Topic: [CLOSED] batch #23/24 .105 btc USB + 4 btc NEW Blade miners - page 12. (Read 37395 times)
September 08, 2013, 10:48:52 PM
anyone interested in my 58 coupons units?
September 08, 2013, 10:46:04 PM
ok well.. I guess ill have 45 btc available on Thursday... ffs!
September 08, 2013, 10:45:15 PM
Anyone elses Coinbase account get changed?
For months I was BTC50 per day Instant.
I go to buy BTC45
and now
10 instant per week?? SERIOUSLY??
For months I was BTC50 per day Instant.
I go to buy BTC45
and now
Quote
Level 2 and above can also buy up to 10 BTC per week instantly with no delays.
10 instant per week?? SERIOUSLY??
I got the same.
Are the blades still available in stock?
yes, blaades are still in stock
September 08, 2013, 10:44:21 PM
September 08, 2013, 10:35:50 PM
Anyone elses Coinbase account get changed?
For months I was BTC50 per day Instant.
I go to buy BTC45
and now
10 instant per week?? SERIOUSLY??
For months I was BTC50 per day Instant.
I go to buy BTC45
and now
Quote
Level 2 and above can also buy up to 10 BTC per week instantly with no delays.
10 instant per week?? SERIOUSLY??
This explains some of the annoying issues I've been having with Coinbase lately.. Wow. Talk about a downgrade. From having 50 BTC/day instant to 10 BTC / week instant? Thats.. ouch.
Their site says:
"Level 2 and above can also buy up to 10 BTC per week instantly with no delays."
They refer to "Level 2 and above" but at the moment they only have Level 2 available as the highest level. So what's the "and above" ? Perhaps a new tier they will be announcing?
September 08, 2013, 10:35:35 PM
Just got my level 2 recently. Checked just now and it does say I have a limit of 50 daily, but an instant limit of 10 weekly... =/
September 08, 2013, 10:32:52 PM
it says you can purchase 50 BTC per day but 10 instant per week so the rest will take few days to deposit in your account
September 08, 2013, 10:31:41 PM
Anyone elses Coinbase account get changed?
For months I was BTC50 per day Instant.
I go to buy BTC45
and now
10 instant per week?? SERIOUSLY??
For months I was BTC50 per day Instant.
I go to buy BTC45
and now
Quote
Level 2 and above can also buy up to 10 BTC per week instantly with no delays.
10 instant per week?? SERIOUSLY??
I used it the other day and it showed 50btc limit per day. I used it for 8 not 45, and it said 42btc for the day left....could it be based on your credit?
or did you bounce/lack funds in the account at one point?
September 08, 2013, 10:31:09 PM
Anyone elses Coinbase account get changed?
For months I was BTC50 per day Instant.
I go to buy BTC45
and now
10 instant per week?? SERIOUSLY??
For months I was BTC50 per day Instant.
I go to buy BTC45
and now
Quote
Level 2 and above can also buy up to 10 BTC per week instantly with no delays.
10 instant per week?? SERIOUSLY??
I got the same.
Are the blades still available in stock?
September 08, 2013, 09:16:54 PM
local pickup???
I'm from Ohio currently staying in NE ohio and i have to either go to Chicago or have some large servers shipped (costly) to me - so a 300 mile trip each way would actually make sense in this case
looking at getting 20 blades / two back planes
it would be tuesday
I'm from Ohio currently staying in NE ohio and i have to either go to Chicago or have some large servers shipped (costly) to me - so a 300 mile trip each way would actually make sense in this case
looking at getting 20 blades / two back planes
it would be tuesday
September 08, 2013, 09:14:23 PM
these troubles are why I sold my 3 blades without even trying to hook them up. I have 94 sticks about the same as 3 blades.
if I have an issue it is a hub or a few sticks.
If one blade has a problem it is just like 30-33 sticks going bad. it is a bit cheaper to run the blades.
who is running 3 blades at 31gh total? what is your watts used?
my 94 sticks cost me 400 watts Counting everything. 3 blades should pull close to 300 watts add the switch and the router you are at 325 watts.
A power issue and all 3 blades could go down. but 3 blades are 12 btc power source say 13 -14 btc
94 sticks and the hubs are 20 btc
if I have an issue it is a hub or a few sticks.
If one blade has a problem it is just like 30-33 sticks going bad. it is a bit cheaper to run the blades.
who is running 3 blades at 31gh total? what is your watts used?
my 94 sticks cost me 400 watts Counting everything. 3 blades should pull close to 300 watts add the switch and the router you are at 325 watts.
A power issue and all 3 blades could go down. but 3 blades are 12 btc power source say 13 -14 btc
94 sticks and the hubs are 20 btc
September 08, 2013, 08:02:53 PM
Got the blade but it seems broken, it shows all "x" in Chip status 
Make sure you have a sufficient power supply.
Tried with a 500W and a single rail 750W, all "x"
Maybe it would help to post in Dogie's thread?
https://bitcointalk.org/index.php?topic=205369.480
September 08, 2013, 07:56:10 PM
Newer blades don't have a clock feature.
Ohhhhh. right...
September 08, 2013, 07:53:50 PM
Newer blades don't have a clock feature.
September 08, 2013, 07:48:05 PM
Got the blade but it seems broken, it shows all "x" in Chip status
Make sure you have a sufficient power supply.
Tried with a 500W and a single rail 750W, all "x"
Is your clock on "Low" ?
September 08, 2013, 07:42:34 PM
Got the blade but it seems broken, it shows all "x" in Chip status
Make sure you have a sufficient power supply.
Tried with a 500W and a single rail 750W, all "x"
I have an HX 750 running a blade and 2 60 GH/s singles Kill-a-watt says 616W at the wall (with netbook host).
So you probably have enough power. How did you wire the power? Follow dogie's post? I would check the voltage going in with a DMM. Should be around 12.2~12.5 depending on power supply.
September 08, 2013, 07:38:28 PM
Got the blade but it seems broken, it shows all "x" in Chip status
Make sure you have a sufficient power supply.
Tried with a 500W and a single rail 750W, all "x"
September 08, 2013, 07:04:22 PM
i want to order a blade but i would like to know how to run it with cgminer or bfgminer as i read that it does not support stratum from the webpage setup is that true?
I believe you can set it up by pointing to an instance of bfgminer running on a machine a blade can reach over the network. Checkout Eligius pool and Luke-Jr's posts/instructions. I think this is the way Luke intended it to work recently... Wish someone can put a step-by step for bfgminer.
1. Build BFGMiner on Linux, following the directions in the README file.
2. Start BFGMiner with the '--http-port' option to set the port to connect to:
Code:
bfgminer --http-port-c
3. Configure the blades to connect to the machine running BFGMiner on the port you specified.
The blade has to have two pools to mine to, so you have to type everything twice, as below.
In the "Ports" box, you would type 8330,8330 (or whatever port you specified above)
In the "Server Addresses" box, you would type
In the "user:pass" box, you would type any username:password you want, but each blade must have a different user name. Remember to do it twice: myusername1:abc123,myusername1:abc123
The blade will then start mining and will show up in BFGMiner as device SGW0, SGW1, etc.
For Windows grab mining_proxy the exe here http://btc.anapaapps.com/mining_proxy.php
It comes with a pre made BTC guild shortcut.
For other pools change " -o stratum.btcguild.com -p 3333" in the Target box to your pools information.
September 08, 2013, 07:02:06 PM
Got the blade but it seems broken, it shows all "x" in Chip status
Make sure you have a sufficient power supply.
September 08, 2013, 06:28:52 PM
i want to order a blade but i would like to know how to run it with cgminer or bfgminer as i read that it does not support stratum from the webpage setup is that true?
I believe you can set it up by pointing to an instance of bfgminer running on a machine a blade can reach over the network. Checkout Eligius pool and Luke-Jr's posts/instructions. I think this is the way Luke intended it to work recently... Wish someone can put a step-by step for bfgminer.
1. Build BFGMiner on Linux, following the directions in the README file.
2. Start BFGMiner with the '--http-port' option to set the port to connect to:
Code:
bfgminer --http-port-c
3. Configure the blades to connect to the machine running BFGMiner on the port you specified.
The blade has to have two pools to mine to, so you have to type everything twice, as below.
In the "Ports" box, you would type 8330,8330 (or whatever port you specified above)
In the "Server Addresses" box, you would type
In the "user:pass" box, you would type any username:password you want, but each blade must have a different user name. Remember to do it twice: myusername1:abc123,myusername1:abc123
The blade will then start mining and will show up in BFGMiner as device SGW0, SGW1, etc.
Jump to: