Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 92.

BilliGG

newbie

Activity: 13

Merit: 0

What to do with 350 rx 580 4gb once the dag hits 4gb this december?

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Claymore on August 26, 2019, 08:01:01 AM

v15.0:

- now miner supports up to #384 epoch (4GB DAG size). Note that previous versions support up to #299 epoch, you will not be able to use old versions after #299 epoch.
- added support for Navi cards (ETH-only mode).
- now miner sets environment variables automatically (required for 4GB AMD cards).
- a few minor bug fixes and improvements.

PS. AMD still has no public Navi drivers with DAG-fix, so currently 5700XT shows a very bad hashrate. But AMD already solved this issue and they promise to release public drivers soon...

Thank you for the release.

Unfortunately issue with non-Latin characters (Chinese in this case) named directories still exist.

We've noticed that on msOS during the auto-tune (dcri), no hashrate report is displayed in the console. Is it related to auto environment variables?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v15.0:

- now miner supports up to #384 epoch (4GB DAG size). Note that previous versions support up to #299 epoch, you will not be able to use old versions after #299 epoch.
- added support for Navi cards (ETH-only mode).
- now miner sets environment variables automatically (required for 4GB AMD cards).
- a few minor bug fixes and improvements.

PS. AMD still has no public Navi drivers with DAG-fix, so currently 5700XT shows a very bad hashrate. But AMD already solved this issue and they promise to release public drivers soon...

black1ight

jr. member

Activity: 44

Merit: 1

Seen the same error a few times, i feel the miner just gives up. . :-) and quits.

manolais

newbie

Activity: 3

Merit: 0

Hi, I want to know if the miner closes because someone closes it manually or this happens because of an error.

I attach the last lines of the history

Thank you

Code:

19:14:14:502 1414 ETH: 08/25/19-19:14:14 - New job from us2.ethermine.org:5555
19:14:14:503 1414 target: 0x0000000112e0be82 (diff: 4000MH), epoch 280(3.19GB)
19:14:14:504 1414 gpu #0 dt 3.14 (1%, good)
19:14:14:505 1414 ETH - Total Speed: 29.545 Mh/s, Total Shares: 264, Rejected: 0, Time: 10:45
19:14:14:506 1414 ETH: GPU0 29.545 Mh/s
19:14:17:816 1414 ETH: checking pool connection...
19:14:17:817 1414 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:14:17:891 1414 buf: {"id":0,"jsonrpc":"2.0","result":["0x66bff7ea37f55ac157796c82f82a399480c48f2c929af84af08e64a0de6b7634","0x45113dd8b32c6ad80229b2576547098555fe464645dca3ad9bd2f9517fc968dd","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x8083af"]}

19:14:18:574 1414 buf: {"id":0,"jsonrpc":"2.0","result":["0x8dc51791641afe29b6db4f2e12a7379107d2a79c259c98b087a996d0d7976e88","0x45113dd8b32c6ad80229b2576547098555fe464645dca3ad9bd2f9517fc968dd","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x8083af"]}

19:14:18:575 1414 ETH: 08/25/19-19:14:18 - New job from us2.ethermine.org:5555
19:14:18:576 1414 target: 0x0000000112e0be82 (diff: 4000MH), epoch 280(3.19GB)
19:14:18:577 1414 ETH - Total Speed: 29.549 Mh/s, Total Shares: 264, Rejected: 0, Time: 10:45
19:14:18:578 1414 ETH: GPU0 29.549 Mh/s
19:14:22:202 af8 Quit, please wait...

WhackOBill

jr. member

Activity: 73

Merit: 3

Using 14.7, I noticed that on my system if I don't strap a card, the rxboost command doesn't take effect for that card either.

For example, -strap 1,1 -rxboost 30,20 works fine and applies the new refresh timing to both cards.

Bit if I use, -strap 0,1 -rxboost 30,20 the strap is skipped, but so is the rxboost for card 0.

I never see -rxboost applied on card 0 on screen or in the log. I think it's just a command line processing error.

abg00

jr. member

Activity: 288

Merit: 1

Quote from: nn47nn on August 23, 2019, 03:31:35 PM

Quote from: abg00 on August 23, 2019, 11:51:06 AM

trouble already fixed in 747 beta. check claymore messages

In Windows systems it is possible, but not in Linux.

use phoenix and wait

nn47nn

newbie

Activity: 19

Merit: 0

Quote from: abg00 on August 23, 2019, 11:51:06 AM

trouble already fixed in 747 beta. check claymore messages

In Windows systems it is possible, but not in Linux.

NefariousFool

jr. member

Activity: 36

Merit: 7

Quote from: big_daddy on August 22, 2019, 02:28:59 AM

are You mostly using the AMD driver version 19.4.3 (where Claymore has performed most of his tests) or the newer driver versions are stable too and maybe even get better mining results?

On Windows I am running latest drivers and Windows patches.

abg00

jr. member

Activity: 288

Merit: 1

Quote from: nn47nn on August 23, 2019, 11:14:10 AM

Quote from: Fyde on August 23, 2019, 02:05:15 AM

Anyone else getting this on 4GB cards?

Code:

GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

The DAG is 3.2GB right now, I'm on Linux, everything was working fine yesterday.

Old problem of generating a dag file some random rigs, claymore does not know how to solve it

trouble already fixed in 747 beta. check claymore messages

nn47nn

newbie

Activity: 19

Merit: 0

Quote from: Fyde on August 23, 2019, 02:05:15 AM

Anyone else getting this on 4GB cards?

Code:

GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

The DAG is 3.2GB right now, I'm on Linux, everything was working fine yesterday.

Old problem of generating a dag file some random rigs, claymore does not know how to solve it

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: cirlama on August 23, 2019, 12:51:36 AM

Hi all,
were to take the latest atikmdag-patcher? the version I have doesn't work for the latest driver version...
and a fast search send me to atikmdag-patcher files that may be "strange"...

I remember that there was a topic on bitcointalk, but there were some scam links containing malware/virus under the .exe file, and the whole topic is deleted now...

Fyde

newbie

Activity: 1

Merit: 0

Anyone else getting this on 4GB cards?

Code:

GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

The DAG is 3.2GB right now, I'm on Linux, everything was working fine yesterday.

cirlama

jr. member

Activity: 156

Merit: 1

Hi all,
were to take the latest atikmdag-patcher? the version I have doesn't work for the latest driver version...
and a fast search send me to atikmdag-patcher files that may be "strange"...

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

are You mostly using the AMD driver version 19.4.3 (where Claymore has performed most of his tests) or the newer driver versions are stable too and maybe even get better mining results?

NefariousFool

jr. member

Activity: 36

Merit: 7

Quote from: Wcryan on August 21, 2019, 01:37:55 AM

Quote from: RAKOT on August 21, 2019, 01:07:54 AM

Quote from: Wcryan on August 21, 2019, 12:50:38 AM

Hi I’ve been browsing these threads for a little before I posted but it is a lot to sift through. Having trouble with 14.7. Using AMD 19.4.3 all in compute mode. Whenever I put -strap 1 in start bat I get “driver is in use, try -driver uninstall”. I added driver uninstall but need to do it in administrator. I start in administrator but ethminer start.bat opens for like a split second and then closes. I’ve tried different drivers, added folder pathway to start.bat. I’m at a loss right now. If anyone knows PM me or post. I will pay PayPal also to the person who helps me solve this

Hi!

You should run command prompt( Administrator) - its if you are in W10. Then navigate to folder there miner is. run EthDcrMiner64.exe -driver uninstall. Then reboot
Next - also run command promt (Administrator) - navigate to miner folder and run start bat wih straps option. Thats it.

Next time you can run start.bat not with admin rights, cause drivers allready been installed.

Does it matter if my cards have already been bios modded? Looking to override those with claymore

If you go to page 1344 you'll see my breakdown of what to do with the Cards.

My suggestion is the following:
1. Make a shortcut on your desktop to your start.bat file
2. Right click on that shortcut and go to properties
3. Select Advanced
4. Place a check mark in "run as administrator"
5. When you launch for the first time click on "select what to do when seeing this notification"
6. Move the slider down to the bottom.

By doing this:
1. You just have to double click it to launch your miner with no more warning or extra clicks moving forward.
2. You can right click on the shortcut and hit edit to edit your batch file w/out having to navigate to it constantly.
3. You can right click on the shortcut and "open file location" and it'll bring you right to your mining software location.

This should help you navigate and make things a little easier to execute and edit your miner in Windows 10.

NefariousFool

jr. member

Activity: 36

Merit: 7

Quote from: Binary100100 on August 21, 2019, 06:24:58 PM

Quote from: karim_hassan777 on August 21, 2019, 02:48:00 PM

Does any one know AMD team will resolve the Dag file problem for RX 5700 XT or not ?

+1
I've been logging on daily to see if there has been some update to this. Radeon VII cards are becoming scarce and I just started a 4800w 12 GPU mining rig that needs some cards! But what to use?

Not yet. Sadly.

As for what to use.... Keep getting those Radeon Vii's as long as you can!!!

after that its a huge cliff to the Rx 500 series and AMD has been unable to resolve the Dag issue with the 5700.

The pressure is mounting though, now that the AIB cards are now in the wild, they need to fix that driver ASAP.

Binary100100

member

Activity: 180

Merit: 10

Quote from: karim_hassan777 on August 21, 2019, 02:48:00 PM

Does any one know AMD team will resolve the Dag file problem for RX 5700 XT or not ?

+1
I've been logging on daily to see if there has been some update to this. Radeon VII cards are becoming scarce and I just started a 4800w 12 GPU mining rig that needs some cards! But what to use?

karim_hassan777

newbie

Activity: 58

Merit: 0

Does any one know AMD team will resolve the Dag file problem for RX 5700 XT or not ?

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: cirlama on August 21, 2019, 06:15:14 AM

Quote from: mu_enrico on August 21, 2019, 05:59:16 AM

Quote from: cirlama on August 21, 2019, 05:48:21 AM

Hi, "y" key at the initialization process of what?

For Claymore 14.7:

Quote from: Claymore on April 11, 2016, 10:30:36 AM

-y enables Compute Mode and disables CrossFire for AMD cards. "-y 1" works as pressing "y" key when miner starts. This option works in Windows only.

If you are running older version before "y option" implemented , you can change it manually one by one in "Radeon Settings" or use "amd-compute-mode-switcher-script" available somewhere on the internet.

Just use newest Claymore Cheesy

thanks, will try with the latest Claymore, with the W10 1903 build update, my couple of RX480-580 switched to non compute mode and the Radeon settings doesn't opened anymore (it just appears in tasks but the window doesn't open)... I need to sort that out (I tried briefly to re-install the AMD driver, but then only one card was there in graphic cards instead of 2, reverted to latest restore point)

When you install the AMD driver, install it without the “Settings”
Than use the compute-switcher parcher to turn them in compute mode

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 92. (Read 6590757 times)