Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 738.

seventux

newbie

Activity: 79

Merit: 0

Need help here. My 1070 is doing 31mh/s on windows 7 but sadly windows 7 only detects 5 of my gpu. I then try windows 10 pro. With the latest driver it's able to recognised 7 gpu out of 8 but the hashrate is only 2mh/s each. The gpu on the m.2 is not being detected as well.. help..

Are you using Windows 10 64 bit version 1607 above?

bkbirge

sr. member

Activity: 1197

Merit: 482

Quote from: ?? on ??

Quote from: bkbirge on July 17, 2017, 11:02:32 AM

Quote from: ?? on ??

Need help here. My 1070 is doing 31mh/s on windows 7 but sadly windows 7 only detects 5 of my gpu. I then try windows 10 pro. With the latest driver it's able to recognised 7 gpu out of 8 but the hashrate is only 2mh/s each. The gpu on the m.2 is not being detected as well.. help..

You need creator's update for win10, do a google.

Ok thanks for your reply. So the current nvidia driver is fine yeah?

Works for me, I'm using whatever the latest drivers are.

bkbirge

sr. member

Activity: 1197

Merit: 482

Quote from: ?? on ??

Need help here. My 1070 is doing 31mh/s on windows 7 but sadly windows 7 only detects 5 of my gpu. I then try windows 10 pro. With the latest driver it's able to recognised 7 gpu out of 8 but the hashrate is only 2mh/s each. The gpu on the m.2 is not being detected as well.. help..

You need creator's update for win10, do a google.

parentibule

full member

Activity: 406

Merit: 100

Quote from: scryptr on July 17, 2017, 09:43:08 AM

Quote from: parentibule on July 17, 2017, 09:05:11 AM

Hi,
For a 1060, what driver is better to install on a Debian? Packages from contrib/non-free or drivers from nvidia?

FOR BEST PERFORMANCE, NVIDIA--

I have never mined crypto with anything else. --scryptr

Ok, I started with contrib, it's version 375.66-1. I have 18.9MH/s + 315MH/s DCR without OC (I don't find how to OC on Debian 9 Sad

)

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: parentibule on July 17, 2017, 09:05:11 AM

Hi,
For a 1060, what driver is better to install on a Debian? Packages from contrib/non-free or drivers from nvidia?

FOR BEST PERFORMANCE, NVIDIA--

I have never mined crypto with anything else. --scryptr

parentibule

full member

Activity: 406

Merit: 100

Hi,
For a 1060, what driver is better to install on a Debian? Packages from contrib/non-free or drivers from nvidia?

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: tdguchi on July 17, 2017, 06:49:55 AM

Quote from: scryptr on July 17, 2017, 12:32:57 AM

Quote from: tdguchi on July 16, 2017, 09:21:33 PM

Hi, i have a rx 580 Nitro+ 4Gb gpu, with a power supply of 650w

if I only use ethereum mode, all its fine (24mh/s) but, when I try dual mining, after a short time, my pc reboots, could it be caused by lack of current or voltage?

I run the miner only with required parameters, epool dpool wallets, and passwords, my rx 580 is NOT modded and running at 60-64ºC

Could anyone help me with that?

Also.. which pool is the best for 1 GPU?

Thanks

NOT ENOUGH POWER--

You need a 1000W PSU for 5 to 6 GPUS. A PSU needs to have more capacity than the maximum power draw for ALL of your GPUs combined. The highest efficiency is at about 60-70 percent of the rated capacity of the PSU.

You can not get by without overloading and burning out a low-power, low efficiency PSU. 5 x 150W equals 750W, and that is greater than 650W (your PSU). A low-wattage algorithm may work for a while, but the PSU will still burn out. It could also explode or catch fire.

I no longer buy cheap, unrated PSUs. Stick with Gold, or Platinum, from a reliable manufacturer with a soiid warranty. A PSU will really explode if over-worked. --scryptr

yeah, 1000w for 5 o 6 gpu, but I only have one, that should be enough...or not?

YOU SHOULD BE GOOD--

In your case, I would begin checking for another hardware problem. Overheating, or a poor connection somewhere. It still could be the PSU, if your PC has a bargain PSU. --scryptr

Gunna01

sr. member

Activity: 306

Merit: 251

Quote from: papampi on July 17, 2017, 06:45:30 AM

Quote from: Gunna01 on July 17, 2017, 06:25:31 AM

So my system is crashing when creating the dag when running 6 GPU, 5 has been solid all week. Thought it was a riser but put a new one in with the same result.

Any suggestions?

Have you tried -lidag option ?

Code:

-lidag low intensity mode for DAG generation, it can help with OC or weak PSU. Supported values are 0, 1, 2, 3, more value means lower intensity. Example: "-lidag 1".
You can also specify values for every card, for example "-lidag 1,0,3". Default value is "0" (no low intensity for DAG generation).

Also try -gser

Code:

-gser this setting can improve stability on multi-GPU systems if miner hangs during startup. It serializes GPUs initalization routines. Use "-gser 1" to serailize some of routines and "-gser 2" to serialize all routines.
Default value is "0" (no serialization, fast initialization).

Cheers, managed to get it working. I had to increase virtual memory to over 17500 however since adding the 6th card all 3 of this card type have dropped from 25mh to 16mh. My Aorus are still running at 28 but the msi, all running same bios are running at 16. Take 6th card out and hash umps up to 25 on the remaining 2 MSI.....

edit: For some reason MSIAfterburner had underclocked the cards when 6 were plugged in. All good now

tdguchi

newbie

Activity: 4

Merit: 0

Quote from: scryptr on July 17, 2017, 12:32:57 AM

Quote from: tdguchi on July 16, 2017, 09:21:33 PM

Hi, i have a rx 580 Nitro+ 4Gb gpu, with a power supply of 650w

if I only use ethereum mode, all its fine (24mh/s) but, when I try dual mining, after a short time, my pc reboots, could it be caused by lack of current or voltage?

I run the miner only with required parameters, epool dpool wallets, and passwords, my rx 580 is NOT modded and running at 60-64ºC

Could anyone help me with that?

Also.. which pool is the best for 1 GPU?

Thanks

NOT ENOUGH POWER--

You need a 1000W PSU for 5 to 6 GPUS. A PSU needs to have more capacity than the maximum power draw for ALL of your GPUs combined. The highest efficiency is at about 60-70 percent of the rated capacity of the PSU.

You can not get by without overloading and burning out a low-power, low efficiency PSU. 5 x 150W equals 750W, and that is greater than 650W (your PSU). A low-wattage algorithm may work for a while, but the PSU will still burn out. It could also explode or catch fire.

I no longer buy cheap, unrated PSUs. Stick with Gold, or Platinum, from a reliable manufacturer with a soiid warranty. A PSU will really explode if over-worked. --scryptr

yeah, 1000w for 5 o 6 gpu, but I only have one, that should be enough...or not?

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: Gunna01 on July 17, 2017, 06:25:31 AM

So my system is crashing when creating the dag when running 6 GPU, 5 has been solid all week. Thought it was a riser but put a new one in with the same result.

Any suggestions?

Have you tried -lidag option ?

Code:

-lidag low intensity mode for DAG generation, it can help with OC or weak PSU. Supported values are 0, 1, 2, 3, more value means lower intensity. Example: "-lidag 1".
You can also specify values for every card, for example "-lidag 1,0,3". Default value is "0" (no low intensity for DAG generation).

Also try -gser

Code:

-gser this setting can improve stability on multi-GPU systems if miner hangs during startup. It serializes GPUs initalization routines. Use "-gser 1" to serailize some of routines and "-gser 2" to serialize all routines.
Default value is "0" (no serialization, fast initialization).

Gunna01

sr. member

Activity: 306

Merit: 251

So my system is crashing when creating the dag when running 6 GPU, 5 has been solid all week. Thought it was a riser but put a new one in with the same result.

Any suggestions?

duffann

full member

Activity: 178

Merit: 102

I am currently using 378.92 with windows 7 64 bit. Claymore suggests 368.61 for this config. Do you think it will differ much and should i downgrade to that version ?

gh05t77

newbie

Activity: 6

Merit: 0

Quote from: IncludeBeer on July 16, 2017, 10:08:42 PM

Quote from: gh05t77 on July 16, 2017, 04:53:19 PM

Dear Claymore
Please, pay attention on dramatically decrease hash rate with epoch growth.
I test it on my rig with 3 RX580 4Gb (use -benchmark key) and here are results:
epoch #120 ETH: GPU0 29.380 Mh/s, GPU1 29.532 Mh/s, GPU2 29.944 Mh/s
epoch #130 ETH: GPU0 29.146 Mh/s, GPU1 29.273 Mh/s, GPU2 29.700 Mh/s
epoch #140 ETH: GPU0 27.567 Mh/s, GPU1 27.664 Mh/s, GPU2 27.992 Mh/s
epoch #160 ETH: GPU0 21.309 Mh/s, GPU1 21.397 Mh/s, GPU2 21.666 Mh/s
epoch #180 ETH: GPU0 18.493 Mh/s, GPU1 18.509 Mh/s, GPU2 18.795 Mh/s

So very shortly we got decrease hash rate on 5% (between epoch #130 and #140).
Please fix this bug or explain what to do.

That isn't a bug. As epoch goes up, hashrate of many amd gpu's goes down. It is known. Cheesy

I run benchmark on RX480 8Gb and got the same results. So it's not depend of memory size.
Does this problem have NVIDIA cards too?

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Any helps on this please ...

Quote from: papampi on July 17, 2017, 01:55:29 AM

Hi guys
I have gone crazy to setup 6 GPU, 5 works ok with no problem
When I enable the 6th one after 10-15 minutes cpu usage goes high and reach 90%. no program with high cpu in task manager but "system"
tried with MSI afterburner running to speed up fans, and without it
If I leave it like that after a while claymore gives error. or system freeze before WatchDog could restart.

Code:

NVML: Cannot get current Temp, Err 999
NVML: Cannot get current Fan Speed, Err 999

All 6 GPU are detected and working fine, tried to run with 5 and cycle the 6th one to check if problem is from risers or power cables ( Disabled pcie1 , run with 5, disabled pcie2 run with 5 .... )
All ok with 5 GPU no matter which one, as soon as I enable 6th the cpu goes high.
system is :
Windows 10, 1703 , all drivers updated to latest with "Driver Booster"
Mobo: MSI Z170A XPower Gaming Titanium Edition
PSU: Thermaltake Toughpower XT Gold 1275W
GPU: 6x 1070 Asus Dual 8OG
Ram: ADATA XPG Z1 DDR4 8GB 2800MHz CL17 Dual Channel
CPU: Pentium G4400 3.3GHz LGA 1151 Skylake CPU
HDD: SAMSUNG 750 EVO 120GB SATAIII Solid State Drive

PEG0, PEG1, PEG2 gen 1 (tried with auto too)
4G enabled
IGD disabled (tried with enable too)

Bulletdodger

sr. member

Activity: 337

Merit: 250

Yeah, I did check it out.

Just wanted to see is there a difference "in real life".

I tried mining with my 1080tis, but no success. I'm using latest win 10, latest drivers, clay 9.7 etc,
but keep getting this shit, so I gave up for now (scouted the internet with no clear solution as well).

p33k

newbie

Activity: 66

Merit: 0

I have all the cards you listed and whattomine.com is fairly accurate on hashrates.

Quote from: Bulletdodger on July 17, 2017, 03:35:39 AM

Quote from: CarlOrff on July 17, 2017, 03:22:35 AM

Quote from: Bulletdodger on July 16, 2017, 06:18:30 PM

Hey guys,

what hashrates are you getting on nvidia cards?
Single/dual mining (preferably with ETH+SIA)

1070 =?
1080 =?
1080Ti =?

Thanks a lot!

Hey,

GTX 1070 ETH+SC @ 100 Watts
Ubuntu 16.04 + Claymore 9.7
ETH : ~26 MH/s
SC : ~260 MH/s
Average since more 3 days.

The 9.7 version is a very good one, thanks again Claymore.

Your welcome

Thanks a bunch,
these are decent stats even though Sia is kinda low (you get 1500 sols when solo mining it), but ok, pretty decent.
Any info on 1080Ti?

I'm thinking about switching my nvidia cards from ZEC to Dual miner...

Bulletdodger

sr. member

Activity: 337

Merit: 250

Quote from: CarlOrff on July 17, 2017, 03:22:35 AM

Quote from: Bulletdodger on July 16, 2017, 06:18:30 PM

Hey guys,

what hashrates are you getting on nvidia cards?
Single/dual mining (preferably with ETH+SIA)

1070 =?
1080 =?
1080Ti =?

Thanks a lot!

Hey,

GTX 1070 ETH+SC @ 100 Watts
Ubuntu 16.04 + Claymore 9.7
ETH : ~26 MH/s
SC : ~260 MH/s
Average since more 3 days.

The 9.7 version is a very good one, thanks again Claymore.

Your welcome

Thanks a bunch,
these are decent stats even though Sia is kinda low (you get 1500 sols when solo mining it), but ok, pretty decent.
Any info on 1080Ti?

I'm thinking about switching my nvidia cards from ZEC to Dual miner...

aedboy

newbie

Activity: 2

Merit: 0

Quote from: papampi on July 16, 2017, 07:37:07 AM

Quote from: aedboy on July 16, 2017, 07:17:38 AM

Please help me
My rig 12 gpu galax gtx 1050ti*8 and msi rx560*4
PSU corsair vs650*2
MB biostar tb250 btc pro
Ram 8gb

I'm install gpu 8+4
It freeze Cry

but install 1050ti*8 and rx560*3 not freeze
How to solve? Cry

http://www.mx7.com/i/003/ZSDWRj.JPG

May be your PSU are not strong enough.
what about 1050ti*7 and rx560*4?

7*4 freeze
rx560*4 freeze
rx560*3 not freeze

I'm try PSU 650+650+750w Unsolvable Cry

CarlOrff

sr. member

Activity: 826

Merit: 440

Quote from: bkbirge on July 16, 2017, 10:20:31 PM

I'm running all nvidia, a mix of 1060,1070,1080 on different miners, each miner exhibits the same behavior.

Here's my batch file to start it all up...
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

You can erase this section : it is only for AMD GPUs.

CarlOrff

sr. member

Activity: 826

Merit: 440

Quote from: Bulletdodger on July 16, 2017, 06:18:30 PM

Hey guys,

what hashrates are you getting on nvidia cards?
Single/dual mining (preferably with ETH+SIA)

1070 =?
1080 =?
1080Ti =?

Thanks a lot!

Hey,

GTX 1070 ETH+SC @ 100 Watts
Ubuntu 16.04 + Claymore 9.7
ETH : ~26 MH/s
SC : ~260 MH/s
Average since more 3 days.

The 9.7 version is a very good one, thanks again Claymore.

Your welcome

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 738. (Read 6590565 times)