Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 752.

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: Claymore on November 04, 2016, 01:25:24 PM

Quote from: JuanHungLo on November 04, 2016, 01:19:08 PM

Claymore, really nice job. Just a general question: You have hard coded the dev fee pools to be active, 90 seconds an hour, right?
You also have failover activated for the dev fee, too.
Do you limit the dev fee overall time per hour if your hardcoded pools are non-responsive?

If devfee mining thread cannot reach pool, main mining is not stopped at all.
However, if it cannot connect for a couple of hours, entire mining will be stopped.

Thanks for your prompt reply. I was just going through the logfile and noticed Dev Fee being longer than 90 secs.

nanona

full member

Activity: 307

Merit: 101

Quote from: wpalczynski on November 04, 2016, 01:24:43 PM

Quote from: snakey on November 04, 2016, 01:12:49 PM

You need to add -tt for fan and temp

With that you specify target values, Im saying its only showing temp and fan stats for 1 of my 2 GPUs.

-tt 1

Read the Readme!!!.txt

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: rednoW on November 04, 2016, 01:25:58 PM

Quote from: doktor83 on November 04, 2016, 01:25:10 PM

Quote from: PPOC on November 04, 2016, 01:24:13 PM

Does this work on Nicehash? or only zec pools?

-zpool equihash.usa.nicehash.com:3357
-u btcaddress.worker
-zpsw z
-tt 75

not working with btc address, must be Z address

not true

put in a btcaddress.worker and it will throw an error

PPOC

hero member

Activity: 575

Merit: 500

Quote from: rednoW on November 04, 2016, 01:25:58 PM

Quote from: doktor83 on November 04, 2016, 01:25:10 PM

Quote from: PPOC on November 04, 2016, 01:24:13 PM

Does this work on Nicehash? or only zec pools?

-zpool equihash.usa.nicehash.com:3357
-u btcaddress.worker
-zpsw z
-tt 75

not working with btc address, must be Z address

not true

So whats the config to use on nice hash?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: vectisitch on November 04, 2016, 01:25:06 PM

Quote from: mitache365 on November 04, 2016, 01:19:35 PM

So now we all have same cards, will mine same amount of coins, just see different numbers but will mine 2.5% for Claymore also. And we are more happy than yesterday, right?

are you not seeing higher sols at your pool end?? does that not mean more coins mined for you??? seriously???

pool shows same speed as before on nicehash 0.4

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: doktor83 on November 04, 2016, 01:25:10 PM

Quote from: PPOC on November 04, 2016, 01:24:13 PM

Does this work on Nicehash? or only zec pools?

-zpool equihash.usa.nicehash.com:3357
-u btcaddress.worker
-zpsw z
-tt 75

not working with btc address, must be Z address

not true

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: JuanHungLo on November 04, 2016, 01:19:08 PM

Claymore, really nice job. Just a general question: You have hard coded the dev fee pools to be active, 90 seconds an hour, right?
You also have failover activated for the dev fee, too.
Do you limit the dev fee overall time per hour if your hardcoded pools are non-responsive?

If devfee mining thread cannot reach pool, main mining is not stopped at all.
However, if it cannot connect for a couple of hours, entire mining will be stopped.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: PPOC on November 04, 2016, 01:24:13 PM

Does this work on Nicehash? or only zec pools?

-zpool equihash.usa.nicehash.com:3357
-u btcaddress.worker
-zpsw z
-tt 75

not working with btc address, must be Z address

vectisitch

legendary

Activity: 1927

Merit: 1004

Quote from: mitache365 on November 04, 2016, 01:19:35 PM

So now we all have same cards, will mine same amount of coins, just see different numbers but will mine 2.5% for Claymore also. And we are more happy than yesterday, right?

are you not seeing higher sols at your pool end?? does that not mean more coins mined for you??? seriously???

salecz

full member

Activity: 189

Merit: 100

Od rodjenja mog....

Wolf must be in some hole right now?

wpalczynski

legendary

Activity: 1456

Merit: 1000

Quote from: snakey on November 04, 2016, 01:12:49 PM

Quote from: wpalczynski on November 04, 2016, 01:11:33 PM

I have 2 GPUs but its always showing me temp and fan speed for GPU0 even though it shows both hashing at around 40. r9 290... Anyone else seeing this?

You need to add -tt for fan and temp

With that you specify target values, Im saying its only showing temp and fan stats for 1 of my 2 GPUs.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: arielbit on November 04, 2016, 01:23:14 PM

Quote from: doktor83 on November 04, 2016, 01:20:58 PM

Quote from: mitache365 on November 04, 2016, 01:19:35 PM

So now we all have same cards, will mine same amount of coins, just see different numbers but will mine 2.5% for Claymore also. And we are more happy than yesterday, right?

wise words my friend, that was my tought too

i'm thinking we and claymore took a slice of profit from private miners and farms.

i think if we got a miner that gives X amount of sols, then farms have miners that give 3X amount of sols

PPOC

hero member

Activity: 575

Merit: 500

Does this work on Nicehash? or only zec pools?

-zpool equihash.usa.nicehash.com:3357
-u btcaddress.worker
-zpsw z
-tt 75

sunsofdust

full member

Activity: 151

Merit: 100

Quote from: Jareklt on November 04, 2016, 01:21:29 PM

Quote from: TheRider on November 04, 2016, 01:15:49 PM

Quote from: Jareklt on November 04, 2016, 12:59:41 PM

6x380 Asus 4G moded bios = 200h/s
6x470 Nitro 8G moded bios = 300h/s

Claymore, you are the best!!!

What's your bios mod for the 470 Nitro? Just tighter timing straps? Overclock? or both?

here is the bios I am using

https://www.dropbox.com/sh/p3isa01rbyhzofe/AAAoc5xvsvgAe68HeijD7A2Oa?dl=0

Is there a modded bios for the Sapphire RX 480 Nitro?

arielbit

legendary

Activity: 3416

Merit: 1059

Quote from: doktor83 on November 04, 2016, 01:20:58 PM

Quote from: mitache365 on November 04, 2016, 01:19:35 PM

So now we all have same cards, will mine same amount of coins, just see different numbers but will mine 2.5% for Claymore also. And we are more happy than yesterday, right?

wise words my friend, that was my tought too

i'm thinking we and claymore took a slice of profit from private miners and farms.

Jareklt

newbie

Activity: 18

Merit: 0

Quote from: TheRider on November 04, 2016, 01:15:49 PM

Quote from: Jareklt on November 04, 2016, 12:59:41 PM

6x380 Asus 4G moded bios = 200h/s
6x470 Nitro 8G moded bios = 300h/s

Claymore, you are the best!!!

What's your bios mod for the 470 Nitro? Just tighter timing straps? Overclock? or both?

here is the bios I am using

https://www.dropbox.com/sh/p3isa01rbyhzofe/AAAoc5xvsvgAe68HeijD7A2Oa?dl=0

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: mitache365 on November 04, 2016, 01:19:35 PM

So now we all have same cards, will mine same amount of coins, just see different numbers but will mine 2.5% for Claymore also. And we are more happy than yesterday, right?

wise words my friend, that was my tought too

s3000s

newbie

Activity: 8

Merit: 0

i love you .

mitache365

hero member

Activity: 732

Merit: 500

So now we all have same cards, will mine same amount of coins, just see different numbers but will mine 2.5% for Claymore also. And we are more happy than yesterday, right?

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Claymore, really nice job. Just a general question: You have hard coded the dev fee pools to be active, 90 seconds an hour, right?

You also have failover activated for the dev fee, too.

Do you limit the dev fee overall time per hour if your hardcoded pools are non-responsive?

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 752. (Read 3839163 times)