Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 747.

alvingans

newbie

Activity: 19

Merit: 0

Problem with Claymore's V9,7
yea it increase my gtx 1060 speed from 18.3 Mh/s to 19 Mh/s but it also reduce my RX 580 card from 29 MH/s to 28.3 Mh/s.
something is wrong?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: sweetydady on July 12, 2017, 08:12:27 AM

Hi, Claymore, any news about AMD dropping hashrate? annyyyy
thanks!

No news for now, but I expect it soon, just need to wait a bit more.

Munhenhos

member

Activity: 72

Merit: 10

Quote from: Pwndzilla on July 12, 2017, 08:24:54 AM

Quote from: Munhenhos on July 12, 2017, 08:07:35 AM

Quote from: Pwndzilla on July 12, 2017, 08:03:27 AM

Hello, I have been trying to understand how to set -ethi to one of my Gpu's. I have a GTX 1080Ti as GPU 0 and a GTX 1070 as Gpu 1. I am dual mining ETH+DCR atm. The GTX 1070 is a dedicated mining card in my gaming pc.

My question would be is it possible for 3 different .bat files for various scenarios with -ethi on GPU 0?

Scenario 1: Mining + Youtube + Various web browsing. Would like for GPU 0 to work "lighter" under these conditions.

Scenario 2 : Straight mining with both cards

Scenario 3: Gaming + mining or would it be better to just turn off GPU 0 when gaming?

I understand how to change -dcri values from inside claymore with + -.

Is it possible to have GPU 0 doing light work on ETH + DCR while GPU 1 goes all out with different dcri settings between the 2 Gpu's?

Thanks for any reply. I have used the search but can't seem to find exactly what i'm looking for.

just add -ethi 0,8 for gaming example. 8 is default. I am assuming that your 1080 is GPU 0.
Try different configs for your scenario 1, i would start with -ethi 4,8 and work around that.

Where in the .bat file do you insert the -ethi command?

add it at the end of the last line

syncis

newbie

Activity: 16

Merit: 0

Guys, dumb question.....

I got 6 x gtx 1070, 4 cards are powered with 2 pci-e Cables that have 2x8 pin each, and 2 cards are powered using single Cables with 1x8pin.
I guess my question is, is there any Power difference/problems if you connect more than 1 Graphics card with 1 single pci-e Cable?

coinzoid

sr. member

Activity: 476

Merit: 250

Quote from: IncludeBeer on July 11, 2017, 09:50:08 PM

9.7 Results:
ASUS 1080ti - 2000mhz clock / 5200 memory

Eth: 30-31.5 mh/s
Dcr: 2250-2350 mh/s

Anyone else with a 1080ti have results to share?

Is this dual mining performance using 1080 ti? If so could you please tell me your watt usage from wall per gpu?

johny13

newbie

Activity: 9

Merit: 0

With version 9.7 I gained about 0.8MHz for each nvidia 1070 or 1080 ti card I have. Thing is that after some time or maybe hours (its random I think), the hashrate drops to 9.6 driver levels or slightly higher.
For example one of my rigs with version 9.6 was doing 232Mh/s eth and 2300Mh/s Sia. With 9.7 went up to 238Mh/s eth and 3000Mh/s Sia. It drops though to 231-234Mh/s eth and 2500-2200 Sia.
I noticed some drop to version 9.6 too, after hours of mining though, like from 232Mh/s for eth to 231Mh/s.
The drop rate with version 9.7 is more obvious now. I don't know if there is any solution for this.

Anyway, great job Claymore, thank you!

woodaxe

member

Activity: 129

Merit: 10

not detecting 7th card
cannot find 7th card

windows 10
m/b gigabyte GA-Z170-GAMING-K3
celeron cpu
4 gig ram
3way pcie splitter so i can add 2 more cards

2x 800w gold psu

running 2xrx470 1 rx480 2xrx560 1xrx460 1x r9 7950

it runs fine on 6 cards i can swap cards in the splitter but will only recconise 6 cards in total
ive ddu and reinstalled drivers 17.6.2

any ideas

many thanks

Pwndzilla

newbie

Activity: 3

Merit: 0

Quote from: Munhenhos on July 12, 2017, 08:07:35 AM

Quote from: Pwndzilla on July 12, 2017, 08:03:27 AM

Hello, I have been trying to understand how to set -ethi to one of my Gpu's. I have a GTX 1080Ti as GPU 0 and a GTX 1070 as Gpu 1. I am dual mining ETH+DCR atm. The GTX 1070 is a dedicated mining card in my gaming pc.

My question would be is it possible for 3 different .bat files for various scenarios with -ethi on GPU 0?

Scenario 1: Mining + Youtube + Various web browsing. Would like for GPU 0 to work "lighter" under these conditions.

Scenario 2 : Straight mining with both cards

Scenario 3: Gaming + mining or would it be better to just turn off GPU 0 when gaming?

I understand how to change -dcri values from inside claymore with + -.

Is it possible to have GPU 0 doing light work on ETH + DCR while GPU 1 goes all out with different dcri settings between the 2 Gpu's?

Thanks for any reply. I have used the search but can't seem to find exactly what i'm looking for.

just add -ethi 0,8 for gaming example. 8 is default. I am assuming that your 1080 is GPU 0.
Try different configs for your scenario 1, i would start with -ethi 4,8 and work around that.

Where in the .bat file do you insert the -ethi command?

JustCauseBIH

member

Activity: 91

Merit: 10

Hi there,

how to undervolt using watttool? I have RX 570 asus expedition 4GB OC. Can anyone help me what settings to use for undevolting?

Im not quite sure what to change and how to test it by best way.

Coin++

sr. member

Activity: 810

Merit: 444

Quote from: sweetydady on July 12, 2017, 08:12:27 AM

Hi, Claymore, any news about AMD dropping hashrate? annyyyy
thanks!

AMD dropping hashrate is not a question of miner but a question of manufacturer.

sweetydady

newbie

Activity: 44

Merit: 0

Hi, Claymore, any news about AMD dropping hashrate? annyyyy
thanks!

Munhenhos

member

Activity: 72

Merit: 10

Quote from: Pwndzilla on July 12, 2017, 08:03:27 AM

Hello, I have been trying to understand how to set -ethi to one of my Gpu's. I have a GTX 1080Ti as GPU 0 and a GTX 1070 as Gpu 1. I am dual mining ETH+DCR atm. The GTX 1070 is a dedicated mining card in my gaming pc.

My question would be is it possible for 3 different .bat files for various scenarios with -ethi on GPU 0?

Scenario 1: Mining + Youtube + Various web browsing. Would like for GPU 0 to work "lighter" under these conditions.

Scenario 2 : Straight mining with both cards

Scenario 3: Gaming + mining or would it be better to just turn off GPU 0 when gaming?

I understand how to change -dcri values from inside claymore with + -.

Is it possible to have GPU 0 doing light work on ETH + DCR while GPU 1 goes all out with different dcri settings between the 2 Gpu's?

Thanks for any reply. I have used the search but can't seem to find exactly what i'm looking for.

just add -ethi 0,8 for gaming example. 8 is default. I am assuming that your 1080 is GPU 0.
Try different configs for your scenario 1, i would start with -ethi 4,8 and work around that.

Pwndzilla

newbie

Activity: 3

Merit: 0

Hello, I have been trying to understand how to set -ethi to one of my Gpu's. I have a GTX 1080Ti as GPU 0 and a GTX 1070 as Gpu 1. I am dual mining ETH+DCR atm. The GTX 1070 is a dedicated mining card in my gaming pc.

My question would be is it possible for 3 different .bat files for various scenarios with -ethi on GPU 0?

Scenario 1: Mining + Youtube + Various web browsing. Would like for GPU 0 to work "lighter" under these conditions.

Scenario 2 : Straight mining with both cards

Scenario 3: Gaming + mining or would it be better to just turn off GPU 0 when gaming?

I understand how to change -dcri values from inside claymore with + -.

Is it possible to have GPU 0 doing light work on ETH + DCR while GPU 1 goes all out with different dcri settings between the 2 Gpu's?

Thanks for any reply. I have used the search but can't seem to find exactly what i'm looking for.

muratizm

member

Activity: 84

Merit: 10

Quote from: Harry5555 on July 12, 2017, 06:45:43 AM

Quote from: TechPark on July 11, 2017, 10:07:34 PM

Quote from: Harry5555 on July 11, 2017, 08:20:25 PM

Quote from: Aquazi on July 11, 2017, 05:36:38 PM

Anybody got an increase in hashrate with 17.7.1 crimson drivers?

Looking especially at 470/570, 480/580 users. Please specify what memory do you have.

Not for me, I got a ASUS 480 STRIX 8GB (samsung memory), memory clock default 2000 mhz, coreclock underclocked to 1211 mhz.

I think Claymore need to do more optimization, as the driver update did not bring any improvement on my end.

I can also add that I mine in ethereum only mode.

Best regards
Harry.

What driver do you use and what are your settings and speed?

driver version is 17.7.1 which came out yesterday, made a clean install. My speed is roughly 23.9 Mh/s. Stock bios, Memory clock 2000 Mhz, Coreclock downlocked from 1310 to 1211 Mhz, (I got Samsung memory).

I can also tell that I am using the latest claymore miner 9.7,

OS: Windows 10 creators update.

These settings? If so here they are. (from start.bat)

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xF7DE67DEF97Cace74150eD6ddF7D31F2f81c61Fa.480 -epsw ---

Best regards
Harry

you need bios mod and copy 1750 mhz timings to 2000 mhz box in bios editor, flash, and patch with amd mdiag patcher.
driver update won't bring any performance enhancements.

muratizm

member

Activity: 84

Merit: 10

Quote from: kobazik on July 12, 2017, 03:45:16 AM

I have GPU4 watchdog error happening every 6 hours even on factory bios on my Sapphire RX470 OC 8GB (Micron)

How to lower ethereum mining intensity on GPU4 only?

add this to bat file after .exe file (after or before -epool -ewal whatever)
-ethi 8,8,8,8,6,8,8,8,8,8
gpu4 is 5th gpu so value 5 is 6, you can make it anything lower than 8 (default) until it is stable. or keep it cold and decrease mem overclock. or put some dummy dvi adapters in gpu0

Harry5555

member

Activity: 81

Merit: 10

Quote from: rippo on July 12, 2017, 01:50:25 AM

Hello,

Can I use Claymore 9.7 to mine only ZEC? If not, could you please point me in the right direction? What software to use..

Thanks.

If you want to mine Zcash you can use claymores Zcash miner

Here is the link to it -> https://bitcointalksearch.org/topic/claymores-zcashbtg-amd-gpu-miner-v126-windowslinux-1670733

Harry5555

member

Activity: 81

Merit: 10

Quote from: TechPark on July 11, 2017, 10:07:34 PM

Quote from: Harry5555 on July 11, 2017, 08:20:25 PM

Quote from: Aquazi on July 11, 2017, 05:36:38 PM

Anybody got an increase in hashrate with 17.7.1 crimson drivers?

Looking especially at 470/570, 480/580 users. Please specify what memory do you have.

Not for me, I got a ASUS 480 STRIX 8GB (samsung memory), memory clock default 2000 mhz, coreclock underclocked to 1211 mhz.

I think Claymore need to do more optimization, as the driver update did not bring any improvement on my end.

I can also add that I mine in ethereum only mode.

Best regards
Harry.

What driver do you use and what are your settings and speed?

driver version is 17.7.1 which came out yesterday, made a clean install. My speed is roughly 23.9 Mh/s. Stock bios, Memory clock 2000 Mhz, Coreclock downlocked from 1310 to 1211 Mhz, (I got Samsung memory).

I can also tell that I am using the latest claymore miner 9.7,

OS: Windows 10 creators update.

These settings? If so here they are. (from start.bat)

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xF7DE67DEF97Cace74150eD6ddF7D31F2f81c61Fa.480 -epsw ---

Best regards
Harry

pencas

newbie

Activity: 10

Merit: 0

Quote from: Etherion on July 12, 2017, 03:14:11 AM

@Claymore are you going to update the miner to support +13 cards? https://www.youtube.com/watch?v=B6gB7GYkkiA

what is the maximum right now with amd only cards on windows? 8?

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

TLS email notificantions do not seem to be working in this version using the Gmail smtp servers ..

pr0ximus

full member

Activity: 142

Merit: 100

Quote from: NoOneLt on July 12, 2017, 04:25:50 AM

Hey Claymore, some possible suggestions:

1. In monitor each miner could have own Altcoin settings, one miner mine SC other DCR, etc, maybe it is even possible to get this info from miner itself, as we use config to set altcoin..

2. Devfee would be more efficient if you could detect best server, mine miners use EU servers, and i saw that devfee mine on US with 2-3 times higher ping. Though it is the same pool...

3. Could you try to avoid DAG recreation each devfee? Maybe if you can detect that you can use same pools as miner is using currently for your fees you could just switch Workers/wallets. Would be much faster

Thanks for your work.

Those are some really good suggestions. Hope he considers it.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 747. (Read 6590565 times)