Somehow, my backyard view seems nicer 
No doubt about itBut raskul has some of the most quiet neighbors one can find
spiccioli
Topic: [Closed] Legendaries review party of Spondoolies-Tech's SP20 - page 11. (Read 19124 times)
December 13, 2014, 05:10:45 PM
But raskul has some of the most quiet neighbors one can find
spiccioli
December 13, 2014, 01:10:49 PM
Somehow, my backyard view seems nicer
No doubt about itno way, who wants a boring back garden like that lol
i'm quite happy with the view i have thank you very much.
December 13, 2014, 12:59:07 PM
Somehow, my backyard view seems nicer
No doubt about it December 13, 2014, 12:50:13 PM
I don't need to do a temp test from the window, I can SEE it lol
Somehow, my backyard view seems nicer
http://powerprice.info/SPT/IMG_0119.JPG
that fence could do with a lick of paint
December 13, 2014, 12:34:40 PM
I don't need to do a temp test from the window, I can SEE it lol
Somehow, my backyard view seems nicer
December 12, 2014, 10:18:56 AM
I don't need to do a temp test from the window, I can SEE it lol:
You live in a graveyard?
*Careful they don't mask the sound of the dead being raised.
I'll be overclocking it with two CX750's as long as it's not too noisy. Judging from the snowfall out there, the holiday season should be perfect for some mining to heat up everything.
My old friend, I am sorry in advance
A minor underclock and you should be okay to lower the 80% fan down.
Not even if I point it at the frigid air outside? It's been some time since I mined after the days of FPGA's and GPU's, so I'm not too sure what to expect here.Its a 30W fan at 100%, compared to your usual fan of ~2W. This is big boy mining now
I am not an engineer, but I would venture to say that some of the noise would be shape and placement of the holes the air is moving thru.
The fan sounds pretty much like that outside of the case as well
December 12, 2014, 08:14:33 AM
I don't need to do a temp test from the window, I can SEE it lol:
You live in a graveyard?
*Careful they don't mask the sound of the dead being raised.
I'll be overclocking it with two CX750's as long as it's not too noisy. Judging from the snowfall out there, the holiday season should be perfect for some mining to heat up everything.
My old friend, I am sorry in advance
A minor underclock and you should be okay to lower the 80% fan down. Not even if I point it at the frigid air outside? It's been some time since I mined after the days of FPGA's and GPU's, so I'm not too sure what to expect here.Its a 30W fan at 100%, compared to your usual fan of ~2W. This is big boy mining now
I am not an engineer, but I would venture to say that some of the noise would be shape and placement of the holes the air is moving thru.
December 12, 2014, 08:00:26 AM
I don't need to do a temp test from the window, I can SEE it lol:
You live in a graveyard?
*Careful they don't mask the sound of the dead being raised.
I'll be overclocking it with two CX750's as long as it's not too noisy. Judging from the snowfall out there, the holiday season should be perfect for some mining to heat up everything.
My old friend, I am sorry in advance
A minor underclock and you should be okay to lower the 80% fan down. Not even if I point it at the frigid air outside? It's been some time since I mined after the days of FPGA's and GPU's, so I'm not too sure what to expect here.Its a 30W fan at 100%, compared to your usual fan of ~2W. This is big boy mining now
December 11, 2014, 03:35:05 PM
oh fuck... I missed =(
you'll get to read the reviews though, like me
December 11, 2014, 03:33:16 PM
oh fuck... I missed =(
December 11, 2014, 03:28:15 PM
My SP10 with the correct firmware is happiest in sub 0 temps
December 11, 2014, 02:18:46 PM
interesting view...
by the way some years ago when I was looking for land I had a suggestion for a really nice land
with a big minus it was next to a graveyard.I did not like the idea off-course and turned down the offer
but today seeing the place the owner planted large trees and the graveyard cant be seen from his farm.
not like this picture off-course...
Have you seen this series Les revenants i am seeing it these days its so unpredictable like LOST
end of discusion this is a mining forum LOL...
by the way some years ago when I was looking for land I had a suggestion for a really nice land
with a big minus it was next to a graveyard.I did not like the idea off-course and turned down the offer
but today seeing the place the owner planted large trees and the graveyard cant be seen from his farm.
not like this picture off-course...
Have you seen this series Les revenants i am seeing it these days its so unpredictable like LOST
end of discusion this is a mining forum LOL...
December 11, 2014, 01:44:15 PM
I don't need to do a temp test from the window, I can SEE it lol:
You live in a graveyard?
didn't you know, i'm back from the dead.
December 11, 2014, 01:31:38 PM
I don't need to do a temp test from the window, I can SEE it lol:
You live in a graveyard?
December 11, 2014, 01:26:21 PM
I don't need to do a temp test from the window, I can SEE it lol:
You live in a graveyard?
December 11, 2014, 01:13:31 PM
I have 3 x SP10 running in a container unit and they have direct air-con pointed at the intake.
the aircon is set at 16celcius.
I have 1 xSP31 running in a garage unit, however they draw cool air from the back wall which is currently ~5celcius and intake temps are at ~11celcius
I have 1 x SP20 in the room next to the lounge in my home, pulling air directly from outside, through an open window (bugger it's cold outside) and it's running perfectly well.
that's about all i can advise really
the aircon is set at 16celcius.
I have 1 xSP31 running in a garage unit, however they draw cool air from the back wall which is currently ~5celcius and intake temps are at ~11celcius
I have 1 x SP20 in the room next to the lounge in my home, pulling air directly from outside, through an open window (bugger it's cold outside) and it's running perfectly well.
that's about all i can advise really
I'll be doing your third case here, and yea it's frigid out there. *peeks at the sub-blizzard*
I don't need to do a temp test from the window, I can SEE it lol:
December 11, 2014, 12:53:24 PM
I have 3 x SP10 running in a container unit and they have direct air-con pointed at the intake.
the aircon is set at 16celcius.
I have 1 xSP31 running in a garage unit, however they draw cool air from the back wall which is currently ~5celcius and intake temps are at ~11celcius
I have 1 x SP20 in the room next to the lounge in my home, pulling air directly from outside, through an open window (bugger it's cold outside) and it's running perfectly well.
that's about all i can advise really
the aircon is set at 16celcius.
I have 1 xSP31 running in a garage unit, however they draw cool air from the back wall which is currently ~5celcius and intake temps are at ~11celcius
I have 1 x SP20 in the room next to the lounge in my home, pulling air directly from outside, through an open window (bugger it's cold outside) and it's running perfectly well.
that's about all i can advise really
I'll be doing your third case here, and yea it's frigid out there. *peeks at the sub-blizzard*
December 11, 2014, 12:49:31 PM
I have 3 x SP10 running in a container unit and they have direct air-con pointed at the intake.
the aircon is set at 16celcius.
I have 1 xSP31 running in a garage unit, however they draw cool air from the back wall which is currently ~5celcius and intake temps are at ~11celcius
I have 1 x SP20 in the room next to the lounge in my home, pulling air directly from outside, through an open window (bugger it's cold outside) and it's running perfectly well.
that's about all i can advise really
the aircon is set at 16celcius.
I have 1 xSP31 running in a garage unit, however they draw cool air from the back wall which is currently ~5celcius and intake temps are at ~11celcius
I have 1 x SP20 in the room next to the lounge in my home, pulling air directly from outside, through an open window (bugger it's cold outside) and it's running perfectly well.
that's about all i can advise really
December 11, 2014, 12:22:44 PM
I'll be overclocking it with two CX750's as long as it's not too noisy. Judging from the snowfall out there, the holiday season should be perfect for some mining to heat up everything.
My old friend, I am sorry in advance
A minor underclock and you should be okay to lower the 80% fan down. Not even if I point it at the frigid air outside? It's been some time since I mined after the days of FPGA's and GPU's, so I'm not too sure what to expect here.Not even. It really doesnt get "bearable" for what I consider to be home noise levels (im sensitive though) till under 50-60% fan speed. It really varies from person to person, couple of my clients put them in their bedrooms at 100% speed...
I'll be overclocking it with two CX750's as long as it's not too noisy. Judging from the snowfall out there, the holiday season should be perfect for some mining to heat up everything.
My old friend, I am sorry in advance
A minor underclock and you should be okay to lower the 80% fan down. Not even if I point it at the frigid air outside? It's been some time since I mined after the days of FPGA's and GPU's, so I'm not too sure what to expect here.raskul can tip you with pointing miners towards frigid air outside
Not even. It really doesnt get "bearable" for what I consider to be home noise levels (im sensitive though) till under 50-60% fan speed. It really varies from person to person, couple of my clients put them in their bedrooms at 100% speed...
Makes you wonder what sounds are they trying to mask...
Welp, I guess I'll see how it goes next Monday.
I'm not that sensitive to white noise, although admittedly I'm planning to put them in a small room where I'll probably be working around them...
December 11, 2014, 12:10:45 PM
I'll be overclocking it with two CX750's as long as it's not too noisy. Judging from the snowfall out there, the holiday season should be perfect for some mining to heat up everything.
My old friend, I am sorry in advance
A minor underclock and you should be okay to lower the 80% fan down. Not even if I point it at the frigid air outside? It's been some time since I mined after the days of FPGA's and GPU's, so I'm not too sure what to expect here.raskul can tip you with pointing miners towards frigid air outside
Not even. It really doesnt get "bearable" for what I consider to be home noise levels (im sensitive though) till under 50-60% fan speed. It really varies from person to person, couple of my clients put them in their bedrooms at 100% speed...
Makes you wonder what sounds are they trying to mask...
Jump to: