[Closed] Legendaries review party of Spondoolies-Tech's SP20 - page 9.

John (John K.)

legendary

Activity: 1288

Merit: 1227

Away on an extended break

Quote from: spiccioli on December 15, 2014, 01:13:45 PM

Quote from: John (John K.) on December 15, 2014, 01:11:10 PM

Quote from: John (John K.) on December 15, 2014, 01:03:45 PM

Quote from: wpgdeez on December 15, 2014, 01:02:38 PM

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Quote from: Biffa on December 15, 2014, 12:42:19 PM

Quote from: John (John K.) on December 15, 2014, 12:37:36 PM

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

Tried, but it's still not showing up on the myminer.io page. I've bought a router off Amazon with 1 day shipping. Cry

John,

I work somewhere that limits access to the dhcp system via mac addresses, surely there will be logs showing the SP20 trying to connect and being rejected. Unless you don't have access to that system.

The SP20 is setup differently to other miners in that it needs DHCP to get its IP address, some others like the Bitmain kit comes with a preset IP address, which requires a different set of hoops to jump through

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Can you get to the Myminer.io page at all or page can't be found? Perhaps you have some web content filtering of proxy action happening at the perimeter.

Yes, I can get to it but the page is empty as usual. (with the title etc in tact of course)

Quote from: Syke on December 15, 2014, 01:01:43 PM

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Yes, if you hit the right IP address with a web browser it will prompt you for username/password.

Okay, I'll keep on trying!

And I give up. I'll wait till I get the router tomorrow. Cry

Without an IP assigned to it it wont' respond, you need a DHCP server running to have an IP address assigned to it.

spiccioli

I thought I got the actual MAC (probably not) of the miner by doing the wireshark trick and whitelisted it, but apparently it's not the MAC here as I couldn't connect to any of the devices on the network via a browser. Anyway, I got a router in the mail - hopefully tomorrow should work!

Thanks again for your help!

spiccioli

legendary

Activity: 1379

Merit: 1003

nec sine labore

Quote from: John (John K.) on December 15, 2014, 01:11:10 PM

Quote from: John (John K.) on December 15, 2014, 01:03:45 PM

Quote from: wpgdeez on December 15, 2014, 01:02:38 PM

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Quote from: Biffa on December 15, 2014, 12:42:19 PM

Quote from: John (John K.) on December 15, 2014, 12:37:36 PM

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

Tried, but it's still not showing up on the myminer.io page. I've bought a router off Amazon with 1 day shipping. Cry

John,

I work somewhere that limits access to the dhcp system via mac addresses, surely there will be logs showing the SP20 trying to connect and being rejected. Unless you don't have access to that system.

The SP20 is setup differently to other miners in that it needs DHCP to get its IP address, some others like the Bitmain kit comes with a preset IP address, which requires a different set of hoops to jump through

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Can you get to the Myminer.io page at all or page can't be found? Perhaps you have some web content filtering of proxy action happening at the perimeter.

Yes, I can get to it but the page is empty as usual. (with the title etc in tact of course)

Quote from: Syke on December 15, 2014, 01:01:43 PM

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Yes, if you hit the right IP address with a web browser it will prompt you for username/password.

Okay, I'll keep on trying!

And I give up. I'll wait till I get the router tomorrow. Cry

Without an IP assigned to it it wont' respond, you need a DHCP server running to have an IP address assigned to it.

spiccioli

John (John K.)

legendary

Activity: 1288

Merit: 1227

Away on an extended break

Quote from: John (John K.) on December 15, 2014, 01:03:45 PM

Quote from: wpgdeez on December 15, 2014, 01:02:38 PM

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Quote from: Biffa on December 15, 2014, 12:42:19 PM

Quote from: John (John K.) on December 15, 2014, 12:37:36 PM

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

Tried, but it's still not showing up on the myminer.io page. I've bought a router off Amazon with 1 day shipping. Cry

John,

I work somewhere that limits access to the dhcp system via mac addresses, surely there will be logs showing the SP20 trying to connect and being rejected. Unless you don't have access to that system.

The SP20 is setup differently to other miners in that it needs DHCP to get its IP address, some others like the Bitmain kit comes with a preset IP address, which requires a different set of hoops to jump through

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Can you get to the Myminer.io page at all or page can't be found? Perhaps you have some web content filtering of proxy action happening at the perimeter.

Yes, I can get to it but the page is empty as usual. (with the title etc in tact of course)

Quote from: Syke on December 15, 2014, 01:01:43 PM

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Yes, if you hit the right IP address with a web browser it will prompt you for username/password.

Okay, I'll keep on trying!

And I give up. I'll wait till I get the router tomorrow. Cry

wh00per

hero member

Activity: 572

Merit: 500

Quote from: Syke on December 15, 2014, 12:36:01 PM

LOL. I paperclipped it wrong. It was actually getting a little power, but not enough. Now it's booting up for real.

include that in your review Grin

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Zelek Uther on December 15, 2014, 01:04:09 PM

Quote from: raskul on December 15, 2014, 10:49:54 AM

Quote from: Xian01 on December 15, 2014, 10:45:42 AM

Quote from: raskul on December 15, 2014, 10:40:56 AM

get it powered up and rent it out. i'm on track to make 10BTC this week alone (8.6TH/s)

Pardon ? How does 8.6 TH/s net you 10BTC in one week ?!

some new cult has been launched and they've attached an altcoin to it. they are all going mad to rent rigs on the rental sites.

What site are you using to rent out your rig?

got some on betarigs and some on nicehash.

Zelek Uther

hero member

Activity: 700

Merit: 504

Run a Bitcoin node.

Quote from: raskul on December 15, 2014, 10:49:54 AM

Quote from: Xian01 on December 15, 2014, 10:45:42 AM

Quote from: raskul on December 15, 2014, 10:40:56 AM

get it powered up and rent it out. i'm on track to make 10BTC this week alone (8.6TH/s)

Pardon ? How does 8.6 TH/s net you 10BTC in one week ?!

some new cult has been launched and they've attached an altcoin to it. they are all going mad to rent rigs on the rental sites.

What site are you using to rent out your rig?

John (John K.)

legendary

Activity: 1288

Merit: 1227

Away on an extended break

Quote from: wpgdeez on December 15, 2014, 01:02:38 PM

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Quote from: Biffa on December 15, 2014, 12:42:19 PM

Quote from: John (John K.) on December 15, 2014, 12:37:36 PM

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

Tried, but it's still not showing up on the myminer.io page. I've bought a router off Amazon with 1 day shipping. Cry

John,

I work somewhere that limits access to the dhcp system via mac addresses, surely there will be logs showing the SP20 trying to connect and being rejected. Unless you don't have access to that system.

The SP20 is setup differently to other miners in that it needs DHCP to get its IP address, some others like the Bitmain kit comes with a preset IP address, which requires a different set of hoops to jump through

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Can you get to the Myminer.io page at all or page can't be found? Perhaps you have some web content filtering of proxy action happening at the perimeter.

Yes, I can get to it but the page is empty as usual. (with the title etc in tact of course)

Quote from: Syke on December 15, 2014, 01:01:43 PM

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Yes, if you hit the right IP address with a web browser it will prompt you for username/password.

Okay, I'll keep on trying!

wpgdeez

hero member

Activity: 728

Merit: 500

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Quote from: Biffa on December 15, 2014, 12:42:19 PM

Quote from: John (John K.) on December 15, 2014, 12:37:36 PM

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

Tried, but it's still not showing up on the myminer.io page. I've bought a router off Amazon with 1 day shipping. Cry

John,

I work somewhere that limits access to the dhcp system via mac addresses, surely there will be logs showing the SP20 trying to connect and being rejected. Unless you don't have access to that system.

The SP20 is setup differently to other miners in that it needs DHCP to get its IP address, some others like the Bitmain kit comes with a preset IP address, which requires a different set of hoops to jump through

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Can you get to the Myminer.io page at all or page can't be found? Perhaps you have some web content filtering of proxy action happening at the perimeter.

Syke

legendary

Activity: 3878

Merit: 1193

Quote from: John (John K.) on December 15, 2014, 12:54:17 PM

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Yes, if you hit the right IP address with a web browser it will prompt you for username/password.

John (John K.)

legendary

Activity: 1288

Merit: 1227

Away on an extended break

Quote from: Biffa on December 15, 2014, 12:42:19 PM

Quote from: John (John K.) on December 15, 2014, 12:37:36 PM

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

Tried, but it's still not showing up on the myminer.io page. I've bought a router off Amazon with 1 day shipping. Cry

John,

I work somewhere that limits access to the dhcp system via mac addresses, surely there will be logs showing the SP20 trying to connect and being rejected. Unless you don't have access to that system.

The SP20 is setup differently to other miners in that it needs DHCP to get its IP address, some others like the Bitmain kit comes with a preset IP address, which requires a different set of hoops to jump through

Nah, no access to that. Sad

I was wondering if it will give a login page if I manage to find its IP? I found (what I think is) its MAC address using wireshark, and have given it access to the network, but none of the IP's seem to give any access at all to the control interface. myminer.io is empty as always...

Biffa

legendary

Activity: 3234

Merit: 1221

Quote from: John (John K.) on December 15, 2014, 12:37:36 PM

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

Tried, but it's still not showing up on the myminer.io page. I've bought a router off Amazon with 1 day shipping. Cry

John,

I work somewhere that limits access to the dhcp system via mac addresses, surely there will be logs showing the SP20 trying to connect and being rejected. Unless you don't have access to that system.

The SP20 is setup differently to other miners in that it needs DHCP to get its IP address, some others like the Bitmain kit comes with a preset IP address, which requires a different set of hoops to jump through

John (John K.)

legendary

Activity: 1288

Merit: 1227

Away on an extended break

Quote from: spiccioli on December 15, 2014, 12:18:59 PM

Quote from: John (John K.) on December 15, 2014, 12:08:32 PM

Quote from: notlist3d on December 15, 2014, 11:59:54 AM

Quote from: John (John K.) on December 15, 2014, 11:49:00 AM

Quote from: spiccioli on December 15, 2014, 11:26:07 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

It is in DHCP mode, log into your ADSL router and look at DHCP clients.

spiccioli

Quote from: wpgdeez on December 15, 2014, 11:28:48 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

Plug it in then go to myminer.io it should show the device and IP there

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

If you are able to connect to it through a different network it says to far right side once connected:
Hostname
miner-xxxxxx
MAC address
xxxxxxxx
Hardware Version
SP20E Jackson
FW Version
2.5.33
CGMiner Version
cgminer4.7.0
CGMiner Status
Running
MinerGate Status
Running

*I put X on a few things to not show mine (Probley was not needed)

So if you can get to it on another network you could easily get the mac address and use it on the network you want after.

Welp, I guess I'll have to buy a router then. Is there any way I can view its MAC address by just plugging it directly to my laptop via ethernet?

well, your laptop won't give it an IP address if it is not running a DHCP server,

but maybe you can try to

ping the broadcast address of the network your laptop lives in, something like:

ping 192.168.1.255

then issue a

arp -a

which should show you the arp table and, maybe, the mac address of your miner.

Otherwise, install wireshark and with it running and capturing, connect the sp20 and power it on, it should try to find a DHCP server and you should be able to see its mac address.

spiccioli

Tried, but it's still not showing up on the myminer.io page. I've bought a router off Amazon with 1 day shipping. Cry

Syke

legendary

Activity: 3878

Merit: 1193

Quote from: Syke on December 15, 2014, 12:27:05 PM

Mine's not mining. Current firmware version: 2.5.33.

Events:

Quote

15/12 17:20:02:---- RUNNING SLOWSTART -----
15/12 17:20:02:Started!
15/12 17:20:04:Loop missing in discovery 0 (code 5)
15/12 17:20:04:Loop missing in discovery 1 (code 5)
15/12 17:20:04:Loop missing in discovery 2 (code 5)
15/12 17:20:04:Loop missing in discovery 3 (code 5)
15/12 17:20:04:FATAL: miner_gate.c:725
15/12 17:20:04:Abort
Minergate died and restarted
15/12 17:20:12:---- RUNNING SLOWSTART -----
Cgminer died and restarted
15/12 17:20:12:Started!
15/12 17:20:13:Loop missing in discovery 0 (code 5)
15/12 17:20:13:Loop missing in discovery 1 (code 5)
15/12 17:20:14:Loop missing in discovery 2 (code 5)
15/12 17:20:14:Loop missing in discovery 3 (code 5)
15/12 17:20:14:FATAL: miner_gate.c:725
15/12 17:20:14:Abort
Cgminer died and restarted
Minergate died and restarted

LOL. I paperclipped it wrong. It was actually getting a little power, but not enough. Now it's booting up for real.

Syke

legendary

Activity: 3878

Merit: 1193

Mine's not mining. Current firmware version: 2.5.33.

Events:

Quote

15/12 17:20:02:---- RUNNING SLOWSTART -----
15/12 17:20:02:Started!
15/12 17:20:04:Loop missing in discovery 0 (code 5)
15/12 17:20:04:Loop missing in discovery 1 (code 5)
15/12 17:20:04:Loop missing in discovery 2 (code 5)
15/12 17:20:04:Loop missing in discovery 3 (code 5)
15/12 17:20:04:FATAL: miner_gate.c:725
15/12 17:20:04:Abort
Minergate died and restarted
15/12 17:20:12:---- RUNNING SLOWSTART -----
Cgminer died and restarted
15/12 17:20:12:Started!
15/12 17:20:13:Loop missing in discovery 0 (code 5)
15/12 17:20:13:Loop missing in discovery 1 (code 5)
15/12 17:20:14:Loop missing in discovery 2 (code 5)
15/12 17:20:14:Loop missing in discovery 3 (code 5)
15/12 17:20:14:FATAL: miner_gate.c:725
15/12 17:20:14:Abort
Cgminer died and restarted
Minergate died and restarted

spiccioli

legendary

Activity: 1379

Merit: 1003

nec sine labore

Quote from: John (John K.) on December 15, 2014, 12:08:32 PM

Quote from: notlist3d on December 15, 2014, 11:59:54 AM

Quote from: John (John K.) on December 15, 2014, 11:49:00 AM

Quote from: spiccioli on December 15, 2014, 11:26:07 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

It is in DHCP mode, log into your ADSL router and look at DHCP clients.

spiccioli

Quote from: wpgdeez on December 15, 2014, 11:28:48 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

Plug it in then go to myminer.io it should show the device and IP there

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

If you are able to connect to it through a different network it says to far right side once connected:
Hostname
   miner-xxxxxx
MAC address
   xxxxxxxx
Hardware Version
   SP20E Jackson
FW Version
   2.5.33
CGMiner Version
   cgminer4.7.0
CGMiner Status
   Running
MinerGate Status
   Running

*I put X on a few things to not show mine (Probley was not needed)

So if you can get to it on another network you could easily get the mac address and use it on the network you want after.

Welp, I guess I'll have to buy a router then. Is there any way I can view its MAC address by just plugging it directly to my laptop via ethernet?

well, your laptop won't give it an IP address if it is not running a DHCP server,

but maybe you can try to

ping the broadcast address of the network your laptop lives in, something like:

ping 192.168.1.255

then issue a

arp -a

which should show you the arp table and, maybe, the mac address of your miner.

Otherwise, install wireshark and with it running and capturing, connect the sp20 and power it on, it should try to find a DHCP server and you should be able to see its mac address.

spiccioli

John (John K.)

legendary

Activity: 1288

Merit: 1227

Away on an extended break

Quote from: thomas_s on December 15, 2014, 12:13:24 PM

Quote from: John (John K.) on December 15, 2014, 12:08:32 PM

Quote from: notlist3d on December 15, 2014, 11:59:54 AM

Quote from: John (John K.) on December 15, 2014, 11:49:00 AM

Quote from: spiccioli on December 15, 2014, 11:26:07 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

It is in DHCP mode, log into your ADSL router and look at DHCP clients.

spiccioli

Quote from: wpgdeez on December 15, 2014, 11:28:48 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

Plug it in then go to myminer.io it should show the device and IP there

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

If you are able to connect to it through a different network it says to far right side once connected:
Hostname
miner-xxxxxx
MAC address
xxxxxxxx
Hardware Version
SP20E Jackson
FW Version
2.5.33
CGMiner Version
cgminer4.7.0
CGMiner Status
Running
MinerGate Status
Running

*I put X on a few things to not show mine (Probley was not needed)

So if you can get to it on another network you could easily get the mac address and use it on the network you want after.

Welp, I guess I'll have to buy a router then. Is there any way I can view its MAC address by just plugging it directly to my laptop via ethernet?

Give this a try using windows built in DHCP

http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/make-windows-7-act-as-a-dhcp-server/8ff345f2-99b5-4670-bb6f-32d7bb63de3c

Thanks! I'll dig through the stuff now - worst case is I get a router tomorrow.

thomas_s

hero member

Activity: 574

Merit: 500

Quote from: John (John K.) on December 15, 2014, 12:08:32 PM

Quote from: notlist3d on December 15, 2014, 11:59:54 AM

Quote from: John (John K.) on December 15, 2014, 11:49:00 AM

Quote from: spiccioli on December 15, 2014, 11:26:07 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

It is in DHCP mode, log into your ADSL router and look at DHCP clients.

spiccioli

Quote from: wpgdeez on December 15, 2014, 11:28:48 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

Plug it in then go to myminer.io it should show the device and IP there

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

If you are able to connect to it through a different network it says to far right side once connected:
Hostname
miner-xxxxxx
MAC address
xxxxxxxx
Hardware Version
SP20E Jackson
FW Version
2.5.33
CGMiner Version
cgminer4.7.0
CGMiner Status
Running
MinerGate Status
Running

*I put X on a few things to not show mine (Probley was not needed)

So if you can get to it on another network you could easily get the mac address and use it on the network you want after.

Welp, I guess I'll have to buy a router then. Is there any way I can view its MAC address by just plugging it directly to my laptop via ethernet?

Give this a try using windows built in DHCP

http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/make-windows-7-act-as-a-dhcp-server/8ff345f2-99b5-4670-bb6f-32d7bb63de3c

John (John K.)

legendary

Activity: 1288

Merit: 1227

Away on an extended break

Quote from: notlist3d on December 15, 2014, 11:59:54 AM

Quote from: John (John K.) on December 15, 2014, 11:49:00 AM

Quote from: spiccioli on December 15, 2014, 11:26:07 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

It is in DHCP mode, log into your ADSL router and look at DHCP clients.

spiccioli

Quote from: wpgdeez on December 15, 2014, 11:28:48 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

Plug it in then go to myminer.io it should show the device and IP there

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

If you are able to connect to it through a different network it says to far right side once connected:
Hostname
miner-xxxxxx
MAC address
xxxxxxxx
Hardware Version
SP20E Jackson
FW Version
2.5.33
CGMiner Version
cgminer4.7.0
CGMiner Status
Running
MinerGate Status
Running

*I put X on a few things to not show mine (Probley was not needed)

So if you can get to it on another network you could easily get the mac address and use it on the network you want after.

Welp, I guess I'll have to buy a router then. Is there any way I can view its MAC address by just plugging it directly to my laptop via ethernet?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: John (John K.) on December 15, 2014, 11:49:00 AM

Quote from: spiccioli on December 15, 2014, 11:26:07 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

It is in DHCP mode, log into your ADSL router and look at DHCP clients.

spiccioli

Quote from: wpgdeez on December 15, 2014, 11:28:48 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

Plug it in then go to myminer.io it should show the device and IP there

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

If you are able to connect to it through a different network it says to far right side once connected:
Hostname
   miner-xxxxxx
MAC address
   xxxxxxxx
Hardware Version
   SP20E Jackson
FW Version
   2.5.33
CGMiner Version
   cgminer4.7.0
CGMiner Status
   Running
MinerGate Status
   Running

*I put X on a few things to not show mine (Probley was not needed)

So if you can get to it on another network you could easily get the mac address and use it on the network you want after.

John (John K.)

legendary

Activity: 1288

Merit: 1227

Away on an extended break

Quote from: spiccioli on December 15, 2014, 11:26:07 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

It is in DHCP mode, log into your ADSL router and look at DHCP clients.

spiccioli

Quote from: wpgdeez on December 15, 2014, 11:28:48 AM

Quote from: John (John K.) on December 15, 2014, 11:21:39 AM

Got it and trying to run it now! I'm just wondering how do I check the Mac address of the device as I'm trying to add it to a network...

Plug it in then go to myminer.io it should show the device and IP there

Thanks guys, but I'm trying to connect this to a workspace network that requires me to add the MAC address of it to work, and I don't see it despite being being connected to the same network. (probably because the router rejects its connection). I tried connecting the LAN cable to my laptop directly, but I can't seem to find it either.... any ideas?

Topic: [Closed] Legendaries review party of Spondoolies-Tech's SP20 - page 9. (Read 19140 times)