Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 89. (Read 6590757 times)
September 04, 2019, 07:46:39 PM
Currently it works at ethermine pool (default start.bat file included in the miner) but I have not been able to get it working on miningpoolhub, is anyone else using that pool? Using a 5700XT, stock settings, today's new drivers.
September 04, 2019, 07:28:00 PM
I would expect the Non XT to run at around 48MHs (36 CU vs 40 CU), don't know much about power usage in that case.
Nah I’m running plain 5700...extra cores don’t do anything for eth, and it will matter even less when miners are running wave32 code.
September 04, 2019, 06:00:08 PM
I would expect the Non XT to run at around 48MHs (36 CU vs 40 CU), don't know much about power usage in that case.
September 04, 2019, 05:55:07 PM
NAVI NOW WORKS NEW DRIVER AMD 19.9.1 i get 51mh/s on eth i dont know how to add a pic
Which card? 5700 or XT?
What are your OC settings?
How many watts is it using?
54 MH with max clocked Memory...running 105 watts at the wall with underclock/uv...this can easily be pushed to over 60MH with timing changes and under 100 watts.
Pretty killer card for ETH...guess AMD needed more sales so opened up the driver to miners
I'm guessing you're using XT variant as well?
I'm just looking to see for sure if the XT is worth the extra $50 before I invest in 12 of them.
September 04, 2019, 05:43:10 PM
Can confirm, I am running Sapphire Pulse RX 5700 XTs at 53.89MH each pulling 103 Watts at wall. Memory at 950, core at 1300, core voltage 700.
Temps not reaching above 45 Celsius and fan speed at 1073RPM.
Cheers
Temps not reaching above 45 Celsius and fan speed at 1073RPM.
Cheers
September 04, 2019, 05:31:05 PM
NAVI NOW WORKS NEW DRIVER AMD 19.9.1 i get 51mh/s on eth i dont know how to add a pic
Which card? 5700 or XT?
What are your OC settings?
How many watts is it using?
54 MH with max clocked Memory...running 105 watts at the wall with underclock/uv...this can easily be pushed to over 60MH with timing changes and under 100 watts.
Pretty killer card for ETH...guess AMD needed more sales so opened up the driver to miners
September 04, 2019, 05:02:52 PM
NAVI NOW WORKS NEW DRIVER AMD 19.9.1 i get 51mh/s on eth i dont know how to add a pic
Which card? 5700 or XT?
What are your OC settings?
How many watts is it using?
September 04, 2019, 03:34:33 PM
hi,
could you give more details,
with 5700 or XT?
settings?
power use?
tx
could you give more details,
with 5700 or XT?
settings?
power use?
tx
September 04, 2019, 03:10:52 PM
NAVI NOW WORKS NEW DRIVER AMD 19.9.1 i get 51mh/s on eth i dont know how to add a pic
September 04, 2019, 10:03:36 AM
HI, Is there a possibility to add CPU coin CPUchain to Claymore dualmining with ETH?
https://bitcointalksearch.org/topic/ann-cpuchain-core-cpufinex-cpu-mining-giga-block-no-premine-5161183
BR
G.
https://bitcointalksearch.org/topic/ann-cpuchain-core-cpufinex-cpu-mining-giga-block-no-premine-5161183
BR
G.
if its a cpu-minable coin only, how do you expect to be mined with Claymore's gpu miner?
Just run your cpu miner alongside your Clay miner and mine it with your cpu
September 04, 2019, 08:30:30 AM
HI, Is there a possibility to add CPU coin CPUchain to Claymore dualmining with ETH?
https://bitcointalksearch.org/topic/ann-cpuchain-core-cpufinex-cpu-mining-giga-block-no-premine-5161183
BR
G.
https://bitcointalksearch.org/topic/ann-cpuchain-core-cpufinex-cpu-mining-giga-block-no-premine-5161183
BR
G.
September 02, 2019, 11:43:18 PM
Well,then I should write config above in start.bat script?
I have configured 4 p106 mining gpu with MS aftr and I believe I pulled out max of then,but for gtx1660 apparently not
I have configured 4 p106 mining gpu with MS aftr and I believe I pulled out max of then,but for gtx1660 apparently not
September 02, 2019, 05:17:21 PM
dejvid98, no, I hate MSI AB 
it's Claymore's config
remember that Claymore will not affect this setting if AB is installed (even if not run)
it's Claymore's configremember that Claymore will not affect this setting if AB is installed (even if not run)
September 02, 2019, 03:41:37 PM
Did you set that in BIOS?
Because Msi afterburner did not offer setting power limit below 50
Because Msi afterburner did not offer setting power limit below 50
September 02, 2019, 02:22:17 PM
Does anyone use gtx1660?
How much mhs you can get?
26.5How much mhs you can get?
-mclock +670 -powlim -35 -strap 1 (notice: powlim is negative)
September 02, 2019, 06:36:15 AM
Thanks I wil try it .
I got one more question,
Does anyone use gtx1660?
How much mhs you can get?
I cannot get more than 21.8 and settings are
memory clock : 955 MhZ
core clock : -502
power limit : 70
Even if I increase power limit it does not change.
I got one more question,
Does anyone use gtx1660?
How much mhs you can get?
I cannot get more than 21.8 and settings are
memory clock : 955 MhZ
core clock : -502
power limit : 70
Even if I increase power limit it does not change.
September 01, 2019, 11:23:41 AM
Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing 0 mhs, anyone with same issue?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing 0 mhs, anyone with same issue?
When I first started using Claymore years ago, I had the same issue as you. Basically it connected to the right pool but after 5, 15,30, 60 minutes of checking my pools stats it showed 0 MH/s and no shares submitted.
The issue was that you need to manually change the epool.txt file with your info. Because by default it mines to Claymore's account. It was confusing because it was my pool but apparently the default Claymore pool was also the same one as mine. Eventually after 60 minutes of mining for Claymore it worked on my ETH address.
Most likely this is your issue.
Well,all comments considered,the thing I should do is paste into epool.txt : C:\Users\admin\\Downloads\Claymore12\Claymore12\EthDcrMiner64.exe -epool eu1-ethermine.org:4444
-ewall : address
-epsw x - strap1
Before that I added -driver install and then reboot pc and then deleted from script and then it looks like above.
Now I run the script and mining start but at the begining there is message driver is not installed and with the red letters written message try start the miner with command -driver uninstall and there is 0 mhs at nanopool as I stated before
If someone have further instructions what could be issue I would be greatful
open a command window in Administrator mode, change to the miner's directory, then execute "EthDcrMiner64 -driver install" from the command prompt. Or "uninstall" if you're removing. Once the driver is installed, you don't have to run in Administrator mode going forward.
September 01, 2019, 09:05:10 AM
Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing 0 mhs, anyone with same issue?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing 0 mhs, anyone with same issue?
When I first started using Claymore years ago, I had the same issue as you. Basically it connected to the right pool but after 5, 15,30, 60 minutes of checking my pools stats it showed 0 MH/s and no shares submitted.
The issue was that you need to manually change the epool.txt file with your info. Because by default it mines to Claymore's account. It was confusing because it was my pool but apparently the default Claymore pool was also the same one as mine. Eventually after 60 minutes of mining for Claymore it worked on my ETH address.
Most likely this is your issue.
Well,all comments considered,the thing I should do is paste into epool.txt : C:\Users\admin\\Downloads\Claymore12\Claymore12\EthDcrMiner64.exe -epool eu1-ethermine.org:4444
-ewall : address
-epsw x - strap1
Before that I added -driver install and then reboot pc and then deleted from script and then it looks like above.
Now I run the script and mining start but at the begining there is message driver is not installed and with the red letters written message try start the miner with command -driver uninstall and there is 0 mhs at nanopool as I stated before
If someone have further instructions what could be issue I would be greatful
September 01, 2019, 07:57:17 AM
there are many websites saying it's official, in fact they have epools.txt with lines filled. this one, for example: claymore-dual.github.io
September 01, 2019, 04:46:15 AM
Does anyone use claymore 15.0?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing 0 mhs, anyone with same issue?
I got problem with setting up obviously,
Bat script is running properly and it is showing increase in mhs but when I want to monitor through nanopool web site it is showing 0 mhs, anyone with same issue?
When I first started using Claymore years ago, I had the same issue as you. Basically it connected to the right pool but after 5, 15,30, 60 minutes of checking my pools stats it showed 0 MH/s and no shares submitted.
The issue was that you need to manually change the epool.txt file with your info. Because by default it mines to Claymore's account. It was confusing because it was my pool but apparently the default Claymore pool was also the same one as mine. Eventually after 60 minutes of mining for Claymore it worked on my ETH address.
Most likely this is your issue.
Incorrect, default epools.txt does not contain any pools, all lines are disabled with "#".
Jump to: