Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 126.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Tomintx on March 09, 2017, 10:52:47 AM

Issues with Version 12.3:
- Some rigs will not run all GPUs since v12.0. With 12.0 and later, some GPUs report 0.00H/s rate. One of rigs has 7990, only uses one core. Have not tried 12.3 version on this unit, it runs 12.0 fine.
- Option -di detect will run very long time on a couple rigs. Would love to know a procedure to do this manually by switching GPUs on and off. How to map default GPU order to -di GPU order? This is an issue because miner will reduce intensity on the wrong card, leaving the hot card to keep getting hotter and eventually stop or crash the rig. Does the ordering need to be recalculated for different versions?
Linux rigs seem more stable than Wndows rigs.
Thanks for a great miner.

1. Set more virtual memory, use less "-i" value.
2. Use "-di detect" only once to get indexes, then specify them in "-di" option. Use 0...9 keys to enable-disable GPUs if you want to find physical GPU from its index.
GPU indexes are related to hardware/drivers only, the order is the same for all versions of all my miners because they just use OpenCL order.

Tomintx

member

Activity: 69

Merit: 10

Issues with Version 12.3:
- Some rigs will not run all GPUs since v12.0. With 12.0 and later, some GPUs report 0.00H/s rate. One of rigs has 7990, only uses one core. Have not tried 12.3 version on this unit, it runs 12.0 fine.

- Option -di detect will run very long time on a couple rigs. Would love to know a procedure to do this manually by switching GPUs on and off. How to map default GPU order to -di GPU order? This is an issue because miner will reduce intensity on the wrong card, leaving the hot card to keep getting hotter and eventually stop or crash the rig. Does the ordering need to be recalculated for different versions?

Linux rigs seem more stable than Wndows rigs.

Thanks for a great miner.

abz1

newbie

Activity: 15

Merit: 0

Hello,

When i try to launch my 5 cards remotely only 1 starts

They do work if i do it directly from the pc.

Is the a command i could use to fix this?

coinzoid

sr. member

Activity: 476

Merit: 250

Quote from: vapourminer on March 09, 2017, 08:56:45 AM

Quote from: coinzoid on March 09, 2017, 08:06:26 AM

how do you identify the hanging card? Besides one of my cards seems to not like downvolt. The order in device manager, mobo, sapphire trixx, and miner software... Are those all have same order? Lets say if GPU 0 is first gpu in miner, is it also first gpu on device manager and Sapphire Trixx program?

no. physical slot, msi afterburner (or trixx) and claymore numbers can be different. i made a chart and left it next to the rig.

you can probably identify a card in claymore by messing with its fan.

Yeah, thats the way I'm using so far.

hawer183

newbie

Activity: 21

Merit: 0

Quote from: br2459 on March 09, 2017, 09:00:50 AM

Quote from: hawer183 on March 09, 2017, 08:49:58 AM

Quote from: laik2 on March 09, 2017, 08:34:25 AM

Quote from: hawer183 on March 09, 2017, 08:30:07 AM

Quote from: laik2 on March 09, 2017, 08:16:47 AM

Quote from: hawer183 on March 09, 2017, 07:13:22 AM

Hey guys!

Does anyone have a problem with temperature and fan speed? Currently I have 4 GPUs in my rig and I using CL. v12.3. All my GPUs working fine, but I can see only the GPU0s temp and fan speed. Not showing or displaying the other 3.

What do you think guys? Is this a bug, or my config is wrong? Huh

ZEC: 03/09/17-13:02:36 - New job from eu1-zcash.flypool.org:3443 ZEC - Total Speed: 1149.394 H/s, Total Shares: 215, Rejected: 1, Time: 00:06 ZEC: GPU0 283.984 H/s, GPU1 291.354 H/s, GPU2 290.139 H/s, GPU3 283.918 H/s ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 1) ZEC: Share accepted (63 ms)! ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 3) ZEC: Share accepted (78 ms)! ZEC: 03/09/17-13:02:39 - SHARE FOUND - (GPU 2) ZEC: Share accepted (109 ms)! ZEC: 03/09/17-13:02:46 - SHARE FOUND - (GPU 0) ZEC: Share accepted (62 ms)! GPU0 t=70C fan=43%

This is my config:

Code:

-zpool ssl://eu1-zcash.flypool.org:3443
-zwal t1YfXXV4LTh2jQDUbmhasU5J8zJGyrpGmPL.r1
-zpsw x
-ttli 88
-i 7,7,7,7
-a 0
-asm 1,1,1,1
-powlim -10,-10,-10,-10
#-allpools 1

Thank You forward and have a great mining day fellas!

-ttli won't work without -tt option
Correct config is:
-tt 70
-ttli 85
-tstop 90

Hi!
Thank you for your help, but does not solve the problem. There is still only one GPUs temp and fan speed.
Any other idea?
Best Regards!
z

Are u kiddin me?
use -tt 70,70,70,70...and mostly read what's written in Readme it even has a few exclamation marks...

Thank you! I tried it!
I still have the bug! It is showing only 1 GPUs temp and fan!

This might seem like a silly question but did you check to make sure Crossfire wasn't enabled? I know when Crossfire is enabled on at least 2 GPU's it only shows 1 temp and fan speed.

Hi!
Crossfire is disabled. No clue what is the problem Sad

br2459

full member

Activity: 269

Merit: 102

Quote from: hawer183 on March 09, 2017, 08:49:58 AM

Quote from: laik2 on March 09, 2017, 08:34:25 AM

Quote from: hawer183 on March 09, 2017, 08:30:07 AM

Quote from: laik2 on March 09, 2017, 08:16:47 AM

Quote from: hawer183 on March 09, 2017, 07:13:22 AM

Hey guys!

Does anyone have a problem with temperature and fan speed? Currently I have 4 GPUs in my rig and I using CL. v12.3. All my GPUs working fine, but I can see only the GPU0s temp and fan speed. Not showing or displaying the other 3.

What do you think guys? Is this a bug, or my config is wrong? Huh

ZEC: 03/09/17-13:02:36 - New job from eu1-zcash.flypool.org:3443 ZEC - Total Speed: 1149.394 H/s, Total Shares: 215, Rejected: 1, Time: 00:06 ZEC: GPU0 283.984 H/s, GPU1 291.354 H/s, GPU2 290.139 H/s, GPU3 283.918 H/s ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 1) ZEC: Share accepted (63 ms)! ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 3) ZEC: Share accepted (78 ms)! ZEC: 03/09/17-13:02:39 - SHARE FOUND - (GPU 2) ZEC: Share accepted (109 ms)! ZEC: 03/09/17-13:02:46 - SHARE FOUND - (GPU 0) ZEC: Share accepted (62 ms)! GPU0 t=70C fan=43%

This is my config:

Code:

-zpool ssl://eu1-zcash.flypool.org:3443
-zwal t1YfXXV4LTh2jQDUbmhasU5J8zJGyrpGmPL.r1
-zpsw x
-ttli 88
-i 7,7,7,7
-a 0
-asm 1,1,1,1
-powlim -10,-10,-10,-10
#-allpools 1

Thank You forward and have a great mining day fellas!

-ttli won't work without -tt option
Correct config is:
-tt 70
-ttli 85
-tstop 90

Hi!
Thank you for your help, but does not solve the problem. There is still only one GPUs temp and fan speed.
Any other idea?
Best Regards!
z

Are u kiddin me?
use -tt 70,70,70,70...and mostly read what's written in Readme it even has a few exclamation marks...

Thank you! I tried it!
I still have the bug! It is showing only 1 GPUs temp and fan!

This might seem like a silly question but did you check to make sure Crossfire wasn't enabled? I know when Crossfire is enabled on at least 2 GPU's it only shows 1 temp and fan speed.

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: coinzoid on March 09, 2017, 08:06:26 AM

how do you identify the hanging card? Besides one of my cards seems to not like downvolt. The order in device manager, mobo, sapphire trixx, and miner software... Are those all have same order? Lets say if GPU 0 is first gpu in miner, is it also first gpu on device manager and Sapphire Trixx program?

no. physical slot, msi afterburner (or trixx) and claymore numbers can be different. i made a chart and left it next to the rig.

you can probably identify a card in claymore by messing with its fan.

hawer183

newbie

Activity: 21

Merit: 0

Quote from: laik2 on March 09, 2017, 08:34:25 AM

Quote from: hawer183 on March 09, 2017, 08:30:07 AM

Quote from: laik2 on March 09, 2017, 08:16:47 AM

Quote from: hawer183 on March 09, 2017, 07:13:22 AM

Hey guys!

Does anyone have a problem with temperature and fan speed? Currently I have 4 GPUs in my rig and I using CL. v12.3. All my GPUs working fine, but I can see only the GPU0s temp and fan speed. Not showing or displaying the other 3.

What do you think guys? Is this a bug, or my config is wrong? Huh

ZEC: 03/09/17-13:02:36 - New job from eu1-zcash.flypool.org:3443 ZEC - Total Speed: 1149.394 H/s, Total Shares: 215, Rejected: 1, Time: 00:06 ZEC: GPU0 283.984 H/s, GPU1 291.354 H/s, GPU2 290.139 H/s, GPU3 283.918 H/s ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 1) ZEC: Share accepted (63 ms)! ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 3) ZEC: Share accepted (78 ms)! ZEC: 03/09/17-13:02:39 - SHARE FOUND - (GPU 2) ZEC: Share accepted (109 ms)! ZEC: 03/09/17-13:02:46 - SHARE FOUND - (GPU 0) ZEC: Share accepted (62 ms)! GPU0 t=70C fan=43%

This is my config:

Code:

-zpool ssl://eu1-zcash.flypool.org:3443
-zwal t1YfXXV4LTh2jQDUbmhasU5J8zJGyrpGmPL.r1
-zpsw x
-ttli 88
-i 7,7,7,7
-a 0
-asm 1,1,1,1
-powlim -10,-10,-10,-10
#-allpools 1

Thank You forward and have a great mining day fellas!

-ttli won't work without -tt option
Correct config is:
-tt 70
-ttli 85
-tstop 90

Hi!
Thank you for your help, but does not solve the problem. There is still only one GPUs temp and fan speed.
Any other idea?
Best Regards!
z

Are u kiddin me?
use -tt 70,70,70,70...and mostly read what's written in Readme it even has a few exclamation marks...

Thank you! I tried it!
I still have the bug! It is showing only 1 GPUs temp and fan!

laik2

sr. member

Activity: 652

Merit: 266

Quote from: hawer183 on March 09, 2017, 08:30:07 AM

Quote from: laik2 on March 09, 2017, 08:16:47 AM

Quote from: hawer183 on March 09, 2017, 07:13:22 AM

Hey guys!

Does anyone have a problem with temperature and fan speed? Currently I have 4 GPUs in my rig and I using CL. v12.3. All my GPUs working fine, but I can see only the GPU0s temp and fan speed. Not showing or displaying the other 3.

What do you think guys? Is this a bug, or my config is wrong? Huh

ZEC: 03/09/17-13:02:36 - New job from eu1-zcash.flypool.org:3443 ZEC - Total Speed: 1149.394 H/s, Total Shares: 215, Rejected: 1, Time: 00:06 ZEC: GPU0 283.984 H/s, GPU1 291.354 H/s, GPU2 290.139 H/s, GPU3 283.918 H/s ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 1) ZEC: Share accepted (63 ms)! ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 3) ZEC: Share accepted (78 ms)! ZEC: 03/09/17-13:02:39 - SHARE FOUND - (GPU 2) ZEC: Share accepted (109 ms)! ZEC: 03/09/17-13:02:46 - SHARE FOUND - (GPU 0) ZEC: Share accepted (62 ms)! GPU0 t=70C fan=43%

This is my config:

Code:

-zpool ssl://eu1-zcash.flypool.org:3443
-zwal t1YfXXV4LTh2jQDUbmhasU5J8zJGyrpGmPL.r1
-zpsw x
-ttli 88
-i 7,7,7,7
-a 0
-asm 1,1,1,1
-powlim -10,-10,-10,-10
#-allpools 1

Thank You forward and have a great mining day fellas!

-ttli won't work without -tt option
Correct config is:
-tt 70
-ttli 85
-tstop 90

Hi!
Thank you for your help, but does not solve the problem. There is still only one GPUs temp and fan speed.
Any other idea?
Best Regards!
z

Are u kiddin me?
use -tt 70,70,70,70...and mostly read what's written in Readme it even has a few exclamation marks...

hawer183

newbie

Activity: 21

Merit: 0

Quote from: laik2 on March 09, 2017, 08:16:47 AM

Quote from: hawer183 on March 09, 2017, 07:13:22 AM

Hey guys!

Does anyone have a problem with temperature and fan speed? Currently I have 4 GPUs in my rig and I using CL. v12.3. All my GPUs working fine, but I can see only the GPU0s temp and fan speed. Not showing or displaying the other 3.

What do you think guys? Is this a bug, or my config is wrong? Huh

ZEC: 03/09/17-13:02:36 - New job from eu1-zcash.flypool.org:3443 ZEC - Total Speed: 1149.394 H/s, Total Shares: 215, Rejected: 1, Time: 00:06 ZEC: GPU0 283.984 H/s, GPU1 291.354 H/s, GPU2 290.139 H/s, GPU3 283.918 H/s ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 1) ZEC: Share accepted (63 ms)! ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 3) ZEC: Share accepted (78 ms)! ZEC: 03/09/17-13:02:39 - SHARE FOUND - (GPU 2) ZEC: Share accepted (109 ms)! ZEC: 03/09/17-13:02:46 - SHARE FOUND - (GPU 0) ZEC: Share accepted (62 ms)! GPU0 t=70C fan=43%

This is my config:

Code:

-zpool ssl://eu1-zcash.flypool.org:3443
-zwal t1YfXXV4LTh2jQDUbmhasU5J8zJGyrpGmPL.r1
-zpsw x
-ttli 88
-i 7,7,7,7
-a 0
-asm 1,1,1,1
-powlim -10,-10,-10,-10
#-allpools 1

Thank You forward and have a great mining day fellas!

-ttli won't work without -tt option
Correct config is:
-tt 70
-ttli 85
-tstop 90

Hi!
Thank you for your help, but does not solve the problem. There is still only one GPUs temp and fan speed.
Any other idea?
Best Regards!
z

laik2

sr. member

Activity: 652

Merit: 266

Quote from: hawer183 on March 09, 2017, 07:13:22 AM

Hey guys!

Does anyone have a problem with temperature and fan speed? Currently I have 4 GPUs in my rig and I using CL. v12.3. All my GPUs working fine, but I can see only the GPU0s temp and fan speed. Not showing or displaying the other 3.

What do you think guys? Is this a bug, or my config is wrong? Huh

ZEC: 03/09/17-13:02:36 - New job from eu1-zcash.flypool.org:3443 ZEC - Total Speed: 1149.394 H/s, Total Shares: 215, Rejected: 1, Time: 00:06 ZEC: GPU0 283.984 H/s, GPU1 291.354 H/s, GPU2 290.139 H/s, GPU3 283.918 H/s ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 1) ZEC: Share accepted (63 ms)! ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 3) ZEC: Share accepted (78 ms)! ZEC: 03/09/17-13:02:39 - SHARE FOUND - (GPU 2) ZEC: Share accepted (109 ms)! ZEC: 03/09/17-13:02:46 - SHARE FOUND - (GPU 0) ZEC: Share accepted (62 ms)! GPU0 t=70C fan=43%

This is my config:

Code:

-zpool ssl://eu1-zcash.flypool.org:3443
-zwal t1YfXXV4LTh2jQDUbmhasU5J8zJGyrpGmPL.r1
-zpsw x
-ttli 88
-i 7,7,7,7
-a 0
-asm 1,1,1,1
-powlim -10,-10,-10,-10
#-allpools 1

Thank You forward and have a great mining day fellas!

-ttli won't work without -tt option
Correct config is:
-tt 70
-ttli 85
-tstop 90

coinzoid

sr. member

Activity: 476

Merit: 250

how do you identify the hanging card? Besides one of my cards seems to not like downvolt. The order in device manager, mobo, sapphire trixx, and miner software... Are those all have same order? Lets say if GPU 0 is first gpu in miner, is it also first gpu on device manager and Sapphire Trixx program?

Quote from: beeboop on March 08, 2017, 08:51:28 PM

Just an update about my rig and how I temporarily fixed my hang issue.

I have a rig with 6 rx470s and ever since version 12.0 i have had issues with one of my GPUs hanging. I would have to restart the entire system every time this happened which was quite often. The last stable version for me was version 11. So I compared the differences from the two versions and the only thing I noticed was the different mining algorithm. All 12 versions defaulted my 470s to the faster ASM algorithm which worked fine on all my GPUs except one. the one that kept hanging. so i changed the algorithm for the GPU that was hanging back to the original one and I haven't had any issues since on version 12.3. My config file looks like this.

ZecMiner64.exe -zpool ssl://eu1-zcash.flypool.org:3443 -zwal zcashaddress.YourWorkerName -zpsw x -asm 1,1,1,1,1,0

0=card 5 (the card that would always hang)

Hope this helps!

hawer183

newbie

Activity: 21

Merit: 0

Hey guys!

Does anyone have a problem with temperature and fan speed? Currently I have 4 GPUs in my rig and I using CL. v12.3. All my GPUs working fine, but I can see only the GPU0s temp and fan speed. Not showing or displaying the other 3.

What do you think guys? Is this a bug, or my config is wrong? Huh

ZEC: 03/09/17-13:02:36 - New job from eu1-zcash.flypool.org:3443 ZEC - Total Speed: 1149.394 H/s, Total Shares: 215, Rejected: 1, Time: 00:06 ZEC: GPU0 283.984 H/s, GPU1 291.354 H/s, GPU2 290.139 H/s, GPU3 283.918 H/s ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 1) ZEC: Share accepted (63 ms)! ZEC: 03/09/17-13:02:38 - SHARE FOUND - (GPU 3) ZEC: Share accepted (78 ms)! ZEC: 03/09/17-13:02:39 - SHARE FOUND - (GPU 2) ZEC: Share accepted (109 ms)! ZEC: 03/09/17-13:02:46 - SHARE FOUND - (GPU 0) ZEC: Share accepted (62 ms)! GPU0 t=70C fan=43%

This is my config:

Code:

-zpool ssl://eu1-zcash.flypool.org:3443
-zwal t1YfXXV4LTh2jQDUbmhasU5J8zJGyrpGmPL.r1
-zpsw x
-ttli 88
-i 7,7,7,7
-a 0
-asm 1,1,1,1
-powlim -10,-10,-10,-10
#-allpools 1

Thank You forward and have a great mining day fellas!

Trasnadian

newbie

Activity: 38

Merit: 0

Quote from: kinsik on March 09, 2017, 04:31:26 AM

Quote from: hhdllhflower on March 08, 2017, 12:24:01 PM

ZEC: GPU0 455.346 H/s, GPU1 481.857 H/s, GPU2 460.153 H/s
v12.3 -i 7
gpu0 is fury
gpu1 is fury x
gpu2 is nano
for v12.2 can't use -i 7 , for v.12.3 i can use -i 7 but can't -i 8

Do you use "asm" algo for Fury or "2" ?

I have R9 nano, I use the -asm 1 for them.

kinsik

newbie

Activity: 39

Merit: 0

Quote from: hhdllhflower on March 08, 2017, 12:24:01 PM

ZEC: GPU0 455.346 H/s, GPU1 481.857 H/s, GPU2 460.153 H/s
v12.3 -i 7
gpu0 is fury
gpu1 is fury x
gpu2 is nano
for v12.2 can't use -i 7 , for v.12.3 i can use -i 7 but can't -i 8

Do you use "asm" algo for Fury or "2" ?

thesaltonsea

newbie

Activity: 64

Merit: 0

Hello,

how do you get 300 from 280x stock ? With anything more than -i 2 is freezing , and on 2 is doing 270-275sols. Can i use the new -old option and bigger -i without crash ?

HunterFX

newbie

Activity: 15

Merit: 0

Quote from: IOTUSA on March 08, 2017, 10:01:20 AM

That's not it. And this is a 100% clean and updated Windows 10 x64 install with 4GB ram, 20 GB virtual mem, and NOTHING but AMD 16.3 drivers and claymore installed. Blows my damn mind.

General behavior is:

1. A card (random) will hash at 0% while all others are fine
2. OpenCL call hangs.
3. Crash

Sometimes all cards will be hashing just dandy for a minute or two, then one drops, then OpenCL call fail on 1 card.

Parameter "-old 1" will help you

bitcoinsay

sr. member

Activity: 434

Merit: 255

Presale starts on 28th of April!

The stability is nice for 24 hours. But there seems to be no increase in speed.

ivomm

legendary

Activity: 1891

Merit: 3096

All good things to those who wait

My Sapphire 280x tri-x hang often with 12.3 (with stock clock and voltage). With 12.0 they work well, with 12.1 and 12.2 one of them keeps hanging, and with 12.3 all of them hang Huh

Tried lowering clocks, intensity and lowering/raising power control with no effect.

MilkTea

newbie

Activity: 7

Merit: 0

Quote from: forzendiablo on March 08, 2017, 11:02:02 PM

Quote from: beeboop on March 08, 2017, 08:51:28 PM

Just an update about my rig and how I temporarily fixed my hang issue.

I have a rig with 6 rx470s and ever since version 12.0 i have had issues with one of my GPUs hanging. I would have to restart the entire system every time this happened which was quite often. The last stable version for me was version 11. So I compared the differences from the two versions and the only thing I noticed was the different mining algorithm. All 12 versions defaulted my 470s to the faster ASM algorithm which worked fine on all my GPUs except one. the one that kept hanging. so i changed the algorithm for the GPU that was hanging back to the original one and I haven't had any issues since on version 12.3. My config file looks like this.

ZecMiner64.exe -zpool ssl://eu1-zcash.flypool.org:3443 -zwal zcashaddress.YourWorkerName -zpsw x -asm 1,1,1,1,1,0

0=card 5 (the card that would always hang)

Hope this helps!

Good idea, thanks i also have a card that fucks up. I will try this now

Same here. It only happens in multi-rig systems. The card in a slot on a one-rig system works fine (no riser, I mean). And I do not try to avoid it any more, because I found a remedy. Zec64miner restarts too quickly. You have to wait between iterations Set -r 1 option (quit on hang). and put Zec64Miner in an enless loop (while true; do; ... done) and WAIT at least 15 sec between iterations. Timewait (windows) , sleep 15s (linux).
Every 2-3 hours the hang occurs, But I never need to do a "hard reset" (push the on-off button and hope my filesystem is not gone)
And my rig(s) continues to produce sweet ZEC

;.. whilst sleeping Roll Eyes

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 126. (Read 3839201 times)