It would be great if the miner would show shares accepted per GPU
press 's', it does already 
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 158. (Read 6590718 times)
March 06, 2019, 12:53:13 PM
March 06, 2019, 05:29:50 AM
It would be great if the miner would show shares accepted per GPU, something like this:
ETH: GPU0 15.149 Mh/s (20), GPU1 15.083 Mh/s (17), GPU2 15.046 Mh/s (24), GPU3 15.088 Mh/s (10)
ETH: GPU0 15.149 Mh/s (20), GPU1 15.083 Mh/s (17), GPU2 15.046 Mh/s (24), GPU3 15.088 Mh/s (10)
March 06, 2019, 02:53:12 AM
what i have seen it has same hash as in ETH, so my assumption is not possible to dual mine as both use same mem mining. it looks to me like mining ETH+ETC at once, you know... but i can be wrong of course, im not a pro.
ZIL PoW window is just several minutes for about 2 hours. it could switch to ZIL mining like it acts with devfee March 05, 2019, 05:11:01 PM
Hello, Mr @Claymore!
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?
what i have seen it has same hash as in ETH, so my assumption is not possible to dual mine as both use same mem mining. it looks to me like mining ETH+ETC at once, you know... but i can be wrong of course, im not a pro.
March 05, 2019, 10:41:04 AM
Hello, Mr @Claymore!
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?
March 05, 2019, 08:02:55 AM
AltCoinLog about Claymore's Dual Miner
Link to download the original version of the program, instructions for setting up and optimizing software. Basic commands and frequent beginner problems. Ready Bat files for mining.
The article is written in Russian
https://altcoinlog.com/claymore-s-dual-miner-nastroyka/
Link to download the original version of the program, instructions for setting up and optimizing software. Basic commands and frequent beginner problems. Ready Bat files for mining.
The article is written in Russian
https://altcoinlog.com/claymore-s-dual-miner-nastroyka/
March 03, 2019, 03:04:14 PM
hello,
i would like to ask some questions:
- when i start to mine, how long it takes to start dev mining?
- when i start stop miner, does it reset counter for dev mining? for example im mining with another miner, then it starts with claymore, after couple hours, it switch back and then after couple hours again with claymore, so does it reset dev mining counter? or another example, im fine tunning and i left miner run for half hour or less, does the counter reset all the time?
thank you
i would like to ask some questions:
- when i start to mine, how long it takes to start dev mining?
- when i start stop miner, does it reset counter for dev mining? for example im mining with another miner, then it starts with claymore, after couple hours, it switch back and then after couple hours again with claymore, so does it reset dev mining counter? or another example, im fine tunning and i left miner run for half hour or less, does the counter reset all the time?
thank you
March 03, 2019, 04:12:04 AM
Pascal Coin changed algo to the CPU friendly RandomHash in December 2018
The coin can no longer be dual mined.
The coin can no longer be dual mined.
I've recently setup Claymore v12.0 for Dual Ethereum+Pascal except I can't find a pool that appears to work with it.
I've tried nanopool, coinotron, & c3pool all with the same results lots of accepted shares and too many rejected shares:
When Claymore launches, it authorizes to the pools fine, but on the first batch it and everyone after that, it gets disconnected from the pool for too many rejects. I know they were going through in some fashion in that I got warnings on my c3pool setup of extremely high rejection rates for my account.
I've turned off overclocking on the GPU. I have a nVidia GTX 1070 that I'm using, I also have a 1060 I'm not using because I'm running Windows 10.
I have been able to connect with nicehash, but that seems to be so little compared to the hashrate 100-200 Mh/s for Pascal.
Any ideas? Thanks
I've tried nanopool, coinotron, & c3pool all with the same results lots of accepted shares and too many rejected shares:
Code:
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: Share rejected (16 ms)!
PASC: Share rejected (47 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (16 ms)!
PASC: Share rejected (16 ms)!
PASC: Share rejected (16 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: Share rejected (31 ms)!
PASC: Share rejected (62 ms)!
PASC: Too many rejects from pool, disconnect...
PASC: - connection in 20 sec...
ETH: 02/24/19-12:50:21 - New job from us1.ethermine.org:5555
ETH - Total Speed: 28.831 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04
ETH: GPU0 28.831 Mh/s
PASC - Total Speed: 182.597 Mh/s, Total Shares: 244, Rejected: 143
PASC: GPU0 182.597 Mh/s
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: Share rejected (16 ms)!
PASC: Share rejected (47 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (16 ms)!
PASC: Share rejected (16 ms)!
PASC: Share rejected (16 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: Share rejected (31 ms)!
PASC: Share rejected (62 ms)!
PASC: Too many rejects from pool, disconnect...
PASC: - connection in 20 sec...
ETH: 02/24/19-12:50:21 - New job from us1.ethermine.org:5555
ETH - Total Speed: 28.831 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04
ETH: GPU0 28.831 Mh/s
PASC - Total Speed: 182.597 Mh/s, Total Shares: 244, Rejected: 143
PASC: GPU0 182.597 Mh/s
When Claymore launches, it authorizes to the pools fine, but on the first batch it and everyone after that, it gets disconnected from the pool for too many rejects. I know they were going through in some fashion in that I got warnings on my c3pool setup of extremely high rejection rates for my account.
I've turned off overclocking on the GPU. I have a nVidia GTX 1070 that I'm using, I also have a 1060 I'm not using because I'm running Windows 10.
I have been able to connect with nicehash, but that seems to be so little compared to the hashrate 100-200 Mh/s for Pascal.
Any ideas? Thanks
February 28, 2019, 08:41:28 AM
February 27, 2019, 09:18:54 AM
Hey folks,
currently mining at 170Mh/s with 6*rx 470 4GB (MSI Gaming X), that's roughly 28.3Mh/s per card with 870W measured from the wall (total power consumption).
We can go a bit higher in terms of hashrate but we only have a 1000W Power Supply and we don't want to take any risks.
In terms of clocks and wattage, our cards are at 1100Mhz and 1050mV for the core and 2050Mhz and 1000mV for the memory.
Few questions:
1. Is it safe to draw ~870W from the wall, 24/7 with a 1000W PSU (Aerocool Gold+)
2. ~170Mh/s for 870W, is it a good ratio or do we have room to optimize the hashrate (without impacting the electricity consumption) ?
currently mining at 170Mh/s with 6*rx 470 4GB (MSI Gaming X), that's roughly 28.3Mh/s per card with 870W measured from the wall (total power consumption).
We can go a bit higher in terms of hashrate but we only have a 1000W Power Supply and we don't want to take any risks.
In terms of clocks and wattage, our cards are at 1100Mhz and 1050mV for the core and 2050Mhz and 1000mV for the memory.
Few questions:
1. Is it safe to draw ~870W from the wall, 24/7 with a 1000W PSU (Aerocool Gold+)
2. ~170Mh/s for 870W, is it a good ratio or do we have room to optimize the hashrate (without impacting the electricity consumption) ?
1. First of all. 1000W PSU meens that it can support 1000W output load , if its gold+ i think you current load is 870*0.95=~820 Watt of 1000 W PSU ability - No problem
2. Im using a lot of 4 Gb 470x cards, and usualy drive them in 1120/900 2000-2100/900 from 28 to 31 Mhs ( depends on vendor). On my mesurement one card eats 110-120 Watt itself.
BR.
February 26, 2019, 09:02:51 AM
Yes you can
Can I mine eth and verge coin in the same time?
February 26, 2019, 07:08:30 AM
Can I mine eth and verge coin in the same time?
February 26, 2019, 05:14:52 AM
it seems that version 12.0 does not work well with latest Nvidia linux driver 418.43. It exits right after create buffer & setting DAG epoch on P104. P106 fine.
version 11.9 works like a charm
version 11.9 works like a charm
February 24, 2019, 12:58:19 PM
I've recently setup Claymore v12.0 for Dual Ethereum+Pascal except I can't find a pool that appears to work with it.
I've tried nanopool, coinotron, & c3pool all with the same results lots of accepted shares and too many rejected shares:
When Claymore launches, it authorizes to the pools fine, but on the first batch it and everyone after that, it gets disconnected from the pool for too many rejects. I know they were going through in some fashion in that I got warnings on my c3pool setup of extremely high rejection rates for my account.
I've turned off overclocking on the GPU. I have a nVidia GTX 1070 that I'm using, I also have a 1060 I'm not using because I'm running Windows 10.
I have been able to connect with nicehash, but that seems to be so little compared to the hashrate 100-200 Mh/s for Pascal.
Any ideas? Thanks
I've tried nanopool, coinotron, & c3pool all with the same results lots of accepted shares and too many rejected shares:
Code:
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: Share rejected (16 ms)!
PASC: Share rejected (47 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (16 ms)!
PASC: Share rejected (16 ms)!
PASC: Share rejected (16 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: Share rejected (31 ms)!
PASC: Share rejected (62 ms)!
PASC: Too many rejects from pool, disconnect...
PASC: - connection in 20 sec...
ETH: 02/24/19-12:50:21 - New job from us1.ethermine.org:5555
ETH - Total Speed: 28.831 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04
ETH: GPU0 28.831 Mh/s
PASC - Total Speed: 182.597 Mh/s, Total Shares: 244, Rejected: 143
PASC: GPU0 182.597 Mh/s
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:20 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: Share rejected (16 ms)!
PASC: Share rejected (47 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (16 ms)!
PASC: Share rejected (16 ms)!
PASC: Share rejected (16 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: 02/24/19-12:50:21 - SHARE FOUND - (GPU 0)
PASC: Share rejected (0 ms)!
PASC: Share rejected (31 ms)!
PASC: Share rejected (62 ms)!
PASC: Too many rejects from pool, disconnect...
PASC: - connection in 20 sec...
ETH: 02/24/19-12:50:21 - New job from us1.ethermine.org:5555
ETH - Total Speed: 28.831 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04
ETH: GPU0 28.831 Mh/s
PASC - Total Speed: 182.597 Mh/s, Total Shares: 244, Rejected: 143
PASC: GPU0 182.597 Mh/s
When Claymore launches, it authorizes to the pools fine, but on the first batch it and everyone after that, it gets disconnected from the pool for too many rejects. I know they were going through in some fashion in that I got warnings on my c3pool setup of extremely high rejection rates for my account.
I've turned off overclocking on the GPU. I have a nVidia GTX 1070 that I'm using, I also have a 1060 I'm not using because I'm running Windows 10.
I have been able to connect with nicehash, but that seems to be so little compared to the hashrate 100-200 Mh/s for Pascal.
Any ideas? Thanks
February 24, 2019, 11:38:44 AM
hey
im thinking to switch from cryptonight to ETH and was wondering whats the Hashrate + Power Usage for vegas 56/64 at the moment with this miner?
thx for an answer in advance
im thinking to switch from cryptonight to ETH and was wondering whats the Hashrate + Power Usage for vegas 56/64 at the moment with this miner?
thx for an answer in advance
Try a multi-miner that will benchmark all miners and algos and mine what is the most profitable. You might be surprised
https://github.com/yuzi-co/Forager/releases
February 24, 2019, 11:33:00 AM
Anyone else having low ETH hashrate on ETHOS? I'm getting around 9 mhs per AMD card, s/b 22-27. Both Claymore and ETHMiner have the same issue, so I'm wondering if there is a settings fix....
Yesterday's new Epoch made 4 of my 5 3GB 1060s drop to about 8 mhs (from 18) using nanominer (only miner that still works for 3gb cards afaik). February 24, 2019, 11:26:52 AM
Anyone else having low ETH hashrate on ethOS? I'm getting around 9 mhs per AMD card, s/b 22-27. Both Claymore and ETHMiner have the same issue, so I'm wondering if there is a settings fix....
February 23, 2019, 10:28:55 AM
hey
im thinking to switch from cryptonight to ETH and was wondering whats the Hashrate + Power Usage for vegas 56/64 at the moment with this miner?
thx for an answer in advance
im thinking to switch from cryptonight to ETH and was wondering whats the Hashrate + Power Usage for vegas 56/64 at the moment with this miner?
thx for an answer in advance
February 23, 2019, 09:49:46 AM
ok, so i had it running all night having stripped the rig down, with just 1 card. stable so i just added a second card. lets see if that is ok
February 22, 2019, 11:06:39 AM
It is not dual, but is good, cause you don’t loose more than 1-2 min mining every ~2 hours
Try it and make you calcs, you’ll see that ZIL will pay the electric bills
Ah, now I understand, thank you! It seems there is a huge profitability during the 2-minute window every 2 hours, isn't it! I need to do some calculations, but I am not able find a profitability calculator - the one I found is https://www.cryptostar.asia/calculator/Zilliqa but I am not sure about an accuracy. Rig from 6 gpus would earn $10 a month - not sure if this calculation is by nonstop mining or by 2-minute window every 2 hours.Try it and make you calcs, you’ll see that ZIL will pay the electric bills
This is the official ZIL calc
https://docs.google.com/spreadsheets/d/1iA3DvXMiAql6bf1mGHHxfGLICm0wZ2Gav5HzRkP81j4/edit#gid=884391795
But, its about your luck to find an accepted share in the *99th ZIL block
My experience: 3 rigs, so, ~550 Mhs in total, around 6.000 ZIL a month
Not bad at all
Jump to: