Pages:
Author

Topic: [CLOSED] batch #32 0.65 btc per Blade, 49-port HUBS .30 or less - page 10. (Read 55817 times)

hero member
Activity: 728
Merit: 503
dApps Development Automation Platform
I need "4 hubs and 200 be. Ill be home from work in a few hours..
I'll hold them for you. thanks!!

What kinda boxes do you need prepaids for these?

4 Hubs  207 Block Erupters

Im home =)

ITS MY FRIDAY!
donator
Activity: 2352
Merit: 1060
between a rock and a block!
visually, looks correct and same as the official part number, just can't tell if that's actually what they will ship you.  but it looks right and the price is VERY good!
donator
Activity: 2352
Merit: 1060
between a rock and a block!
hold 1 hub and 50 sticks >  I will order in about an hour.
you got it!



 tx id for 1.75 btc


https://blockchain.info/tx/c0f9b1a421b24cd0aa790845c0341a80eadd9130c6020347e27482f5269b5096


1Fo2K52Rz7LZw9fcF5BDdDBjfNaViQ8J3x


my refund address.   .. did you need a region b box label? and what is the email  address to send the label

region B works or medium, whichever is cheaper for you.  region b box weight should be specified at about 3 pounds
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
hold 1 hub and 50 sticks >  I will order in about an hour.
you got it!



 tx id for 1.75 btc


https://blockchain.info/tx/c0f9b1a421b24cd0aa790845c0341a80eadd9130c6020347e27482f5269b5096


1Fo2K52Rz7LZw9fcF5BDdDBjfNaViQ8J3x


my refund address.   .. did you need a region b box label? and what is the email  address to send the label
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
So does anyone have instructions on how to wire an ATX connector to the above PSU in pics?


https://www.dropbox.com/s/v81yz2trp91025l/Photo%20Nov%2001%2C%204%2023%2023%20PM.jpg

You can use something like that, for both the blades and USB miners
donator
Activity: 2352
Merit: 1060
between a rock and a block!
I need "4 hubs and 200 be. Ill be home from work in a few hours..
I'll hold them for you. thanks!!
donator
Activity: 2352
Merit: 1060
between a rock and a block!
hold 1 hub and 50 sticks >  I will order in about an hour.
you got it!
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
hold 1 hub and 50 sticks >  I will order in about an hour.
hero member
Activity: 728
Merit: 503
dApps Development Automation Platform
I need "4 hubs and 200 be. Ill be home from work in a few hours..
hero member
Activity: 504
Merit: 500
legendary
Activity: 1232
Merit: 1000
You need to balance the load between the three outputs.
newbie
Activity: 56
Merit: 0
So does anyone have instructions on how to wire an ATX connector to the above PSU in pics?


Whithout having one in front of me:  find the pinout assignment for all the +5v connectors on the psu (the wiki page should show you which ones and they're usually the same color) connect those to that psu's + side, then connect all the black ones to the negative side.

I'LL provide a pic once mine gets in and go into more detail, but this should get a few people going in the right direction.

Tong
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
So does anyone have instructions on how to wire an ATX connector to the above PSU in pics?


I have not seen the PSU but I suspect you could just connect all of the red wires to V+, all of the black wires to V-.  The rest of the wires could be removed from the 24 pin connector or ignored.  I think they all float on the hub side except for the green wire that turns on the ATX power supply. 
This wire is even mute with a dedicated 5V PSU.  I think I would rather wire in a switch on the 5V PSU.
donator
Activity: 2352
Merit: 1060
between a rock and a block!
So does anyone have instructions on how to wire an ATX connector to the above PSU in pics?
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
Just updated prices on blades.

Also, there are no more USBs available from the manufacturer.  Whatever remains on hand at resellers is it folks.  Once they're gone, they won't be restocked or made again.

I still have plenty on hand with good color selection and offcourse 50 units include the 49 port USB hub.

Are the blades still in production? Or are they stopping production on all BE100 based miners.  Maybe gearing up for V2? Wink

if they made a new stick they need  a different chip.    even 1gh-1.5gh stick with power at 2.5 to 3 watts would work. 

V2 = smaller process node, same design.  Maybe then, higher clocks and/or x2 chips per stick would achieve 1-1.5Gh.
newbie
Activity: 3
Merit: 0
1.75 sent for 50 USB's and Hub

Transaction Id:  ee678f305119148eaa4bfb33d943cc333208b13435233b5d081cf5aed7cd9fa4

Payment address:  1PJ1A1ukF1CqDsmNd7QVdmCyt4bsQFo9pA

Label sent in email

Thanks

 
 
 
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Just updated prices on blades.

Also, there are no more USBs available from the manufacturer.  Whatever remains on hand at resellers is it folks.  Once they're gone, they won't be restocked or made again.

I still have plenty on hand with good color selection and offcourse 50 units include the 49 port USB hub.

Are the blades still in production? Or are they stopping production on all BE100 based miners.  Maybe gearing up for V2? Wink

if they made a new stick they need  a different chip.    even 1gh-1.5gh stick with power at 2.5 to 3 watts would work. 
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
Just updated prices on blades.

Also, there are no more USBs available from the manufacturer.  Whatever remains on hand at resellers is it folks.  Once they're gone, they won't be restocked or made again.

I still have plenty on hand with good color selection and offcourse 50 units include the 49 port USB hub.

Are the blades still in production? Or are they stopping production on all BE100 based miners.  Maybe gearing up for V2? Wink
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
a close up of the psu   note the red electrical tape over the 3 ac power wires is for safety as it is live power .





last the psu is good for  26amp 130 watts at 5 volts    my 4 hubs are 28 sticks and pull 100 watts at the wall.  so this is a great setup for 28 sticks.





this would be a perfect  setup for the bitfury sticks

 hint hint
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
okay my photos of 4x    7 port hubs hooked up.  


using the magic dc power wires blue led is cool red is dead.



a low cost 3 prong switch from lowes. 




the cut 3 prong power cord from an old power strip  one in the switch from lowes and to the psu

Pages:
Jump to: