Pages:
Author

Topic: [CLOSED]Minion Chip Assembly GB - page 30. (Read 77573 times)

sr. member
Activity: 285
Merit: 250
August 15, 2014, 10:39:40 PM
I wish BA was competent enough to hire someone like you to build their units. One man operation doing hundreds of builds in a matter of weeks while our million dollar Chinese operation can't figure out if they are coming or going
legendary
Activity: 910
Merit: 1000
August 15, 2014, 10:18:47 PM
I think you used the GB discount , right ?
We are doing our best here.
Yes, the GB. I know you do your best, but a date or schedule would be nice, you know where we come from (BA) and what we went through with those next week next week next week next week schedules. This is starting to feel the same if you mention a date, miss it, and don't give updates about why and what's next.
Look
We have some production back drafts, but I do not want to create a new "LCD delivery" issue.
In any case it is in our hands.
The tricky part is that each board final test have to be with cooling , otherwise the chips will be burned ,and then it have to be dissembled before shipping.
This just eats a lot of time time.
The boards are produced and tested for the last couple of days and each of you will be contacted for shipping , according to your shipping instructions.
I understand that after months of waiting any day of delay is frustrating , but in the end I think that week to 10 days delay will be top for this GB assembly.

Best Martin

Thanks Martin! I look forward to the boards. Sounds like its time to order coolers!!!
member
Activity: 94
Merit: 10
August 15, 2014, 10:08:01 AM

In fact, here is the quoted original PM that i sent to bogsag3 to get this started:

hi bobsag I have ordered an x3 straight from ba, do you handle the delivery from ba to marto in europe or do I have to contact them again?

If you want to convert your order to chips, all you need to do is send me the requested information on the OP of the group buy thread, and I take it from there.

You must PM me your Order Number [BA/MS] Email used to place the order, units ordered, total chips , Exchange Chips for assembly cost [Yes/No]

-BA xxxx
-xxxx
-(x3)x1
-100 chips
-Yes for chip exchange

Please let me know what I have to do next. I see i missed batch 1. Is it best to order the controllers separate from technobit or can everything be bundled up?

how many controllers will I need for this conversion?

I am already starting a 2nd batch. 1 controller can power up to 7 boards.
Got you added to the list.

Bobsag, is it correct that I will be getting 13 boards with my x-3 conversion? 12 boards with 4 chips and 1 board with 2 chips to make 50 chip total right?  So I will need 2 controllers?

yup you will need 2
member
Activity: 94
Merit: 10
August 15, 2014, 10:00:09 AM
PM me order ref

marto I have pmd you my ref. Nothing has changed in status on my order as well.
in order status to be changed  to accepted I have to get confirmation from miner source or BA

How do I make that happen?
Who did you get your order from? If you ordered from minersource and they never shipped out your unit you can have them switch it to chips but if it was Black Arrow you have to message them. (I am far past this point)

It was through Just BA, I saw bobsag saying a few weeks ago that he would add all peoples direct purchases with ba to this group buy request. I asked him to add me. He asked BA to change my order to chips, they asked me if it was okay to do that and send to Bulgaria. I agreed.

Now they are in Bulgaria and I have no confirmation that they are even going to be assembled with everyone elses.

Thats why i quoted this before:

Final list was just sent to them, you shouldn't have gotten it before ~3 hours ago.

BAS 584
BAS 1341
BAS 2470
BAS 1564
BAS 1341
BAS 2470

MS2514A
MS2095
MS1540

Should be it, will double check in the morning, doesnt include minersource orders

Because this list confirms that MS knows about my order and had that on their list to send to BA for x-3 to chip trade.

I dont know why I would need any other confirmation from ba when MS handled everything to this point like they said they were going to. Ive tried to pm bobsag3 and thomas_s but nothing so far.
member
Activity: 94
Merit: 10
August 14, 2014, 06:49:16 PM
PM me order ref

marto I have pmd you my ref. Nothing has changed in status on my order as well.
in order status to be changed  to accepted I have to get confirmation from miner source or BA

How do I make that happen?
hero member
Activity: 728
Merit: 500
August 14, 2014, 03:48:10 PM
PM me order ref

marto I have pmd you my ref. Nothing has changed in status on my order as well.
in order status to be changed  to accepted I have to get confirmation from miner source or BA
member
Activity: 94
Merit: 10
August 14, 2014, 03:34:13 PM
PM me order ref

marto I have pmd you my ref. Nothing has changed in status on my order as well.
member
Activity: 115
Merit: 10
“Create Your Decentralized Life”
August 14, 2014, 01:25:32 PM
My technobit order still says "Awaiting bank wire payment".

PM'd Marto74, he said he has not received notice from Miniersource that I am part of the group buy.  PM'd bobsag3 to see if he could do that for me.
sr. member
Activity: 374
Merit: 250
August 14, 2014, 10:50:01 AM
legendary
Activity: 1456
Merit: 1000
August 14, 2014, 10:05:16 AM
What technobit order still says "Awaiting bank wire payment".

Try PMing marto74 directly. You maybe a direct BA customer like me and not part of the MS chip shipment.
member
Activity: 115
Merit: 10
“Create Your Decentralized Life”
August 14, 2014, 09:52:30 AM
My technobit order still says "Awaiting bank wire payment".
full member
Activity: 128
Merit: 100
August 14, 2014, 07:15:30 AM
if someone from GB1 or GB2 is interested in complete boards,pm me-I am willing to sell couple of them. 385$ each..
hero member
Activity: 728
Merit: 500
August 14, 2014, 06:59:20 AM
I think you used the GB discount , right ?
We are doing our best here.
Yes, the GB. I know you do your best, but a date or schedule would be nice, you know where we come from (BA) and what we went through with those next week next week next week next week schedules. This is starting to feel the same if you mention a date, miss it, and don't give updates about why and what's next.
Look
We have some production back drafts, but I do not want to create a new "LCD delivery" issue.
In any case it is in our hands.
The tricky part is that each board final test have to be with cooling , otherwise the chips will be burned ,and then it have to be dissembled before shipping.
This just eats a lot of time time.
The boards are produced and tested for the last couple of days and each of you will be contacted for shipping , according to your shipping instructions.
I understand that after months of waiting any day of delay is frustrating , but in the end I think that week to 10 days delay will be top for this GB assembly.

Best Martin
hero member
Activity: 728
Merit: 500
August 14, 2014, 06:52:10 AM
PM me order ref
sr. member
Activity: 374
Merit: 250
August 14, 2014, 06:29:28 AM
Marto,

How many chips do i still have in my TB account?
sr. member
Activity: 374
Merit: 250
August 14, 2014, 06:28:22 AM
I have a lot of problems to get my second ordernr wich is in batch 2 to get converted to chips..
Im PM Bob, Thomas, David from ecointalk i even email BS but NOBODY answers.. i never got an confimation email for my B2 conversion from BA and i cannot get trough anybody!!


Bob, i pmd you serveral times i need some help on this one!!
Up
sr. member
Activity: 504
Merit: 250
August 14, 2014, 04:28:38 AM
I have to give marto credit I only had one board and it's sitting at the parcel depot waiting for me. So he will deliver most of you have a fair few boards being produced and he has a small team doing this and many other orders.
Qeu
full member
Activity: 120
Merit: 100
August 14, 2014, 04:00:28 AM
I think you used the GB discount , right ?
We are doing our best here.
Yes, the GB. I know you do your best, but a date or schedule would be nice, you know where we come from (BA) and what we went through with those next week next week next week next week schedules. This is starting to feel the same if you mention a date, miss it, and don't give updates about why and what's next.
hero member
Activity: 728
Merit: 500
August 14, 2014, 03:44:01 AM
So the GB order means some produces boards as a batch in order to keep costs as down as possible.
You might paid on 17-th , but the start is as soon the all the chips for the batch arrive here.
I think you used the GB discount , right ?
We are doing our best here.
Qeu
full member
Activity: 120
Merit: 100
August 14, 2014, 02:54:15 AM
So,
a little clearness on orders and order confirmations.
1.When using chip vs assembly payment option you place an order with technobit and choose bank wire payment.
2. The order is accepted when the chips get here and miner source confirm to me that your order ref is part of this GB deal.
All confirmed by miner source orders are "payment accepted " now


I paid with btc and got "payment accepted" since I placed the order on 17th July, any difference for those orders, I asked by using your messaging service in the order page itself. Is there any date solid for shipping batch 1 orders, now the one from last Saturday went by without any update yet?
Pages:
Jump to: