Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 750.

TechPark

full member

Activity: 238

Merit: 100

Difficulty raised 10% in one day https://etherscan.io/chart/difficulty Is this the result of Claymore's miners update to version 9.7?

shadowhlohavec

full member

Activity: 207

Merit: 100

NoizChain

I'm using 4x gtx 1060, the 9.7 version is unstable btw
mining with 9.6 sometimes getting this error - http://imgur.com/a/tz6YW
anyone? thanks

parentibule

full member

Activity: 406

Merit: 100

Hi,

When starting claymore, it said that 368.81 drivers are best for perf and compatibility. With them, I have 2 (yes TWO) MH/s on ETH with a 1060 6GB ! With last drivers (384.76), I have 19 MH/s (without OC). So, what the problem with 368.81, supposed to be better?

Thanks.

TechPark

full member

Activity: 238

Merit: 100

Quote from: Danielcech on July 11, 2017, 05:09:22 AM

Hi guys, I'm looking for some help, please. Claymore 9.5 runs fine but I cannot get 9.6 or 9.7 going. In 9.7 I get : "ETH: Stratum - Cannot connect to eth-eu1.nanopool.org:9999. Failed to connect." I have Win 10, 1x ASUS ROG STRIX GAMING GeForce GTX 1080 Advanced Edition, newest driver 384.76. Claymore 9.5 runs fine with my .bat file :

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal walletNR/Name/Email -epsw x -mode 1 -ftime 10

Any thoughts?

Thanks

Daniel

Have you tried to run it with the driver actually recommended by Claymore? refer to the first page.

TechPark

full member

Activity: 238

Merit: 100

Quote from: syncis on July 11, 2017, 02:09:38 AM

Quote from: TechPark on July 10, 2017, 06:43:12 PM

1200W is definitely enough, it can easily take 1300W out of the wall.
I would suggest you to double check the basics:
- reset BIOS to default
- set PCI-E to Gen2 and disable built in video adapter
- do not use Molex on MB if you have powered risers
- setup default BIOS and settings on all cards.
- install all the latest updates for Windows (run>winver>must be 1703)
- uninstall with DDU and reinstall the drivers for Nvidia recommended by Claymore ("10xx cards in Windows 10 x64: just use latest 372.54 drivers from Nvidia website, note that you must have Win10 Anniversary update")
- setup RAM >4GB
- setup virtual memory > 16GB
- setup exclusions for AntiVirus software
- make sure that you have no more than 2 card per SATA PSU cable
- use only essential commands in config/bat file
- avoid using temperature or overclocking settings keys inside config/bat file
- run 1 card only
- use MSI AB to setup up minimal settings - decrease Core clock and memory clock
- if stable add a second card
- reinstall the driver
- setup up minimal settings - decrease Core clock and memory clock
- add more cards one by one
- if running stable on minimal settings increase each parameter one by one
- if stable you may try to overclock it
- use GPU-Z and HW info to monitor the hardware

Post screenshots here. We might notice something odd.

I will try this and get back to you, but this is now weird.

Havent changed anything but some oc in afterburner, 75% Power, 85 temp, -400 core, +400 mem and its been running for 16 hours.
Tried this as well yesterday with a Little modifications and its jsut crashed after a while.

Checking in afterburner, it usually crash when the % Power make a down spike or drop, does anyone know why this happens? Do I need to add more voltage or Power to remove the spikes? Because i guess thats what causes the instability.
Also, spikes usually happens when i get a new job in claymore, maybe it should be like that.

Uploaded image of it, usually its the last gpu that fails. http://imgur.com/a/fJTTt

Edit : In my Control panel, Power management is set to optimal Power by default, is it best to have that or maximum performance?

This spikes are down spikes not up spikes.
When the core is not doing much work there it does not take much power you see it as down spike.
If you suspect the power then follow my advices above related to power. leave other tasks for later.

Munhenhos

member

Activity: 72

Merit: 10

Quote from: Danielcech on July 11, 2017, 05:09:22 AM

Hi guys, I'm looking for some help, please. Claymore 9.5 runs fine but I cannot get 9.6 or 9.7 going. In 9.7 I get : "ETH: Stratum - Cannot connect to eth-eu1.nanopool.org:9999. Failed to connect." I have Win 10, 1x ASUS ROG STRIX GAMING GeForce GTX 1080 Advanced Edition, newest driver 384.76. Claymore 9.5 runs fine with my .bat file :

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal walletNR/Name/Email -epsw x -mode 1 -ftime 10

Any thoughts?

Thanks

Daniel

Add you wallet adress to your bat file.

Gagana

member

Activity: 80

Merit: 10

Claymore 9.7 + Pangolin miner (8x1060*6Gb)

Windows 2012(preinstalled!)

ETH+DCR
180Mh+1630Mh
-dcri 27

930W power consumption

Danielcech

newbie

Activity: 2

Merit: 0

Hi guys, I'm looking for some help, please. Claymore 9.5 runs fine but I cannot get 9.6 or 9.7 going. In 9.7 I get : "ETH: Stratum - Cannot connect to eth-eu1.nanopool.org:9999. Failed to connect." I have Win 10, 1x ASUS ROG STRIX GAMING GeForce GTX 1080 Advanced Edition, newest driver 384.76. Claymore 9.5 runs fine with my .bat file :

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal walletNR/Name/Email -epsw x -mode 1 -ftime 10

Any thoughts?

Thanks

Daniel

freak1

newbie

Activity: 47

Merit: 0

After upgrading to 9.7 miners stops reporting hashrate to the pool at random, anyone else seeing this?

achechet

newbie

Activity: 3

Merit: 0

Could somebody tell me what is wrong?
I try start Claymore on supernova.cc but receive an error:
ETH: Stratum - Connected (eth.suprnova.cc:5005)
DCR: Stratum - connecting to 'dcr.suprnova.cc' <217.182.138.167> port 3252
DCR: Stratum - Connected (dcr.suprnova.cc:3252)
DCR: Authorized

Code:

Received unknown response: {"jsonrpc":"2.0","result":["0x5e3851de49fd14fd80ee699c5796601c337dc474fc1ed8d62a5310ede84b66cd","0x9e9724706b96cf93985fa8f097f4c1a687ebc3c5fc93d50a68d8e51211a723e0","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
Received unknown response: {"jsonrpc":"2.0","result":["0x5e3851de49fd14fd80ee699c5796601c337dc474fc1ed8d62a5310ede84b66cd","0x9e9724706b96cf93985fa8f097f4c1a687ebc3c5fc93d50a68d8e51211a723e0","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

h311m4n

sr. member

Activity: 487

Merit: 266

So can anyone share their speed on a 560?

syncis

newbie

Activity: 16

Merit: 0

Quote from: TechPark on July 10, 2017, 06:43:12 PM

1200W is definitely enough, it can easily take 1300W out of the wall.
I would suggest you to double check the basics:
- reset BIOS to default
- set PCI-E to Gen2 and disable built in video adapter
- do not use Molex on MB if you have powered risers
- setup default BIOS and settings on all cards.
- install all the latest updates for Windows (run>winver>must be 1703)
- uninstall with DDU and reinstall the drivers for Nvidia recommended by Claymore ("10xx cards in Windows 10 x64: just use latest 372.54 drivers from Nvidia website, note that you must have Win10 Anniversary update")
- setup RAM >4GB
- setup virtual memory > 16GB
- setup exclusions for AntiVirus software
- make sure that you have no more than 2 card per SATA PSU cable
- use only essential commands in config/bat file
- avoid using temperature or overclocking settings keys inside config/bat file
- run 1 card only
- use MSI AB to setup up minimal settings - decrease Core clock and memory clock
- if stable add a second card
- reinstall the driver
- setup up minimal settings - decrease Core clock and memory clock
- add more cards one by one
- if running stable on minimal settings increase each parameter one by one
- if stable you may try to overclock it
- use GPU-Z and HW info to monitor the hardware

Post screenshots here. We might notice something odd.

I will try this and get back to you, but this is now weird.

Havent changed anything but some oc in afterburner, 75% Power, 85 temp, -400 core, +400 mem and its been running for 16 hours.
Tried this as well yesterday with a Little modifications and its jsut crashed after a while.

Checking in afterburner, it usually crash when the % Power make a down spike or drop, does anyone know why this happens? Do I need to add more voltage or Power to remove the spikes? Because i guess thats what causes the instability.
Also, spikes usually happens when i get a new job in claymore, maybe it should be like that.

Uploaded image of it, usually its the last gpu that fails. http://imgur.com/a/fJTTt

Edit : In my Control panel, Power management is set to optimal Power by default, is it best to have that or maximum performance?

deadsix

hero member

Activity: 751

Merit: 517

Fail to plan, and you plan to fail.

Quote from: IncludeBeer on July 11, 2017, 01:20:32 AM

Hey guys, my Eth rig recently went down and tonight I went about troubleshooting. For some reason, it was refusing to power on. Unplugged it all and went for 1x gpu. Powered on booted into Windows fine. Tried 2, works fine.

Now this is where it gets weird. As soon as I plug in another pcie cable to my power supply, the rig refuses to power on. Not just not booting into windows; completely no power. If I plug the powered riser into a 3rd gpu: no power on. A couple times while I was trying different things, it wouldn't even power on for the 2 gpus which worked a minute before. Then (seemingly randomly), it will work again for only 2x gpu.

What I've checked/done: checked all power cables/plugs on mb. Swapped power supplies with a new one.

Any ideas where I should start troubleshooting? I really thought it was my PS, but I can't believe I'd have 2 go out on me. Maybe my MB is going bad?

Rig:
Asrock H81 Pro Btc
evga 1k PSU
5x Sapphire Nitro+ 480x
shitty cpu and 4gb RAM

Happened to my rig. PSU turned out to be the problem. Change it and check, if you have a spare.

IncludeBeer

legendary

Activity: 1164

Merit: 1010

Hey guys, my Eth rig recently went down and tonight I went about troubleshooting. For some reason, it was refusing to power on. Unplugged it all and went for 1x gpu. Powered on booted into Windows fine. Tried 2, works fine.

Now this is where it gets weird. As soon as I plug in another pcie cable to my power supply, the rig refuses to power on. Not just not booting into windows; completely no power. If I plug the powered riser into a 3rd gpu: no power on. A couple times while I was trying different things, it wouldn't even power on for the 2 gpus which worked a minute before. Then (seemingly randomly), it will work again for only 2x gpu.

What I've checked/done: checked all power cables/plugs on mb. Swapped power supplies with a new one.

Any ideas where I should start troubleshooting? I really thought it was my PS, but I can't believe I'd have 2 go out on me. Maybe my MB is going bad?

Rig:
Asrock H81 Pro Btc
evga 1k PSU
5x Sapphire Nitro+ 480x
shitty cpu and 4gb RAM

notbatman

legendary

Activity: 2212

Merit: 1038

Quote from: Tmdz on July 10, 2017, 10:47:17 PM

Quote from: Darwin84 on July 10, 2017, 08:37:35 PM

Does anyone know what the best version is for 7950 and 7970 cards? Linux

Mine Zcash.

Mining ether on those cards is useless now.

They're only useless for ETH and ETC, those cads will still get 25MH/s on EXP, UBQ, MUSIC, DBIX, et al...

I get 54MH/s on my reference HD 7990 BTW.

jawnawtin

newbie

Activity: 1

Merit: 0

Can you mine with mix gpus in one rig? ex: msi gtx 1060 with msi radeon rx 580?

haga1983

newbie

Activity: 1

Merit: 0

HI ALL,
I am using Claymore ETH solo. But now my claymore is faulty just showing the GPU0's temperature and fan. Other GPUs not showing (purple)
Can anyone help me this problem Sad

http://imgur.com/apPUw0M

Tmdz

hero member

Activity: 1008

Merit: 1000

Quote from: Darwin84 on July 10, 2017, 08:37:35 PM

Does anyone know what the best version is for 7950 and 7970 cards? Linux

Mine Zcash.

Mining ether on those cards is useless now.

coiner17

newbie

Activity: 39

Merit: 0

Currently using Claymores miner for single mining Dubaicoin - DBIX.

Here is my config file:
====================================================================================================
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!

-epool dbix.pool.sexy:7007
-ewal 0x8c4dDFbA36B0d41a2a3eA365A5AD11aE21192736
-epsw x
#-dpool stratum+tcp://yiimp.ccminer.org:4252
#-dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4
#-dpsw x
-esm 0
-mode 1
-allcoins 1
-allpools 1
-tt 83
====================================================================================================

No issues so far, thanks Claymore.

Darwin84

full member

Activity: 196

Merit: 100

Does anyone know what the best version is for 7950 and 7970 cards? Linux

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 750. (Read 6590718 times)