[CLOSED] batch #32 0.65 btc per Blade, 49-port HUBS .30 or less - page 3.

xzempt

hero member

Activity: 504

Merit: 500

Quote from: lyth0s on November 12, 2013, 05:58:37 PM

Quote from: xzempt on November 12, 2013, 07:29:43 AM

320-500W wtf... so this is nothing more than the 5ghs blades that were only available in china earlier this year? same chips, same inefficiency, just packaged up to look like a bfl little single.... Cry

must say im very disappointed in ASICMiner right now... and no stratum support.... getwork.....

How do you know it doesn't support stratum?

look at the instructions and the interface, Proxy , Longpoll, mining on port 8332 efficiency 89% lol

i'm sure i'll end up with a couple just because..... but i was expecting something better.....

Does Moore's Law not apply to ASICminer?

http://en.wikipedia.org/wiki/Moore's_law

they should have chips at least comparable to bitfury 55nm by now...

lyth0s

legendary

Activity: 1260

Merit: 1000

World Class Cryptonaire

Quote from: xzempt on November 12, 2013, 07:29:43 AM

320-500W wtf... so this is nothing more than the 5ghs blades that were only available in china earlier this year? same chips, same inefficiency, just packaged up to look like a bfl little single.... Cry

must say im very disappointed in ASICMiner right now... and no stratum support.... getwork.....

How do you know it doesn't support stratum?

bmoconno

sr. member

Activity: 280

Merit: 261

New In Town...

Quote from: xzempt on November 12, 2013, 07:29:43 AM

320-500W wtf... so this is nothing more than the 5ghs blades that were only available in china earlier this year? same chips, same inefficiency, just packaged up to look like a bfl little single.... Cry

must say im very disappointed in ASICMiner right now... and no stratum support.... getwork.....

This. Exactly this! Not as super excited about this hardware as I had previously been… but if the price is right… Wink

xzempt

hero member

Activity: 504

Merit: 500

320-500W wtf... so this is nothing more than the 5ghs blades that were only available in china earlier this year? same chips, same inefficiency, just packaged up to look like a bfl little single.... Cry

must say im very disappointed in ASICMiner right now... and no stratum support.... getwork.....

mchu168

full member

Activity: 188

Merit: 100

Is this like the Xbox One that was accidentally shipped before the official release?

whitefeather

member

Activity: 97

Merit: 10

Quote from: CanaryInTheMine on November 08, 2013, 05:59:03 PM

Quote from: xzempt on November 08, 2013, 05:48:58 PM

any pics of this cube thats coming? i'd like to know if i should start saving for one or just keep adding blades

if we were to have them pics, we'd post 'em...

friedcat is usually the one who posts product releases with specs and pics...

Does anyone know what these are? They sure look like the much-rumored AsicMiner Cube.

I see USB, a reset switch, ICSP (for PIC?), LAN, Power, and a return to automobile-type fuse.
Also, this thing looks like it is comprised of a main board (which has all the connectors, etc) and a series of hashing boards. Similar conceptually to the Bitfury M-Board, H-Board setup.

Edit: Pics Removed. See https://bitcointalksearch.org/topic/m.3571239 for better Images.

bitterdog

hero member

Activity: 728

Merit: 503

dApps Development Automation Platform

Quote from: xzempt on November 11, 2013, 05:56:17 PM

Quote from: bitterdog on November 11, 2013, 04:14:28 PM

PLEASE tell me these cubes are plug and play for dummys! Roast cat will really miss the boat if there isn't something easy to use for the vast majority of people getting into bitcoin mining.

Paired with that HUB those BE's as slow as they are still could have had a month or 2 in them. Had that hub come out 3-4 months ago.. MAN... He missed the boat there

That hub was money in the bank

pretty sure he has all the bitcoin in the bank he needs

He also has to answer to shareholders

xzempt

hero member

Activity: 504

Merit: 500

Quote from: bitterdog on November 11, 2013, 04:14:28 PM

PLEASE tell me these cubes are plug and play for dummys! Roast cat will really miss the boat if there isn't something easy to use for the vast majority of people getting into bitcoin mining.

Paired with that HUB those BE's as slow as they are still could have had a month or 2 in them. Had that hub come out 3-4 months ago.. MAN... He missed the boat there

That hub was money in the bank

pretty sure he has all the bitcoin in the bank he needs

bitterdog

hero member

Activity: 728

Merit: 503

dApps Development Automation Platform

PLEASE tell me these cubes are plug and play for dummys! Roast cat will really miss the boat if there isn't something easy to use for the vast majority of people getting into bitcoin mining.

Paired with that HUB those BE's as slow as they are still could have had a month or 2 in them. Had that hub come out 3-4 months ago.. MAN... He missed the boat there

That hub was money in the bank

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Just a reminder that USPS is closed today. packages are packed and will be dropped off tomorrow AM.
Thanks!

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: pixl8tr on November 11, 2013, 12:18:49 PM

Seems like the difficulty isn't climbing as high now that the USB product is gone...
I agree. Thanks Canary!

I think the diff drop is due to the Typhoon in Asia knocking out a lot of the infrastructure there.... Just a guess.

difficulty is projected to rise in ~1079 blocks by 7.4% atm (and it will likely rise more).
the large/faster the network becomes, it also becomes more resilient to outages and disruptions (not to diminish the human toll and suffering due to this disaster).
hey, is there a btc fund raiser to help the victims yet?

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: Tong on November 11, 2013, 10:31:53 AM

Quote from: CanaryInTheMine on November 09, 2013, 03:47:10 AM

Sold out of USBs... No mas!
Blades are in stock.

Two things:

What do we do if we got a stick or two that need replaced?

And can you please update your sig to a final number of Tera/petahash you've sold to the world?

Seems like the difficulty isn't climbing as high now that the USB product is gone...

contact the reseller you purchased from to determine if covered by warranty policy.

maybe later, but the measure in Th is becoming irrelevant quickly, I'll have to think about a more meaningful measure or I'm actually tempted to replace with something else.

USBs, at this point, have a negligible effect on the network speed rise, and thus difficulty. look to bitfury chip based devices and KNC products for the most recent effect. Later to follow with more ASIC products from the usual suspects.

pixl8tr

sr. member

Activity: 336

Merit: 250

[/quote]

Seems like the difficulty isn't climbing as high now that the USB product is gone...

[/quote]

I agree. Thanks Canary!

I think the diff drop is due to the Typhoon in Asia knocking out a lot of the infrastructure there.... Just a guess.

Tong

newbie

Activity: 56

Merit: 0

Quote from: CanaryInTheMine on November 09, 2013, 03:47:10 AM

Sold out of USBs... No mas!
Blades are in stock.

Two things:

What do we do if we got a stick or two that need replaced?

And can you please update your sig to a final number of Tera/petahash you've sold to the world?

Seems like the difficulty isn't climbing as high now that the USB product is gone...

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: xzempt on November 09, 2013, 10:41:25 PM

Quote from: CanaryInTheMine on November 09, 2013, 09:17:01 PM

Quote from: xzempt on November 09, 2013, 07:59:06 PM

Quote from: CanaryInTheMine on November 08, 2013, 05:59:03 PM

Quote from: xzempt on November 08, 2013, 05:48:58 PM

any pics of this cube thats coming? i'd like to know if i should start saving for one or just keep adding blades

if we were to have them pics, we'd post 'em...

friedcat is usually the one who posts product releases with specs and pics...

didnt mean to ruffle your feathers....

was just curious

There's no ruffle here!! Lol... But that's funny!

lol.... i thought you might giggle over that!

Keep up the Good Work! You are an Asset to the bitcoin community..

Thank you!!

xzempt

hero member

Activity: 504

Merit: 500

Quote from: CanaryInTheMine on November 09, 2013, 09:17:01 PM

Quote from: xzempt on November 09, 2013, 07:59:06 PM

Quote from: CanaryInTheMine on November 08, 2013, 05:59:03 PM

Quote from: xzempt on November 08, 2013, 05:48:58 PM

any pics of this cube thats coming? i'd like to know if i should start saving for one or just keep adding blades

if we were to have them pics, we'd post 'em...

friedcat is usually the one who posts product releases with specs and pics...

didnt mean to ruffle your feathers....

was just curious

There's no ruffle here!! Lol... But that's funny!

lol.... i thought you might giggle over that!

Keep up the Good Work! You are an Asset to the bitcoin community..

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: xzempt on November 09, 2013, 07:59:06 PM

Quote from: CanaryInTheMine on November 08, 2013, 05:59:03 PM

Quote from: xzempt on November 08, 2013, 05:48:58 PM

any pics of this cube thats coming? i'd like to know if i should start saving for one or just keep adding blades

if we were to have them pics, we'd post 'em...

friedcat is usually the one who posts product releases with specs and pics...

didnt mean to ruffle your feathers....

was just curious

There's no ruffle here!! Lol... But that's funny!

xzempt

hero member

Activity: 504

Merit: 500

Quote from: CanaryInTheMine on November 08, 2013, 05:59:03 PM

Quote from: xzempt on November 08, 2013, 05:48:58 PM

any pics of this cube thats coming? i'd like to know if i should start saving for one or just keep adding blades

if we were to have them pics, we'd post 'em...

friedcat is usually the one who posts product releases with specs and pics...

didnt mean to ruffle your feathers....

was just curious

MikeMike

legendary

Activity: 2254

Merit: 1020

★ Ⓚ KORE TEAM Ⓚ ★

Quote from: CanaryInTheMine on November 09, 2013, 11:23:27 AM

Going to make a quick run to USPS in 1 hr..

Please advise on host of PM's on Backplanes etc so we can get them shipped this morning.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Going to make a quick run to USPS in 1 hr..

Topic: [CLOSED] batch #32 0.65 btc per Blade, 49-port HUBS .30 or less - page 3. (Read 55837 times)