Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 122.

CitricAcid

newbie

Activity: 60

Merit: 0

Quote from: crazyearner on March 12, 2017, 01:05:56 PM

So I have the following

GPU0 67.457 H/s, GPU1 274.215 H/s, GPU2 269.094 H/s

GPU 0 seems to be running at a fraction of what the others are running at. Yet using same settings. Is this driver related ? Becasue gpu 0 is normally running at like gpu 1 and 2 is running however since adding in 3rd card now get gpu running at 67 aposed to mid 200s?

is the gpu in question the one your monitor is connected to? if yes then check to see if this is this set to:
setx GPU_FORCE_64BIT_PTR 1

if yes, change it to 0

doing so fixed it for me.

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: fittsy on March 12, 2017, 05:32:26 PM

Quote from: Joemid on March 12, 2017, 05:13:10 PM

Hello

I want to buy new risers. Witch is better one? What version can i bought on Amazon?

This is off topic so maybe we should delete from this thread?

Well I sell risers on Amazon... I have 6 packs of risers in stock at Amazon now. With free prime shipping.

In my opinion, green version 6 are best. Black version 6 were good but the factory started making them in a hurry and we started seeing a lot of defects. Blue version 6 I have no personal experience with but a friend fried one in high temperatures. Same guy that recommended we switch from black to green.

Red version 7 appear to be made by the same factory that makes black version 7. You can see similar qualities in the way they are built.

Damn there is version 7 already? Cheesy

Why do we need so many versions?
Here in shops I can mainly see blue version 5, which I have all my cards on.

As for earlier posts I run 480 and 380 on the same rig - Tonga doesnt benefit much from asm anyway.

Edit: DR_TAMFR_DHP 16.6 drivers? I think you need newer, I am on 16.10.3, but claymore recommends 16.12.2. Nicehash recommends 16.11.5.

DR_TAMFR_DHP

newbie

Activity: 26

Merit: 0

I am getting this crash after a couple of hours of mining (r9 380x is gpu affected) - 2 380x and 1 rx480, running on 16.60 drivers. maybe i need to uninstall those drivers and install 15.12? Hope I can find those drivers online.

WATCHDOG: GPU 1 hanges in OpenCL call, exit
WATCHDOG: GPU 1 hanges in OpenCL call, exit
WATCHDOG: GPU 1 hanges in OpenCL call, exit
WATCHDOG: GPU 1 hanges in OpenCL call, exit

And then system hangs.

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: Joemid on March 12, 2017, 05:13:10 PM

Hello

I want to buy new risers. Witch is better one? What version can i bought on Amazon?

This is off topic so maybe we should delete from this thread?

Well I sell risers on Amazon... I have 6 packs of risers in stock at Amazon now. With free prime shipping.

In my opinion, green version 6 are best. Black version 6 were good but the factory started making them in a hurry and we started seeing a lot of defects. Blue version 6 I have no personal experience with but a friend fried one in high temperatures. Same guy that recommended we switch from black to green.

Red version 7 appear to be made by the same factory that makes black version 7. You can see similar qualities in the way they are built.

Joemid

newbie

Activity: 44

Merit: 0

Hello

I want to buy new risers. Witch is better one? What version can i bought on Amazon?

Hurtman

full member

Activity: 180

Merit: 100

Couple of days ago at me miners ceased to connect
Before several months were everything normal
Miner writes that it can't be connected to the server
And any miner, Claymore or EWBF
But if I launch the NiceHash Miner program, then everything works
How I can solve a problem?

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: scryptr on March 12, 2017, 02:01:36 PM

RUN THE 300 SERIES CARDS TOGETHER--

Three 380X cards are enough to break a 750W PSU. The 400 series cards are not so compatible with earlier cards, and require AMD 16+ drivers. In my experience, 300 series cards mine more slowly on AMD 16+ drivers. I have read that 300 and 400 series cards can be mixed on AMD 16+ drivers, but I don't have a rig configured like that. R9 Fury cards mine really well mixed with 200 or 300 series cards, but the RX card should be kept with other RX cards.

I only tried it on Win 10 (maybe ethos too? don't remember...) Was able to run both 300 and 400 series cards together. However ethos and simplemining both recommended only running 400 series together so I can run 16.x drivers so that's what I did. I took the 380 off that rig. Now that rig is only rx 480s.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: DR_TAMFR_DHP on March 12, 2017, 12:46:46 PM

Quote from: DR_TAMFR_DHP on March 12, 2017, 01:54:14 AM

I had a disastrous day today. I attempted to add a second PSU to my rig along with a RX480. My rig was 3 r9 380x vid cards and a 750w power supply. Well I fried my motherboard. Which led me to having to get a new mobo, and cpu and memory (local fry's no longer carried lower end mobo that I was using).

Well I got everything hooked up, and the rig when only the RX 480 is hooked up runs just fine. I cannot boot into ubuntu when even 1 of the r9 380x's is plugged into the mobo. It just seems to hang.

Does anyone know if a 380x and rx 480 are not compatible? It seems like they use the same drivers. Not sure what is going on here. Do I just need to throw in the towel and ditch the 380x's and get more rx 480s?

Figured out my problem. My risers were fried too. And one of my 380x's. Have 2 380x and rx480 mining now. Have a new r9 Fury arriving Wednesday...

RUN THE 300 SERIES CARDS TOGETHER--

Three 380X cards are enough to break a 750W PSU. The 400 series cards are not so compatible with earlier cards, and require AMD 16+ drivers. In my experience, 300 series cards mine more slowly on AMD 16+ drivers. I have read that 300 and 400 series cards can be mixed on AMD 16+ drivers, but I don't have a rig configured like that. R9 Fury cards mine really well mixed with 200 or 300 series cards, but the RX card should be kept with other RX cards.

Sorry to hear about your motherboard, but I would double-triple check it and the CPU before tossing it. BAD RISERS are a very common problem, and enough to prevent booting. --scryptr

crazyearner

legendary

Activity: 1820

Merit: 1001

So I have the following

GPU0 67.457 H/s, GPU1 274.215 H/s, GPU2 269.094 H/s

GPU 0 seems to be running at a fraction of what the others are running at. Yet using same settings. Is this driver related ? Becasue gpu 0 is normally running at like gpu 1 and 2 is running however since adding in 3rd card now get gpu running at 67 aposed to mid 200s?

Pencila

newbie

Activity: 27

Merit: 0

Quote from: DR_TAMFR_DHP on March 12, 2017, 12:46:46 PM

Quote from: DR_TAMFR_DHP on March 12, 2017, 01:54:14 AM

I had a disastrous day today. I attempted to add a second PSU to my rig along with a RX480. My rig was 3 r9 380x vid cards and a 750w power supply. Well I fried my motherboard. Which led me to having to get a new mobo, and cpu and memory (local fry's no longer carried lower end mobo that I was using).

Well I got everything hooked up, and the rig when only the RX 480 is hooked up runs just fine. I cannot boot into ubuntu when even 1 of the r9 380x's is plugged into the mobo. It just seems to hang.

Does anyone know if a 380x and rx 480 are not compatible? It seems like they use the same drivers. Not sure what is going on here. Do I just need to throw in the towel and ditch the 380x's and get more rx 480s?

Figured out my problem. My risers were fried too. And one of my 380x's. Have 2 380x and rx480 mining now. Have a new r9 Fury arriving Wednesday...

How much did you pay for the new r9 Fury ?

DR_TAMFR_DHP

newbie

Activity: 26

Merit: 0

Quote from: DR_TAMFR_DHP on March 12, 2017, 01:54:14 AM

I had a disastrous day today. I attempted to add a second PSU to my rig along with a RX480. My rig was 3 r9 380x vid cards and a 750w power supply. Well I fried my motherboard. Which led me to having to get a new mobo, and cpu and memory (local fry's no longer carried lower end mobo that I was using).

Well I got everything hooked up, and the rig when only the RX 480 is hooked up runs just fine. I cannot boot into ubuntu when even 1 of the r9 380x's is plugged into the mobo. It just seems to hang.

Does anyone know if a 380x and rx 480 are not compatible? It seems like they use the same drivers. Not sure what is going on here. Do I just need to throw in the towel and ditch the 380x's and get more rx 480s?

Figured out my problem. My risers were fried too. And one of my 380x's. Have 2 380x and rx480 mining now. Have a new r9 Fury arriving Wednesday...

36524s

newbie

Activity: 37

Merit: 0

My Asus Stryx 390x = 405-410
Sapphire nitro 8gig R480x = 310
Sapphire nitro 8gig R480x with underclocking/volting = 290

crazyearner

legendary

Activity: 1820

Merit: 1001

DOes anyone know how to fix the error code Error 1603 with amd drivers installing http://support.amd.com/en-us/kb-articles/Pages/KB1603.aspx

I am getting this every time regardless of version number it wont allow me to install drivers. Does anyone have a fix for this. Taken gpu out one machine and worked in this. Put into another and now getting nothing but problems with it. Would this be card been as tho their all 480s or would it be the OS as done everything in regards to what amd support page says and getting nowhere.

Hoping someone here can maybe resolve

Matarin

newbie

Activity: 27

Merit: 0

Quote from: ?? on ??

hello
What are best settings now for MSI R9 390 8GB GPU?
Afterburner setings?
Command line .bat file?
What speed you get with Clay 12.3?
Thx for sharring

I have some XFX R9 390. I run them at 1000/1500 MHz. The speed is about 380H/s with 12.3.

cracker666

member

Activity: 79

Merit: 10

for my saphire r9 380 4gb in wattman gpu 1055 mem 1600 i get 225h/s

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal xxxxx.user -zpsw xxxxx -i 7 -a 1 -asm 1

been stable running for 48 + hrs now and 16.12. drivers

felixbrucker

hero member

Activity: 700

Merit: 500

@claymore: can you decrease the wait time when reboot.bat is executed so the miner closes faster? (with cmd option -r 1)

right now i have some kind of problem where the miner hangs in opencl calls and reboot.bat is tried to be executed (the miner shall only exit, no reboot.bat present), but after the execution of reboot.bat the miner doesnt exit but sits there for like 20-30 secs or something and only then exits

would be great if you could reduce that time down to some 1-2 secs

DR_TAMFR_DHP

newbie

Activity: 26

Merit: 0

I had a disastrous day today. I attempted to add a second PSU to my rig along with a RX480. My rig was 3 r9 380x vid cards and a 750w power supply. Well I fried my motherboard. Which led me to having to get a new mobo, and cpu and memory (local fry's no longer carried lower end mobo that I was using).

Well I got everything hooked up, and the rig when only the RX 480 is hooked up runs just fine. I cannot boot into ubuntu when even 1 of the r9 380x's is plugged into the mobo. It just seems to hang.

Does anyone know if a 380x and rx 480 are not compatible? It seems like they use the same drivers. Not sure what is going on here. Do I just need to throw in the towel and ditch the 380x's and get more rx 480s?

MonkeyDo

newbie

Activity: 4

Merit: 0

hi claymore

I'm using ubuntu 16.04 with and 16.60 driver
only get around 150h on an rx480 8g
try the different setting but no luck.
working fine on windows.

any idea?

BigWeb

newbie

Activity: 1

Merit: 0

Hi,

12.3 version with one RX480 on Win7 hangs with interesting behavior :

See image (sorry i cant find attachment option here, so used tinypic):

http://i63.tinypic.com/ea35n7.jpg

In other words it looks like miner restarts, but not really, thus number of instances are increasing until system hangs . so ion first fail it starts 2 threads, then 3, then 4... etc (all in one cmd window).

I tried -r 360, but it hangs faster than that

Im not saving log files, (deleted on every reboot or miner restart) so haven't got this handy now. But maybe you can help be using screenshot.

Thanks

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: Cryptohminer on March 11, 2017, 09:22:09 AM

Quote from: kinsik on March 11, 2017, 08:53:50 AM

Quote from: Osakiman on March 11, 2017, 02:45:10 AM

Quote from: kinsik on March 10, 2017, 02:07:37 PM

I wonder why my Sapphiry Fury Nitro show 0 sols with asm algo. Anyone experienced this?

You need to reduce the intensity to -i 6 or lower.

That does not help. Tried even intensity 1. With - asm 0 I get 400 sols.

With this card, i only tried (-asm 1) and i get 430+ sols, using 15.12 drivers.
Quick guess, double check your driver version, as Windows loves to forcefully update the driver.

how much power does the fury consume while mining zec

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 122. (Read 3839201 times)