAG epoch #252 for GPU3
04:45:03:565 994 Setting DAG epoch #252 for GPU1
04:45:03:565 4fc Create GPU buffer for GPU0
04:45:03:580 bd4 Setting DAG epoch #252 for GPU4
04:45:03:580 bd4 Create GPU buffer for GPU4
04:45:03:580 994 Create GPU buffer for GPU1
04:45:03:580 bfc Create GPU buffer for GPU3
04:45:03:580 708 Setting DAG epoch #252 for GPU2
04:45:03:596 708 Create GPU buffer for GPU2
04:45:05:659 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x5e14a866631f377e608c132947221b2b30fd66376c083dda1aad6b27f6e05e28","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}

04:45:05:659 a78 ETH: 04/16/19-04:45:05 - New job from eu1.ethermine.org:4444
04:45:05:659 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:05:659 a78 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:05:659 a78 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
04:45:09:534 4fc GPU0 DAG creation time - 5891 ms
04:45:09:534 4fc Setting DAG epoch #252 for GPU0 done
04:45:09:581 708 GPU2 DAG creation time - 5850 ms
04:45:09:581 bfc GPU3 DAG creation time - 5855 ms
04:45:09:581 708 Setting DAG epoch #252 for GPU2 done
04:45:09:596 994 GPU1 DAG creation time - 5845 ms
04:45:09:581 bfc Setting DAG epoch #252 for GPU3 done
04:45:09:596 bd4 GPU4 DAG creation time - 5863 ms
04:45:09:596 994 Setting DAG epoch #252 for GPU1 done
04:45:09:596 bd4 Setting DAG epoch #252 for GPU4 done
04:45:09:643 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xaa1c79d6b6fd7a0ea14395f75d673e1dc402e6144f908a43671244429886c4da","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}

04:45:09:643 a78 ETH: 04/16/19-04:45:09 - New job from eu1.ethermine.org:4444
04:45:09:643 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:09:643 a78 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:09:643 a78 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
04:45:10:128 a78 ETH: checking pool connection...
04:45:10:128 a78 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

04:45:10:190 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xaa1c79d6b6fd7a0ea14395f75d673e1dc402e6144f908a43671244429886c4da","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}

04:45:11:206 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x2d6c078431c61524d28cd65076a18eb8bb7b07634f315c3a6418541d8a8c725a","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a1a"]}

04:45:11:222 a78 ETH: 04/16/19-04:45:11 - New job from eu1.ethermine.org:4444
04:45:11:222 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:11:222 a78 ETH - Total Speed: 116.124 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:11:222 a78 ETH: GPU0 23.241 Mh/s, GPU1 23.063 Mh/s, GPU2 23.283 Mh/s, GPU3 23.274 Mh/s, GPU4 23.264 Mh/s
04:45:11:268 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x400ec5c6c2fb863cc770915194595aa67efc10dca96b9e9f9bcc1a093648aa03","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a1a"]}

04:45:11:268 a78 ETH: 04/16/19-04:45:11 - New job from eu1.ethermine.org:4444
04:45:11:268 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:11:268 a78 ETH - Total Speed: 116.124 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:11:268 a78 ETH: GPU0 23.241 Mh/s, GPU1 23.063 Mh/s, GPU2 23.283 Mh/s, GPU3 23.274 Mh/s, GPU4 23.264 Mh/s
04:45:15:238 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x06cd875880b29cad073c769bf7d9114dc16af59090d478ad95af657c6db83994","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a1a"]}

04:45:15:238 a78 ETH: 04/16/19-04:45:15 - New job from eu1.ethermine.org:4444
04:45:15:238 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)

One more question,sometimes the miner restarts without a clear reason for me.
I need your help.
Please help me deal with this problem.

Code:

06:25:10:830 a78 ETH: 04/16/19-06:25:10 - SHARE FOUND - (GPU 0)
06:25:10:865 a78 buf: {"id":10,"jsonrpc":"2.0","result":true}

06:25:10:866 a78 ETH: Share accepted (63 ms)!

06:25:13:588 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x21f2c7369151d729ec5bc9784c5fe203d9ff9aa6a8f4732a6a0f6a5604002a15","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}

06:25:13:590 a78 ETH: 04/16/19-06:25:13 - New job from eu1.ethermine.org:4444
06:25:13:592 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
06:25:13:594 a78 ETH - Total Speed: 115.922 Mh/s, Total Shares: 161, Rejected: 0, Time: 01:40
06:25:13:596 a78 ETH: GPU0 23.246 Mh/s, GPU1 22.845 Mh/s, GPU2 23.286 Mh/s, GPU3 23.281 Mh/s, GPU4 23.264 Mh/s
06:25:13:726 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xde89670f359f9f569380b94e4f2812969c4280251e98cb49f5ba301b3f5fadd1","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}

06:25:13:728 a78 ETH: 04/16/19-06:25:13 - New job from eu1.ethermine.org:4444
06:25:13:730 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
06:25:13:733 a78 ETH - Total Speed: 115.922 Mh/s, Total Shares: 161, Rejected: 0, Time: 01:40
06:25:13:735 a78 ETH: GPU0 23.246 Mh/s, GPU1 22.845 Mh/s, GPU2 23.286 Mh/s, GPU3 23.281 Mh/s, GPU4 23.264 Mh/s
06:25:15:296 830 em hbt: 0, fm hbt: 79,
06:25:15:297 830 watchdog - thread 0 (gpu0), hb time 562
06:25:15:299 830 watchdog - thread 1 (gpu0), hb time 62
06:25:15:300 830 watchdog - thread 2 (gpu1), hb time 172
06:25:15:302 830 watchdog - thread 3 (gpu1), hb time 672
06:25:15:303 830 watchdog - thread 4 (gpu2), hb time 562
06:25:15:305 830 watchdog - thread 5 (gpu2), hb time 62
06:25:15:307 830 watchdog - thread 6 (gpu3), hb time 62
06:25:15:308 830 watchdog - thread 7 (gpu3), hb time 562
06:25:15:310 830 watchdog - thread 8 (gpu4), hb time 62
06:25:15:312 830 watchdog - thread 9 (gpu4), hb time 562
06:25:17:680 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xea35df9d9810089fcbe32eadbee4526211599137f194c7791f6c1334f7bebc2b","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}

06:25:17:683 a78 ETH: 04/16/19-06:25:17 - New job from eu1.ethermine.org:4444
06:25:17:685 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
06:25:17:688 a78 ETH - Total Speed: 116.127 Mh/s, Total Shares: 161, Rejected: 0, Time: 01:40
06:25:17:689 a78 ETH: GPU0 23.246 Mh/s, GPU1 23.055 Mh/s, GPU2 23.288 Mh/s, GPU3 23.276 Mh/s, GPU4 23.262 Mh/s
06:25:20:485 a78 ETH: checking pool connection...
06:25:20:486 a78 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

06:25:20:540 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xea35df9d9810089fcbe32eadbee4526211599137f194c7791f6c1334f7bebc2b","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}

06:25:20:920 82c GPU0 t=66C fan=100%, GPU1 t=67C fan=100%, GPU2 t=68C fan=100%, GPU3 t=53C fan=100%, GPU4 t=57C fan=100%
06:25:21:687 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xce95458d49ee166b259bd9af45db17f28da9b85192e6f267ee7040f496407013","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}

06:25:21:689 a78 ETH: 04/16/19-06:25:21 - New job from eu1.ethermine.org:4444
06:25:21:691 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
06:25:21:693 a78 ETH - Total Speed: 116.052 Mh/s, Total Shares: 161, Rejected: 0, Time: 01:40
06:25:21:696 a78 ETH: GPU0 23.245 Mh/s, GPU1 22.985 Mh/s, GPU2 23.284 Mh/s, GPU3 23.275 Mh/s, GPU4 23.264 Mh/s

LJLT

newbie

Activity: 48

Merit: 0

4 cards, AMD drivers from april 3 19 something

My miners hangs and restart computer after yous a cuople of minutesm mining. Down is the last lanes of the log cant figure it out? can somebody give me hand please...

16:16:25:101   118c   ETH - Total Speed: 114.579 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:03
16:16:25:101   118c   ETH: GPU0 28.889 Mh/s, GPU1 27.704 Mh/s, GPU2 31.089 Mh/s, GPU3 26.898 Mh/s
16:16:25:882   6d4   GPU 0 temp = 74, old fan speed = 34, new fan speed = 80

16:16:25:886   6d4   GPU 1 temp = 80, old fan speed = 46, new fan speed = 80

16:16:25:890   6d4   GPU 2 temp = 73, old fan speed = 40, new fan speed = 80

16:16:25:895   6d4   GPU 3 temp = 80, old fan speed = 44, new fan speed = 80

16:16:26:466   118c   buf: {"id":0,"jsonrpc":"2.0","result":["0x988ee19e667cd52b28e719a17f7581e616e509a29e9dc3617382628e9a0634a0","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x737e50"]}

16:16:26:467   118c   ETH: 04/14/19-16:16:26 - New job from us1.ethermine.org:5555
16:16:26:468   118c   target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
16:16:26:469   118c   ETH - Total Speed: 114.604 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:03
16:16:26:470   118c   ETH: GPU0 28.911 Mh/s, GPU1 27.708 Mh/s, GPU2 31.074 Mh/s, GPU3 26.911 Mh/s
16:16:26:509   118c   buf: {"id":0,"jsonrpc":"2.0","result":["0xf1645ac530886a05e24866ab35494e2ad1a1cc5a6d95e071960b8f534e3b3831","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x737e50"]}

16:16:26:509   118c   ETH: 04/14/19-16:16:26 - New job from us1.ethermine.org:5555
16:16:26:510   118c   target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
16:16:26:511   118c   ETH - Total Speed: 114.604 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:03
16:16:26:512   118c   ETH: GPU0 28.911 Mh/s, GPU1 27.708 Mh/s, GPU2 31.074 Mh/s, GPU3 26.911 Mh/s
16:16:28:899   6d4   GPU 0 temp = 75, old fan speed = 33, new fan speed = 80

16:16:28:904   6d4   GPU 1 temp = 80, old fan speed = 47, new fan speed = 80

16:16:28:908   6d4   GPU 2 temp = 73, old fan speed = 40, new fan speed = 80

16:16:28:912   6d4   GPU 3 temp = 80, old fan speed = 45, new fan speed = 80

16:16:30:492   118c   buf: {"id":0,"jsonrpc":"2.0","result":["0xbe5c60b0beba91936d202873f7366547f25b22f8bc929f720e8e253441409f74","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x737e50"]}

16:16:30:493   118c   ETH: 04/14/19-16:16:30 - New job from us1.ethermine.org:5555
16:16:30:494   118c   target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
16:16:30:495   118c   ETH - Total Speed: 114.594 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:03
16:16:30:496   118c   ETH: GPU0 28.905 Mh/s, GPU1 27.690 Mh/s, GPU2 31.095 Mh/s, GPU3 26.903 Mh/s
16:16:31:917   6d4   GPU 0 temp = 75, old fan speed = 33, new fan speed = 80

16:16:31:921   6d4   GPU 1 temp = 81, old fan speed = 48, new fan speed = 80

16:16:31:925   6d4   GPU 2 temp = 73, old fan speed = 40, new fan speed = 80

16:16:31:929   6d4   GPU 3 temp = 80, old fan speed = 45, new fan speed = 80

Dennicex

jr. member

Activity: 393

Merit: 1

Coinsbit exchange

Quote from: lisasteca on April 12, 2019, 02:44:09 PM

Yes i think you are right , i have tried some mining with new altocoin using laptop really wasting time! For mining you hve to buy special graphic card

It seems to me that mining on a laptop is a silly idea. Even a cool gaming laptop will not be able to provide its owner with the profitability of mining.

manicMinerBob

newbie

Activity: 1

Merit: 0

Hi

Any idea why my mining has stopped working? I have a GTX 1080ti and it's been working for months, but now it just does this

Code:

12:06:15:462 1768 Check and remove old log files...
12:06:15:462 1768 args: -epool eu1.ethermine.org:4444 -ewal 0xC0Ea0a187ee54AAcensored61deb1827 -epsw x
12:06:15:462 1768
12:06:15:462 1768 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:06:15:462 1768 º Claymore's Dual GPU Miner - v12.0 º
12:06:15:462 1768 º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
12:06:15:462 1768 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
12:06:15:478 1768
12:06:15:478 1768 b615
12:06:15:696 1768 ETH: 1 pool is specified
12:06:15:696 1768 Main Ethereum pool is eu1.ethermine.org:4444
12:06:15:696 1768 DCR: 0 pool is specified

any help greatly appreciated!

thanks

lisasteca

sr. member

Activity: 574

Merit: 250

Quote from: aygabtu on April 10, 2019, 12:22:30 AM

Quote from: lisasteca on April 09, 2019, 05:20:09 PM

Quote from: Miner Addict on April 08, 2019, 10:47:33 PM

Quote from: lisasteca on April 08, 2019, 02:49:27 PM

Guys could you help , do you think mining ethereum is still good? what tutorial would you reccomand for people who start mining ethereum?

Just try look at Mininghelp with google

Thanks for the adivice , i did look and seems to be nice to me to start! Do you think you can still mine ETH with laptop still?

Laptop? Ugh....if you're going to mine, take it seriously and get something you can slap 1 or more decent graphics cards in. Mining with a laptop isn't going to earn you anything and may reduce the life of it if you're not careful.

Yes i think you are right , i have tried some mining with new altocoin using laptop really wasting time! For mining you hve to buy special graphic card

Digital_Seytan

jr. member

Activity: 222

Merit: 2

[email protected]

when comes the new version of claymoreminer dev this version starts the rig way too many, or crashes.

https://latest-miners.wixsite.com/latestminer

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: Tokechan on April 12, 2019, 12:25:32 AM

Hello! Do I need to restart miner when I send new config.txt through Remote Manager or it applies automatically the moment i sent it?

You have to restart it, it cannot apply automatically

Tokechan

newbie

Activity: 5

Merit: 0

Hello! Do I need to restart miner when I send new config.txt through Remote Manager or it applies automatically the moment i sent it?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 154. (Read 6590718 times)