Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 741. (Read 6590757 times)

claymore zcash miner works, but because it regulates automatically the buffer down. claymore ethereum miner 9.7 says it supports also rx 560, that's why i'm puzzled. by the way, mining zcash (at least with my rx 560) is completely uninteresting concerning profitability. is there any of those you listed quite as profitable to mine as ethereum?

or try to mine any Equihash coin like Zecash, ZEN, ZClassic or Hush

Dag size is around 2.04GB or 2.20GB. You don't have enough vram on a 2GB GPU!

Try mining UBIQ (1GB) or Expanse (not sure what size, but it should be below 2GB).

hey new to all this...

i'm using a GTX980 to mine eth and lbry; however, i'm only getting 2.9 Mh/s on each

I saw:

how do i get the old drivers installed? Nvidia website only goes to 372.54

I have 384 installed, i'm assuming this is why i have such low hash-rates

hi guys, ist my first time posting here, excuse me if im doing something wrong.

i got a rig with rx560 2gb. i run claymore v9.7. i get always the same Errors with buffer Problems. i tried all Kind of Things like Setting virtual Memory to 16 or to 2000. nothing works. also tried the cmd commands that some other users said would work...set to 100 etc. but nothing. i hope you guys can help me, would be much appreciated.
here the Errors in specific:

PU4 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU2 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU4 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU2 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

Yes. Add "-allpools 1 -allcoins 1" in your batch file.

I am in need of a little help:

I am getting EthDcrMiner64.exe has stopped working.  Has anyone found a way to resolve this issue?

That really is strange. My rigs are producing more shares per hour, per GPU, than that - at 28.8Mh/s. Let's go along with this and assume it's NOT a Photoshop job. Maybe a super fast hash, lots of bad incorrect shares, still don't understand how it would stay alive for 150 hours. Doesn't really matter of it's not producing good shares.

Do a search on Youtube for your motherboard! Every, Tom, Dick and Harry is doing uploads on building mining rigs - bound to be one using your motherboard! LOL

Ive been mining with my gaming desktop for few months now and this week i built a rig of 4x GTX 1070 with BIOSTAR TB250 running on Windows 10.

However, I have encounter some issue and wish someone can help me out..

I wouldn't run more than 2 GPU or it will crash every 20 minutes or so. When I plugged 3 GPU in and turned on for 10-20 minutes, the blue screen of death shows up smostly with stop code "Critical structure corruption" & "Memory management". I am just using Claymore dual mining ETH+SIA without any OC and the Windows still crash.

I have tried to update every driver I would find in Windows and also flashing the latest BIOS. Done the chkdsk and memory diagnostic, got nothing.... Enabled the mining mode in BIOS and set every PCIe to GEN1.. Set virtual memory to 16gb too.

For my gaming desktop I dun recall any specific driver or software needed to install for using claymore right?
Also, the Mobo have 2 aux power plug, do any one know what those are for? I plugged them in anyways...

Anyone can help??


Mobo: BIOSTAR TB250-BTC
RAM: 8gb DDR4 2133
HDD: 120gb SSD
GPU: GTX1070 6gb OC x4
CPU: G3930
PSU: Cooler Master 1200w

You can use another mining software like sgminer or gominer

Is there a way to only mine Siacoin instead of only dual mining with it?

Someone knows why im trying to use -cvddc 950 on my rx580 and when I open claymore Windows crash

Thanks

Actually I have experienced this as well. With some (AMD) cards when they are running at 100% I can lower the voltage a bit more than when starting them from 0 to 100%. I think it is a normal behaviour and the problem is that the power delivery on the GPUs is not fast enough to keep up with the power demand. Maybe a future BIOS update for your cards will resolve this issue if the manufacturer sees it. I think there is nothing wrong with your cards.

Check you net. FAILOVER's means loosing connection with pools.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 01EA810aDefbee5d3fB8c10d6513691357587290 -epsw x -allcoins 1 -allpools 1 -ejobtimeout 60 -r 1

Hey Claymore, we need a decent C11 miner for ChainCoin (CHC).

Hi !
When to defee with music coin?

Can you white down an example please.

Try adding "-allpools 1 -allcoins 1" to your bat file.