Topic: [CLOSED]Minion Chip Assembly GB - page 27. (Read 77573 times)
no seems someone made a mistake and sent mine with the cooler attached
Any need some Arctic freezer rev2 coolers I have 4 for sale £10 each or all 4 for £30 plus p&p
Did you sell your board(s)?
Relevant (just for interest, not claiming anything is wrong, Martin appears to be completely transparent about this):
https://btcjam.com/listings/19219
It's an interesting proposition, and I'm tempted. Might be a better return than we'd expect from our investment in BA's equipment.
https://btcjam.com/listings/19219
Quote
Description
Hi,
I'm Martin from technobit.eu.
Recently we are producing big assembly service vs chips deal with BA minion chips. Each customer pay us with chips in order to get a mining board. So we are building about 150-200 THs mining power that will left for us from the customer payments.
We have industrial high sealing premises with more than 1.5 MW power available.
As far for all this orders Assembly service with chip payment we are not taking any payment from customers we expect to build mining farm for return.
Here we are offering all of you investment in this venture.
Our decision to use btcjam is based on our understanding that BTC economy have to be supported by doing everything in BTC.
So here we have the opportunity to do it only in BTC.
Who we are?
Technobit started an year ago with own design of Avalon 1 based mining board. Since then we made successful projects for mining boards for almost every ASIC chip that was available on the market. We had made Avalon1, Avalon2, Avalon3 , Bitfury, Bitfury rev.2, Coincraft A1, Inno A2 scrypt, BA minion based miners.
With 2 of them (Avalon2 and Coincraft A1) we were first to deliver mining boards to customers.At the moment we are working on RockerBox 28nm chip based design, that hopefully will be the base for expanding this venture.
Timline for this project :
First hash of the farm 1-Sept-2014
At the moment we are already building electrical and ventilation infrastructure in the our own industrial premises.
if you have any question or need more detail feel free to contact us @
[email protected]
Hope to see you on board
Best Martin
Hi,
I'm Martin from technobit.eu.
Recently we are producing big assembly service vs chips deal with BA minion chips. Each customer pay us with chips in order to get a mining board. So we are building about 150-200 THs mining power that will left for us from the customer payments.
We have industrial high sealing premises with more than 1.5 MW power available.
As far for all this orders Assembly service with chip payment we are not taking any payment from customers we expect to build mining farm for return.
Here we are offering all of you investment in this venture.
Our decision to use btcjam is based on our understanding that BTC economy have to be supported by doing everything in BTC.
So here we have the opportunity to do it only in BTC.
Who we are?
Technobit started an year ago with own design of Avalon 1 based mining board. Since then we made successful projects for mining boards for almost every ASIC chip that was available on the market. We had made Avalon1, Avalon2, Avalon3 , Bitfury, Bitfury rev.2, Coincraft A1, Inno A2 scrypt, BA minion based miners.
With 2 of them (Avalon2 and Coincraft A1) we were first to deliver mining boards to customers.At the moment we are working on RockerBox 28nm chip based design, that hopefully will be the base for expanding this venture.
Timline for this project :
First hash of the farm 1-Sept-2014
At the moment we are already building electrical and ventilation infrastructure in the our own industrial premises.
if you have any question or need more detail feel free to contact us @
[email protected]
Hope to see you on board
Best Martin
It's an interesting proposition, and I'm tempted. Might be a better return than we'd expect from our investment in BA's equipment.
Any need some Arctic freezer rev2 coolers I have 4 for sale £10 each or all 4 for £30 plus p&p
ok,2 weeks more then promised and we still dont know when we will get boards..where is marto?can someone tell us when shipping starts?as I see some of us already get their boards and I am still not even contacted about shipping :/ how is that possible? :/
I'm here.We have some minor HW problem and fixing it.
WE do not want to have endless RMA's later.
Just be patient, please.
You'll be contacted for shipping 24 hours in adance
I know it is frustrating , but do not forget we have to assemble and dissemble cooling on a lot of boards just to make sure it is working ok
Thank you for the understanding
Marto, can you be a little more specific about HW problem.. what is excatly the problem?
will try
I must say I did get a email of Thomas regarding the conversion, And my single board is running so finally i'm a happy miner cheers once again Bobsag3 and Marto74
can you post some pictures of that board, i would like to know how the final product looks like.
- mouting holes for the cooler.
- mounting holes for spacing bracket etc..
I must say I did get a email of Thomas regarding the conversion, And my single board is running so finally i'm a happy miner cheers once again Bobsag3 and Marto74
ps had to make an exception in my browser because the Minersource site brings up a security warning.
Further to this, http is fine.Using https gives you:
minersource.net uses an invalid security certificate. The certificate is only valid for the following names: *.myshopify.com, myshopify.com, *.shopifyadmin.com, shopifyadmin.com (Error code: ssl_error_bad_cert_domain)
Thomas never sent me a fucking email.
I triple checked every email from Minersource I received, never had an email regarding this chip conversion from Minersource, Thomas asked for the Technobit order number much later by PM here when my conversion seemed to be going nowhere and I started asking what was next. ps had to make an exception in my browser because the Minersource site brings up a security warning.
ok,2 weeks more then promised and we still dont know when we will get boards..where is marto?can someone tell us when shipping starts?as I see some of us already get their boards and I am still not even contacted about shipping :/ how is that possible? :/
I'm here.We have some minor HW problem and fixing it.
WE do not want to have endless RMA's later.
Just be patient, please.
You'll be contacted for shipping 24 hours in adance
I know it is frustrating , but do not forget we have to assemble and dissemble cooling on a lot of boards just to make sure it is working ok
Thank you for the understanding
ok,2 weeks more then promised and we still dont know when we will get boards..where is marto?can someone tell us when shipping starts?as I see some of us already get their boards and I am still not even contacted about shipping :/ how is that possible? :/
I like it.
No. I'm usually a horrible misanthropic curmudgeon.
Sidehack have you ever considered a job in diplomacy
Okay, so it looks like everything is actually already done and now just need to wait and find out when technobit will ship. Sucks that there were delays, but everything that can be done to get the ball rolling again has been done. Hopefully he went ahead and made all chips into boards and everything gets shipped quickly. Scrappy, I know you got a lot of money riding on this and I don't know who dropped the ball but I'd recommend calming down, possibly consider thanking MinerSource people for continuing to do business on your behalf despite some noted belligerence, and maybe contact Technobit customer service to inquire about order and shipping status for your boards. But please be nice when you do so.
Gentlemen, if I may.
Bobsag, Thomas, whoever. If Scrappy sent one of you his Technobit order number, and that was forwarded to marto (since it appears marto already received Scrappy's chips), how many problems would that solve and likely how long would it take before Scrappy's boards were shipped?
Is there more information required from one party or the other, in order to complete the transaction?
The order number was provided today (after asking a second time and a few choice words sent to me) and sent to Technobit to confirm the order with chips. As to when his boards will ship that is with Technobit, if they produced all the chips to boards it would be fast, if it was we will only create the boards that we have active confirmed orders for it could be delayed.Bobsag, Thomas, whoever. If Scrappy sent one of you his Technobit order number, and that was forwarded to marto (since it appears marto already received Scrappy's chips), how many problems would that solve and likely how long would it take before Scrappy's boards were shipped?
Is there more information required from one party or the other, in order to complete the transaction?
Well that's not nothing. Minersource guys, what's the next step that needs to be done to get this resolved? Do you need any more information from Scrappy than what has been so far presented?
This was provided today, all we need is the Technobit order to confirm with them that the chips are in the shipment. We do not handle payments, shipping from Technobit or Technobit support, only the help of converting a BA / MS order to chips and getting them to Technobit and in some cases reshipping from the US to the customer.The problem happens when the same email that is used to submit tickets is sent an email asking put simply "What is your order number from Technobit so we can confirm with them your chips are going to them".
Then when asked during another ticket, "We didn't get your order number can you give it to us" resistance.
Well that's not nothing. Minersource guys, what's the next step that needs to be done to get this resolved? Do you need any more information from Scrappy than what has been so far presented?
Gentlemen, if I may.
Bobsag, Thomas, whoever. If Scrappy sent one of you his Technobit order number, and that was forwarded to marto (since it appears marto already received Scrappy's chips), how many problems would that solve and likely how long would it take before Scrappy's boards were shipped?
Is there more information required from one party or the other, in order to complete the transaction?
Bobsag, Thomas, whoever. If Scrappy sent one of you his Technobit order number, and that was forwarded to marto (since it appears marto already received Scrappy's chips), how many problems would that solve and likely how long would it take before Scrappy's boards were shipped?
Is there more information required from one party or the other, in order to complete the transaction?
Granted I sent the exact info to Minersource unedited to prove i paid this order. Yet Thomas says " I did not confirm" BULLSHIT
Jump to: