Anyone has a Sapphire 470 8gb with OC ?
Share speeds pls
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 672. (Read 3839163 times)
V 3.0 i m getting
73 on r9 390
42 r9 380
36 r9 270
49 rx 470 4g
73 on r9 390
42 r9 380
36 r9 270
49 rx 470 4g
I'm getting 50-55 on r9 390, what drivers and i setting you use?
16.10.3 with 1090 gpu 1525 memory I2
See https://www.youtube.com/watch?v=Mwb67g4skGM
If you have two cards (or built-in video, in case something goes wrong), you can try to take timings from frequency 1500Mhz - will be work even faster.
This may not be on all the cards, my card works with latency rate from 1350 Mhz.
If you have two cards (or built-in video, in case something goes wrong), you can try to take timings from frequency 1500Mhz - will be work even faster.
This may not be on all the cards, my card works with latency rate from 1350 Mhz.
You copied the 1350 timings to the higher frequencies?
I had about 15 times to flash the BIOS, to find the right latency (until memory is beginning to work perfectly)
Version 3 has given more power to gain, thank you. 
The version 3.0 gives error:
The older versions work without any problem. When I start v3.0, the pc gives error and resart winwods again.
6x R9 390X
Code:
VIDEO_TDR_FAILURE
atikmpag.sys
atikmpag.sys
The older versions work without any problem. When I start v3.0, the pc gives error and resart winwods again.
6x R9 390X
Solution:
-Uninstall 16.2 driver
-Install 15.12 driver
It works now. But I see 55 - 60 Mh/s (R9 390X)
my problem is not your a thief and steal someone's code , i hope your not my problem is the FEE I wish you would give us a some way to pay to unlock it instead you say if i don't like it don't use it ,my repose back is I have to if I want to mine and use windows sense i don't write code and not to good at it. or I would write my own and wouldn't use your miner and as it stands once there is a working version of silent army for windows, i won't use it , right now i have to . I don't hate you, we all have to make a living some way or another . i hope you understand why i feel like i do and why . I'm sure you will ignore this because you don't care .
thanks top .
thanks top .
So you could get 80H/s on Claymore, or 78H/s after fee. Or you could get 50H/s on SilentArmy with no fee. Nothing against SA miner, and I am all for FOSS, just saying speeds aren't as fast. Claymore is making this super fast miner, use it or don't? You don't HAVE to use it. You could just not mine at all. His many many hours of work enable you to get good returns on mining, quit complaining. Having a paid miner is dumb, makes it harder for the small miner, and you don't know how good it will be until you buy it. Plus it adds a lot of useless overhead for Claymore micro managing all the sales.
Claymore is MEGA-monster! 
RX480 4G with mod. mem timings = 70-72 sol\sec
RX480 4G with mod. mem timings = 70-72 sol\sec
Really? Just memory timings? No overclocking? Could you please share those timings? My Sapphire 480 4GB are doing -50...
guys what about this ? is there any chance to modify the miner config which can mine on one pool for two workers ? 90% of hashing power for one and 10% hashing power to another?
or are there any other options ?
anyone ?
or are there any other options ?
anyone ?
See https://www.youtube.com/watch?v=Mwb67g4skGM
If you have two cards (or built-in video, in case something goes wrong), you can try to take timings from frequency 1500Mhz - will be work even faster.
This may not be on all the cards, my card works with latency rate from 1350 Mhz.
If you have two cards (or built-in video, in case something goes wrong), you can try to take timings from frequency 1500Mhz - will be work even faster.
This may not be on all the cards, my card works with latency rate from 1350 Mhz.
You copied the 1350 timings to the higher frequencies?
Claymore is MEGA-monster!
RX480 4G with mod. mem timings = 70-72 sol\sec
RX480 4G with mod. mem timings = 70-72 sol\sec
Which RX? I have 480s which are running at 62-65 on Boysie 29MH rom
Claymore is MEGA-monster!
RX480 4G with mod. mem timings = 70-72 sol\sec
RX480 4G with mod. mem timings = 70-72 sol\sec
Really? Just memory timings? No overclocking? Could you please share those timings? My Sapphire 480 4GB are doing -50...
my problem is not your a thief and steal someone's code , i hope your not my problem is the FEE I wish you would give us a some way to pay to unlock it instead you say if i don't like it don't use it ,my repose back is I have to if I want to mine and use windows sense i don't write code and not to good at it. or I would write my own and wouldn't use your miner and as it stands once there is a working version of silent army for windows, i won't use it , right now i have to . I don't hate you, we all have to make a living some way or another . i hope you understand why i feel like i do and why . I'm sure you will ignore this because you don't care .
thanks top .
thanks top .
When you will push linux build???
I used low voltage mod for all my cards (200+) they were hashing ETH on 29.8 I was kinda glad with it and using much less power
Yes, 29mh\s and 40-50W power per card much more profitable than 32mh\s and 150-180W per card 
)
MSI 390x 84-85, 12x 390x=1000h/s.. GOOD JOB CLAYMORE!!!! 
))
))Let me guess your CPU must be either an i7 or some expensive Xeon processor
i7 4790k on one rig and i5 4690k on second rig
)
wow.. Great job @Claymore !! You are a hero
is there any chance to modify the miner config which can mine on one pool for two workers ? 90% of hashing power for one and 10% hashing power to another?
or are there any other options ?
and also how you guys are getting 60 and 70+ sols on RX480 ? maximum I'm getting on RX480 8g is 55sols
You need modify card BIOS for best results (change memory timings on high clocks).or are there any other options ?
and also how you guys are getting 60 and 70+ sols on RX480 ? maximum I'm getting on RX480 8g is 55sols
Sources for the mod what to change and where? A good howto or guide?
See https://www.youtube.com/watch?v=Mwb67g4skGM - very easy instruction
Don't mod your bioses for the RX series like you did with ETH.
They not only will crash, they will FREEZE your system.
they are running for a week or so now and all is good with ETH modded low voltage roms, so far so good They not only will crash, they will FREEZE your system.
AMD Cards available: 3
10:39:00:458 2d10 GPU #0: Ellesmere, 4096 MB available, 32 compute units
10:39:00:459 2d10 GPU #1: Hawaii, 8192 MB available, 44 compute units
10:39:00:459 2d10 GPU #1 recognized as Radeon 390X
10:39:00:459 2d10 GPU #2: Hawaii, 4096 MB available, 44 compute units
10:39:00:459 2d10 GPU #2 recognized as Radeon 290X
10:39:00:460 2d10 POOL version
10:39:00:460 2d10 b154
10:39:00:460 2d10 Platform: Windows
10:39:00:468 2d10 start building OpenCL program...
GPU #0: Ellesmere, 4096 MB available, 32 compute units
10:40:05:928 14fc GPU #1: Hawaii, 8192 MB available, 44 compute units
10:40:05:929 14fc GPU #2: Hawaii, 4096 MB available, 44 compute units
10:40:05:929 14fc ZEC - Total Speed: 201.878 H/s, Total Shares: 52, Rejected: 0, Time: 00:00
10:40:05:930 14fc ZEC: GPU0 49.533 H/s, GPU1 82.655 H/s, GPU2 69.689 H/s
10:40:05:931 14fc Pool switches: ZEC - 0
10:40:05:932 14fc Current ZEC pool share target: 0x01555555 (diff: 192H)
10:40:05:962 14fc GPU0 t=53C fan=55%, GPU1 t=50C fan=20%, GPU2 t=51C fan=55%
10:40:05:964 14fc
8 core 8350 with win 10 latest drivers
10:39:00:458 2d10 GPU #0: Ellesmere, 4096 MB available, 32 compute units
10:39:00:459 2d10 GPU #1: Hawaii, 8192 MB available, 44 compute units
10:39:00:459 2d10 GPU #1 recognized as Radeon 390X
10:39:00:459 2d10 GPU #2: Hawaii, 4096 MB available, 44 compute units
10:39:00:459 2d10 GPU #2 recognized as Radeon 290X
10:39:00:460 2d10 POOL version
10:39:00:460 2d10 b154
10:39:00:460 2d10 Platform: Windows
10:39:00:468 2d10 start building OpenCL program...
GPU #0: Ellesmere, 4096 MB available, 32 compute units
10:40:05:928 14fc GPU #1: Hawaii, 8192 MB available, 44 compute units
10:40:05:929 14fc GPU #2: Hawaii, 4096 MB available, 44 compute units
10:40:05:929 14fc ZEC - Total Speed: 201.878 H/s, Total Shares: 52, Rejected: 0, Time: 00:00
10:40:05:930 14fc ZEC: GPU0 49.533 H/s, GPU1 82.655 H/s, GPU2 69.689 H/s
10:40:05:931 14fc Pool switches: ZEC - 0
10:40:05:932 14fc Current ZEC pool share target: 0x01555555 (diff: 192H)
10:40:05:962 14fc GPU0 t=53C fan=55%, GPU1 t=50C fan=20%, GPU2 t=51C fan=55%
10:40:05:964 14fc
8 core 8350 with win 10 latest drivers
Jump to: