hey, any support for amd gpus : rx 5600/5700?
Topic: SILENTARMY v5: Zcash miner, 115 sol/s on R9 Nano, 70 sol/s on GTX 1070 (Read 209309 times)
April 26, 2020, 03:44:26 PM
June 23, 2018, 04:10:45 PM
Hello
how is it supposed to work on linux?
I have download the linux version binary:
Run the command from readme:
# ./silentarmy --use 0 -c stratum+tcp://us1-zcash.flypool.org:3333 -u t1cVviFvgJinQ4w3C2m2CfRxgP5DnHYaoFC
./silentarmy: unrecognized option '-c'
Try './silentarmy --help'
for example this works:
# ./silentarmy --list
Devices on platform "NVIDIA CUDA":
ID 0: P104-100
ID 1: P104-100
ID 2: P104-100
ID 3: P104-100
ID 4: P104-100
ID 5: P104-100
thank you
how is it supposed to work on linux?
I have download the linux version binary:
Run the command from readme:
# ./silentarmy --use 0 -c stratum+tcp://us1-zcash.flypool.org:3333 -u t1cVviFvgJinQ4w3C2m2CfRxgP5DnHYaoFC
./silentarmy: unrecognized option '-c'
Try './silentarmy --help'
for example this works:
# ./silentarmy --list
Devices on platform "NVIDIA CUDA":
ID 0: P104-100
ID 1: P104-100
ID 2: P104-100
ID 3: P104-100
ID 4: P104-100
ID 5: P104-100
thank you
October 25, 2017, 06:30:51 AM
Do any mining sofware work with 18-24 GPU's?
Thinking about this one
http://www.ebay.com/itm/PCI-E-Slot-Expansion-Kit-1-to-4-Ports-Switch-Multiplier-Hub-Riser-Card-USB-CAAU-/172783675614?hash=item283ab5a8de:g:n48AAOSwJdZZbJEe
and this one
http://www.ebay.com/itm/1-Port-PCI-E-1X-To-3-Slot-1X-Switch-Multiplier-Expander-HUB-Expansion-Riser-Card-/232355046854?epid=929725712&hash=item361970a5c6:g:vCwAAOSwIaFZLnlx
Slot-Expansion doesn't work with gtx 10xx. Thinking about this one
http://www.ebay.com/itm/PCI-E-Slot-Expansion-Kit-1-to-4-Ports-Switch-Multiplier-Hub-Riser-Card-USB-CAAU-/172783675614?hash=item283ab5a8de:g:n48AAOSwJdZZbJEe
and this one
http://www.ebay.com/itm/1-Port-PCI-E-1X-To-3-Slot-1X-Switch-Multiplier-Expander-HUB-Expansion-Riser-Card-/232355046854?epid=929725712&hash=item361970a5c6:g:vCwAAOSwIaFZLnlx
July 27, 2017, 08:17:23 AM
Do any mining sofware work with 18-24 GPU's?
Thinking about this one
http://www.ebay.com/itm/PCI-E-Slot-Expansion-Kit-1-to-4-Ports-Switch-Multiplier-Hub-Riser-Card-USB-CAAU-/172783675614?hash=item283ab5a8de:g:n48AAOSwJdZZbJEe
and this one
http://www.ebay.com/itm/1-Port-PCI-E-1X-To-3-Slot-1X-Switch-Multiplier-Expander-HUB-Expansion-Riser-Card-/232355046854?epid=929725712&hash=item361970a5c6:g:vCwAAOSwIaFZLnlx
Thinking about this one
http://www.ebay.com/itm/PCI-E-Slot-Expansion-Kit-1-to-4-Ports-Switch-Multiplier-Hub-Riser-Card-USB-CAAU-/172783675614?hash=item283ab5a8de:g:n48AAOSwJdZZbJEe
and this one
http://www.ebay.com/itm/1-Port-PCI-E-1X-To-3-Slot-1X-Switch-Multiplier-Expander-HUB-Expansion-Riser-Card-/232355046854?epid=929725712&hash=item361970a5c6:g:vCwAAOSwIaFZLnlx
July 01, 2017, 02:39:39 PM
hey dead thread, just wondering if it's possible to modify the N=200, K=9 to something else entirely, should take me a few hours, if i knew where to start 
.
using sgminer with silentarmy kernels, just doing some work in progress learning
. using sgminer with silentarmy kernels, just doing some work in progress learning
June 20, 2017, 09:42:16 AM
Hi guys,
I'm using a single powercolor R9 280x and i'm getting 70 to 74 sol/s. The settings are core - 1100 and mem - 1700, atitweak power tune - 18% and the temp is around 70 degress, can I do better or is this it for a single gpu.
Cheers
I'm using a single powercolor R9 280x and i'm getting 70 to 74 sol/s. The settings are core - 1100 and mem - 1700, atitweak power tune - 18% and the temp is around 70 degress, can I do better or is this it for a single gpu.
Cheers
It is better to use Claymore.
June 11, 2017, 11:49:48 PM
Hi guys,
I'm using a single powercolor R9 280x and i'm getting 70 to 74 sol/s. The settings are core - 1100 and mem - 1700, atitweak power tune - 18% and the temp is around 70 degress, can I do better or is this it for a single gpu.
Cheers
Hi.. You can get much better results with claymore 12.5 or optiminer 1.7 I'm using a single powercolor R9 280x and i'm getting 70 to 74 sol/s. The settings are core - 1100 and mem - 1700, atitweak power tune - 18% and the temp is around 70 degress, can I do better or is this it for a single gpu.
Cheers
June 11, 2017, 10:42:58 PM
Hi guys,
I'm using a single powercolor R9 280x and i'm getting 70 to 74 sol/s. The settings are core - 1100 and mem - 1700, atitweak power tune - 18% and the temp is around 70 degress, can I do better or is this it for a single gpu.
Cheers
I'm using a single powercolor R9 280x and i'm getting 70 to 74 sol/s. The settings are core - 1100 and mem - 1700, atitweak power tune - 18% and the temp is around 70 degress, can I do better or is this it for a single gpu.
Cheers
May 12, 2017, 12:45:35 AM
I have problem when run claymore, 6 gpu not work but hang and it work good for 5 gpu
motherboard Asrok Z97
driver 16.9.2
how fix it?
motherboard Asrok Z97
driver 16.9.2
how fix it?
If there is no code 43 error, then reduce the frequency.
May 09, 2017, 12:50:49 AM
I have problem when run claymore, 6 gpu not work but hang and it work good for 5 gpu
motherboard Asrok Z97
driver 16.9.2
how fix it?
Try to set pci-e mode in bios to gen-1. I have the same mobo with 6 cards. motherboard Asrok Z97
driver 16.9.2
how fix it?
May 05, 2017, 05:40:55 AM
I have problem when run claymore, 6 gpu not work but hang and it work good for 5 gpu
motherboard Asrok Z97
driver 16.9.2
how fix it?
motherboard Asrok Z97
driver 16.9.2
how fix it?
April 04, 2017, 08:29:12 AM
I'd certainly say it needs someone to design a nice solution rather than just try fiddling the fees (and you can now make the fee lower
March 30, 2017, 01:58:10 AM
I'd certainly say it needs someone to design a nice solution rather than just try fiddling the fees (and you can now make the fee lower
March 16, 2017, 03:34:18 AM
March 03, 2017, 05:20:52 PM
But dont work
atitweak? Or you still see same problem in miner?
Atitweak
Code:
dexx01@dexx02:~$ atitweak -p 20
Traceback (most recent call last):
File "/usr/local/bin/atitweak", line 24, in
from adl3 import *
File "/usr/local/lib/python2.7/dist-packages/adl3/__init__.py", line 1, in
from .adl_api import *
File "/usr/local/lib/python2.7/dist-packages/adl3/adl_api.py", line 42, in
_libadl = CDLL("libatiadlxx.so", mode=RTLD_GLOBAL)
File "/usr/lib/python2.7/ctypes/__init__.py", line 362, in __init__
self._handle = _dlopen(self._name, mode)
OSError: libatiadlxx.so: cannot open shared object file: No such file or directory
Traceback (most recent call last):
File "/usr/local/bin/atitweak", line 24, in
from adl3 import *
File "/usr/local/lib/python2.7/dist-packages/adl3/__init__.py", line 1, in
from .adl_api import *
File "/usr/local/lib/python2.7/dist-packages/adl3/adl_api.py", line 42, in
_libadl = CDLL("libatiadlxx.so", mode=RTLD_GLOBAL)
File "/usr/lib/python2.7/ctypes/__init__.py", line 362, in __init__
self._handle = _dlopen(self._name, mode)
OSError: libatiadlxx.so: cannot open shared object file: No such file or directory
January 30, 2017, 06:20:36 AM
January 04, 2017, 12:05:33 PM
Hey guys! MinerGate pool now also supports Zcash mining via SILENTARMY
Settings here: https://minergate.com/altminers/silentarmy
Example: silentarmy -c stratum+tcp://zec.pool.minergate.com:3357 -u YOUR_EMAIL
Pool fee on MinerGate is 1% on PPLNS
Settings here: https://minergate.com/altminers/silentarmy
Example: silentarmy -c stratum+tcp://zec.pool.minergate.com:3357 -u YOUR_EMAIL
Pool fee on MinerGate is 1% on PPLNS
minergate is a pile of sheet.
January 04, 2017, 11:59:54 AM
Will it be developed further?
December 31, 2016, 05:11:22 AM
I have not moved on, but in this period of end-of-year festivities, I am spending more time with family and less working on SA. So v6 will be ready when it is ready. Right now it is a work in progress. I have code mostly finished that in theory should be roughly as fast as Claymore, but I am unable to tell how fast it is because a bug I have yet to track down leads to incorrect results being generated.
Nicehash has announced they will be open-sourcing their miner. Definitely worth looking into when that happens.
December 26, 2016, 12:39:03 PM
Hey guys! MinerGate pool now also supports Zcash mining via SILENTARMY
Settings here: https://minergate.com/altminers/silentarmy
Example: silentarmy -c stratum+tcp://zec.pool.minergate.com:3357 -u YOUR_EMAIL
Pool fee on MinerGate is 1% on PPLNS
Settings here: https://minergate.com/altminers/silentarmy
Example: silentarmy -c stratum+tcp://zec.pool.minergate.com:3357 -u YOUR_EMAIL
Pool fee on MinerGate is 1% on PPLNS
Jump to: