Topic: [CLOSED] batch #32 0.65 btc per Blade, 49-port HUBS .30 or less - page 7. (Read 55837 times)
November 04, 2013, 09:30:01 PM
Got my hub today, can't get it to work in windows 7, any advice? Do I need certain drivers?
November 04, 2013, 06:48:09 PM
WARNING! Limited # of Hubs remain...
out of bitcoins for now
November 04, 2013, 06:46:35 PM
WARNING! Limited # of Hubs remain...
has the price come down with BTC on the go?
November 04, 2013, 06:15:45 PM
WARNING! Limited # of Hubs remain...
Buy, buy, buy!
November 04, 2013, 05:49:40 PM
WARNING! Limited # of Hubs remain...
November 04, 2013, 05:49:05 PM
[]http://i42.tinypic.com/2i9qw74.jpg[/img]
mining @ http://eligius.st/~wizkid057/newstats/userstats.php/1PLCBv4fcXMzWPMJUJCcBiguB33iPe8axn
shall see how this turns out. have 8 "extras" going to try and sell off for paypal at a markup.....hubs i planned on using them are not handling them very nice
quick update...not sure what changes i made (moved a bunch of cables around...pretty much) but all 57 are now hashing and powered by the 30amp 5volt (along with a usb wifi card) and some 12v miners. power supply is a champ! mining @ http://eligius.st/~wizkid057/newstats/userstats.php/1PLCBv4fcXMzWPMJUJCcBiguB33iPe8axn
shall see how this turns out. have 8 "extras" going to try and sell off for paypal at a markup.....hubs i planned on using them are not handling them very nice
two blades plugged in and hashing 165 watts according to the killawatt
think i need to add a second fan to each blade
(edit: dare i say these blades are also champs? one 80mm low speed/noise fan each just barely warm to the touch and "22.5 minutes 20.98 Gh/s")
http://eligius.st/~wizkid057/newstats/userstats.php/192BdwAewJLtjBVnH8FGvsceUACjwXvLeK
[]http://i43.tinypic.com/ka5h5l.jpg[/img]
and second set of blades are up and running.
thanks for the 3 smooth transactions. roughly 60GH added to the network to replace my old 3200mh fpga setup
November 04, 2013, 05:07:07 PM
It is very hard to load all those sticks. Kind of fun to push limits on one pc. I believe I will get up to 135 sticks on the 3x 49 port hubs.
It is fun isn't it? I'm using computer PSU's to power things I never thought I would lol. And my computer looks like Frankenstein with things plugged in all over the place.
I do have a question for you though. How easy do you think it would be to wire a 5v PSU into an ATX connector for these hubs. And do you think it would actually work? A PSU like this for example:
http://www.circuitspecialists.com/hf300w-s-5.html
I think you see where I am going with this...2 hubs on 1 PSU...
November 04, 2013, 04:49:29 PM
[]http://i42.tinypic.com/2i9qw74.jpg[/img]
mining @ http://eligius.st/~wizkid057/newstats/userstats.php/1PLCBv4fcXMzWPMJUJCcBiguB33iPe8axn
shall see how this turns out. have 8 "extras" going to try and sell off for paypal at a markup.....hubs i planned on using them are not handling them very nice
quick update...not sure what changes i made (moved a bunch of cables around...pretty much) but all 57 are now hashing and powered by the 30amp 5volt (along with a usb wifi card) and some 12v miners. power supply is a champ! mining @ http://eligius.st/~wizkid057/newstats/userstats.php/1PLCBv4fcXMzWPMJUJCcBiguB33iPe8axn
shall see how this turns out. have 8 "extras" going to try and sell off for paypal at a markup.....hubs i planned on using them are not handling them very nice
two blades plugged in and hashing 165 watts according to the killawatt
think i need to add a second fan to each blade
(edit: dare i say these blades are also champs? one 80mm low speed/noise fan each just barely warm to the touch and "22.5 minutes 20.98 Gh/s")
http://eligius.st/~wizkid057/newstats/userstats.php/192BdwAewJLtjBVnH8FGvsceUACjwXvLeK
[]http://i43.tinypic.com/ka5h5l.jpg[/img]
and second set of blades are up and running.
thanks for the 3 smooth transactions. roughly 60GH added to the network to replace my old 3200mh fpga setup
November 04, 2013, 04:04:44 PM
sbfree; 3 x USB/HUB KITS; 5.25; 215a54f0c167b0a2136cc1f92eea59ec76f9862229aa4211804944c8689fb51d
canary, can you tell me the shipping requirement for these 3, and I will send label asap. I just could not find any info. on that, sorry.
sbfree
canary, can you tell me the shipping requirement for these 3, and I will send label asap. I just could not find any info. on that, sorry.
sbfree
November 04, 2013, 03:43:28 PM
anyone have a tutorial on how to set up the backplane with atx psu? my backplane just came in, and my server power supply wont be here til thursday
November 04, 2013, 02:25:38 PM
I believe the mobo's usb ports can run 3x 49 port hubs with about 120 sticks. >>>>>>> must be under the the 127 devices per port limit
Just for the sake of clarity, the limit of 127 devices is per host controller, not per port.
I don't know for sure how many host controllers are on that main board, but I believe there are 3 of them, not counting any added PCI cards.
November 04, 2013, 02:10:54 PM
It is very hard to load all those sticks. Kind of fun to push limits on one pc. I believe I will get up to 135 sticks on the 3x 49 port hubs.
It is fun isn't it? I'm using computer PSU's to power things I never thought I would lol. And my computer looks like Frankenstein with things plugged in all over the place.
I do have a question for you though. How easy do you think it would be to wire a 5v PSU into an ATX connector for these hubs. And do you think it would actually work? A PSU like this for example:
http://www.circuitspecialists.com/hf300w-s-5.html
I think you see where I am going with this...2 hubs on 1 PSU...
November 04, 2013, 01:58:05 PM
I got a third hub today. It is up and running . I was able to get 3 hubs to run on my asus maximus V gene motherboard .
I am running 121 sticks on bitminter total of 41gh.
It is very hard to load all those sticks. Kind of fun to push limits on one pc. I believe I will get up to 135 sticks on the 3x 49 port hubs.
YOU CAN'T DO THIS WITHOUT A PCIE CARD WITH USB 2.0 PORTS
THIS low cost one allowed me to run 2 hubs with 85 sticks.
http://www.amazon.com/gp/product/B0026I4DZ2/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
I believe this card can run 3x 49 hubs with about 120 sticks. >>>>>> must be under the 127 devices per limit.
I believe the mobo's usb ports can run 3x 49 port hubs with about 120 sticks. >>>>>>> must be under the the 127 devices per port limit
This means I could do about 240 sticks on this setup.
photos later.
I am running 121 sticks on bitminter total of 41gh.
It is very hard to load all those sticks. Kind of fun to push limits on one pc. I believe I will get up to 135 sticks on the 3x 49 port hubs.
YOU CAN'T DO THIS WITHOUT A PCIE CARD WITH USB 2.0 PORTS
THIS low cost one allowed me to run 2 hubs with 85 sticks.
http://www.amazon.com/gp/product/B0026I4DZ2/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
I believe this card can run 3x 49 hubs with about 120 sticks. >>>>>> must be under the 127 devices per limit.
I believe the mobo's usb ports can run 3x 49 port hubs with about 120 sticks. >>>>>>> must be under the the 127 devices per port limit
This means I could do about 240 sticks on this setup.
photos later.
November 04, 2013, 09:48:27 AM
Making today's last run to USPS in 30
canary, any word on the cube price and specs?
2 btc
30-38gh
120 watts
there is a site in Canada taking pre orders..
http://www.wtcr.ca/catalog/product/bm-ambec-01
and a German thread mentions 120 watts. My German is not that good so the 120 watts may be an error.
the german thread
https://bitcointalksearch.org/topic/m.3465116
and in reading it again the 120 watts may be wrong
I have to say that a 2btc cube that is usb plug n play and is 30-38gh will sell. Even if it is more like 220 watts vs 120 watts.
its already for sale on ebay, although very expensive, 3 blades are cheaper. Going forward anything over $10/GH is not worth it, next diff is already at 505 and growing. http://www.ebay.com/itm/NEW-CUBE-ASICMiner-30GH-s-to-38GH-s-not-block-erupter-blade-asic-BTC-fpga-gpu-/200983367706?pt=LH_DefaultDomain_0&hash=item2ecb8ad01a
November 04, 2013, 09:42:57 AM
Coinbase is getting too expensive to buy BTC in USA.
Anyone know of a cheaper Alternative?
Anyone know of a cheaper Alternative?
November 04, 2013, 09:18:14 AM
Anyone looking for 50 blades + plz PM me.
Canary sounds like you have some blades to sell
With the cube coming out soon would you be willing to discount an order of 10 blades? November 04, 2013, 08:40:38 AM
Making today's last run to USPS in 30
canary, any word on the cube price and specs?
2 btc
30-38gh
120 watts
there is a site in Canada taking pre orders..
http://www.wtcr.ca/catalog/product/bm-ambec-01
and a German thread mentions 120 watts. My German is not that good so the 120 watts may be an error.
the german thread
https://bitcointalksearch.org/topic/m.3465116
and in reading it again the 120 watts may be wrong
I have to say that a 2btc cube that is usb plug n play and is 30-38gh will sell. Even if it is more like 220 watts vs 120 watts.
November 04, 2013, 07:22:50 AM
Any hub packages left?
November 03, 2013, 10:45:53 PM
Not sure if this text is still needed, but:
Krellan; 100; 3.5; 12JXrgup9NJdwp5rWqnqXJ57RN4hYHY8i6
Krellan; 100; 3.5; 12JXrgup9NJdwp5rWqnqXJ57RN4hYHY8i6
November 03, 2013, 10:21:17 PM
Bought some more.
Helipotte; 1.75; BEx50+hub 16AP5qJH6urahX5KxvMTySFM6oGhjSkXWe
Transaction ID: 19d0f0543eb7cdb93d742a57252ea180e1649759d3009b562484e55d95d69e26
Thanks!
Canary, could you send different colors? Last order was 30 black and 20 red. If you have them.
Sure! please add a note to your email about this please so that I can record it on the label printout as instructions for packing.Helipotte; 1.75; BEx50+hub 16AP5qJH6urahX5KxvMTySFM6oGhjSkXWe
Transaction ID: 19d0f0543eb7cdb93d742a57252ea180e1649759d3009b562484e55d95d69e26
Thanks!
Canary, could you send different colors? Last order was 30 black and 20 red. If you have them.
Thanks!
Jump to: