Did 4gb 480 get same speed as 8gb 480 on zec? and eth?
I'd love to know the answer to this question too! or ANY comparison of the two 480's with 4 or 8 gb memory... to see just what difference it makes.
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 741. (Read 3839163 times)
I'd love to know the answer to this question too! or ANY comparison of the two 480's with 4 or 8 gb memory... to see just what difference it makes.
Hi Claymore.
Amazing job
Thanks for that amazing piece of programing.
I think you should charge 4% for the miner.
Nothing more stabke or faster out there.
At least until something equivalent gets out.
If people arent happy, they can use something else lol.
Again thanks again for the miner and all your support.
Amazing job
Thanks for that amazing piece of programing.
I think you should charge 4% for the miner.
Nothing more stabke or faster out there.
At least until something equivalent gets out.
If people arent happy, they can use something else lol.
Again thanks again for the miner and all your support.
Did 4gb 480 get same speed as 8gb 480 on zec? and eth?
No 8GB is a little faster.
30MH/s instead of 28MH/s for ETH
50Sols instead of 40Sols for ZEC.
pc keeps restarting, whats that normally from?
Thanks
Thanks
Modded bios ?
pc keeps restarting, whats that normally from?
Thanks
Thanks
Did 4gb 480 get same speed as 8gb 480 on zec? and eth?
The 7950/7970/280x were always the best mining cards due to their large memory bandwidth.
If it wasn't for the DAG file in ETH they would still hash at 27MH/s.
During the Litecoin days they hashed at 80% of the speed of a 290 and cost only 60% of the price. They were forgotten with ETH mining but are now back and killing RX480s.
If it wasn't for the DAG file in ETH they would still hash at 27MH/s.
During the Litecoin days they hashed at 80% of the speed of a 290 and cost only 60% of the price. They were forgotten with ETH mining but are now back and killing RX480s.
Should i keep it to the max or go back to the default settings? My rig is a 6 x hd shappire 7950.
Thanks
OC sucks, just flash lower vMEM timings \m/
In case anyone wants to know what 6 280x hash.
It floats around 245 to 265 H/s stock settings.
https://s15.postimg.org/gl0gagabf/280x_hashrate_Zcash.png
https://s21.postimg.org/lu6i4wilz/Zcash_280x.png
It floats around 245 to 265 H/s stock settings.
https://s15.postimg.org/gl0gagabf/280x_hashrate_Zcash.png
https://s21.postimg.org/lu6i4wilz/Zcash_280x.png
Its reducilous that a two generation old card is faster than the Rx cards
the RX cards should be getting at least 60 SOLS
@Claymore:
Dev fee connect and disconnect work well in nanopool. However, upon disconnecting from your pool, it takes like 20~30 s to reconnect to nanopool
It's too long...
Dev fee connect and disconnect work well in nanopool. However, upon disconnecting from your pool, it takes like 20~30 s to reconnect to nanopool
It's too long...
In case anyone wants to know what 6 280x hash.
It floats around 245 to 265 H/s stock settings.
https://s15.postimg.org/gl0gagabf/280x_hashrate_Zcash.png
https://s21.postimg.org/lu6i4wilz/Zcash_280x.png
It floats around 245 to 265 H/s stock settings.
https://s15.postimg.org/gl0gagabf/280x_hashrate_Zcash.png
https://s21.postimg.org/lu6i4wilz/Zcash_280x.png
Ah sorry, corrected line for suprnova:
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal YourUsername.YourWorker -zpsw YourWorkerPass -allpools 1
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal YourUsername.YourWorker -zpsw YourWorkerPass -allpools 1
For those who are more experienced with mining. What would happen if i increase the Memory Clock From 1250 to 1575. I noticed an increase of around 20 sols from 215 to 235. But i'm thinking this could damage or low the life expectancy but i dont know.
Should i keep it to the max or go back to the default settings? My rig is a 6 x hd shappire 7950.
Thanks
Should i keep it to the max or go back to the default settings? My rig is a 6 x hd shappire 7950.
Thanks
You can overclock it to 1575 but most likely the speed won't increase that much. THe 7950 will handle it.
Anyone here tried running ETH miner at the same time?
For those who are more experienced with mining. What would happen if i increase the Memory Clock From 1250 to 1575. I noticed an increase of around 20 sols from 215 to 235. But i'm thinking this could damage or low the life expectancy but i dont know.
Should i keep it to the max or go back to the default settings? My rig is a 6 x hd shappire 7950.
Thanks
most likely the driver will crash and also the miner, you need te increase the memory clock little by little to see it where is the "limit" , good luck and happy mining Should i keep it to the max or go back to the default settings? My rig is a 6 x hd shappire 7950.
Thanks
Claymore, thanks. My old AMD rig has life back into it, and your 2.5% model is a good one.
Any chance you can make this work with Nvidia cards? I have a 1070 sli gaming rig and I bet
Pascal would crush it. Supporting Nvidia would double your profits! Let us know.
Any chance you can make this work with Nvidia cards? I have a 1070 sli gaming rig and I bet
Pascal would crush it. Supporting Nvidia would double your profits! Let us know.
watch here https://bitcointalksearch.org/topic/silentarmy-v5-zcash-miner-115-sols-on-r9-nano-70-sols-on-gtx-1070-1666489 from what I understand, he wrote what every one is using now including what this miner does and when you See V4 Nvidia support it may happen here . v5 ports it to windows .
dont think u need exactly 15.12, just need 15.12 or higher
im using 16.9.2 with no issues
well i have 2 rigs one with 3x rx480 8gb, and the second with 2x r9 390x 1x r9 290x 8 gb, and there is only about 15-20 sols so i was thinking of changing the driver version since it appears to be recommended by the creator of the miner just a thought. im using 16.9.2 with no issues
The new RX 4xx requires newer drivers than the 15.12, at least 16.x
I use 16.9.2 without issues
For those who are more experienced with mining. What would happen if i increase the Memory Clock From 1250 to 1575. I noticed an increase of around 20 sols from 215 to 235. But i'm thinking this could damage or low the life expectancy but i dont know.
Should i keep it to the max or go back to the default settings? My rig is a 6 x hd shappire 7950.
Thanks
Should i keep it to the max or go back to the default settings? My rig is a 6 x hd shappire 7950.
Thanks
Claymore, thanks. My old AMD rig has life back into it, and your 2.5% model is a good one.
Any chance you can make this work with Nvidia cards? I have a 1070 sli gaming rig and I bet
Pascal would crush it. Supporting Nvidia would double your profits! Let us know.
Any chance you can make this work with Nvidia cards? I have a 1070 sli gaming rig and I bet
Pascal would crush it. Supporting Nvidia would double your profits! Let us know.
There are many things that I want to improve in this miner, it requires a lot of time. I hope other devs can create fast public miner for NVidia.
Claymore, thanks. My old AMD rig has life back into it, and your 2.5% model is a good one.
Any chance you can make this work with Nvidia cards? I have a 1070 sli gaming rig and I bet
Pascal would crush it. Supporting Nvidia would double your profits! Let us know.
Any chance you can make this work with Nvidia cards? I have a 1070 sli gaming rig and I bet
Pascal would crush it. Supporting Nvidia would double your profits! Let us know.
Jump to: