Pages:
Author

Topic: [CLOSED]Minion Chip Assembly GB - page 22. (Read 77573 times)

sr. member
Activity: 504
Merit: 250
September 04, 2014, 08:44:54 AM
Not sure but was using around £7 in power a day we have pay as you go electricity
legendary
Activity: 910
Merit: 1000
September 03, 2014, 11:43:09 PM
Glad to hear they are shipping to the US soon. I need those 3 boards with the crazy difficulty increases we have been seeing.
sr. member
Activity: 504
Merit: 250
September 03, 2014, 10:16:48 PM
Went with the artic cooler7 rev2 temps seem fine in standard did over clock to around 480ghs got hot and would not go any higher most likely BA's chips.


What we the voltage and freq settings you used to get 480GH?
1150mhz and 850mv
sr. member
Activity: 504
Merit: 250
September 03, 2014, 10:14:24 PM
Went with the artic cooler7 rev2 temps seem fine in standard did over clock to around 480ghs got hot and would not go any higher most likely BA's chips.
Hot enough to stay stable or did you take them back down?
They were stable just pulled more power than the wife was happy with.
member
Activity: 115
Merit: 10
“Create Your Decentralized Life”
September 03, 2014, 04:50:55 PM
Went with the artic cooler7 rev2 temps seem fine in standard did over clock to around 480ghs got hot and would not go any higher most likely BA's chips.

What we the voltage and freq settings you used to get 480GH?
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
September 03, 2014, 04:48:54 PM
Your welcome to have your own thread on it in the proper forum, but im keeping this thread to just about the assembly and operation of the technobit boards.
Hey i contacted [email protected] about the groupbuy coupon for the dell psu, i assume they'll be able to help with it?

Correct
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
September 03, 2014, 03:30:32 PM
Your welcome to have your own thread on it in the proper forum, but im keeping this thread to just about the assembly and operation of the technobit boards.
sr. member
Activity: 504
Merit: 250
September 03, 2014, 10:36:08 AM
Went with the artic cooler7 rev2 temps seem fine in standard did over clock to around 480ghs got hot and would not go any higher most likely BA's chips.
sr. member
Activity: 504
Merit: 250
September 03, 2014, 10:21:49 AM
Well I have had my HEX4M 3 weeks now running 504hrs non stop with out a missed beat Smiley beat that black arrow
sr. member
Activity: 374
Merit: 250
September 03, 2014, 03:02:03 AM
A few EU address sendings went out today.
WE are preparing one bigger to minesrsource in the next few days.
That is all I can tell for the moment.
WE continue to work

Thanks for the update, good to see things are still progress. I was hoping a little bit that I might have been one of the dispatched orders (SCKSRVSQF) but not yet - fingers crossed, glad you've got the problematic parts identified and resolved at least, more than BAS managed to do. Cheers.

It does make me chuckle how Black Arrow had the audacity to blame delivery-time pressure from customers for the inclusion of the sub-par spec parts on the Prospero's and subsequent threat to life and property. It would be comic if it wasn't so tragic, glad I jumped ship onto the Chip Exchange when I did, but really wish I would have never support black arrow in the first place. Lesson learnt.

Amen on the last part.
sr. member
Activity: 291
Merit: 250
Scam-Busting PSA: Beware of Black Arrow Software
September 03, 2014, 02:46:56 AM
A few EU address sendings went out today.
WE are preparing one bigger to minesrsource in the next few days.
That is all I can tell for the moment.
WE continue to work

Thanks for the update, good to see things are still progress. I was hoping a little bit that I might have been one of the dispatched orders (SCKSRVSQF) but not yet - fingers crossed, glad you've got the problematic parts identified and resolved at least, more than BAS managed to do. Cheers.

It does make me chuckle how Black Arrow had the audacity to blame delivery-time pressure from customers for the inclusion of the sub-par spec parts on the Prospero's and subsequent threat to life and property. It would be comic if it wasn't so tragic, glad I jumped ship onto the Chip Exchange when I did, but really wish I would have never supported black arrow in the first place. Lesson learnt.
sr. member
Activity: 504
Merit: 250
September 02, 2014, 11:15:46 PM
Another nail in the coffin for BA Smiley
sr. member
Activity: 407
Merit: 255
September 02, 2014, 05:55:48 PM
From ba forum


blackarrow, on 02 Sept 2014 - 5:26 PM, said:
There are 30 AMPS going through 60 pins. Each pin is rated at 2.2Amperes. I do not think the connector is the problem.
 
We agree that this is a serious concern and we are examining right now what is the best option to proceed. At this point we are no longer shipping X3 until we find the exact cause.
 
Customers that already have X3s are adviced to shut them down and wait for further instructions.

Despite the wait for the Technobit boards,  I believe this is the best solution.  Look at all the problems with the X3's . BA is putting out a crap product that catches fire. They are telling people to shut them down and they blame customers for rushing the X3 into production. Unbelievable.
full member
Activity: 238
Merit: 106
September 02, 2014, 02:23:00 PM
A few EU address sendings went out today.
WE are preparing one bigger to minesrsource in the next few days.
That is all I can tell for the moment.
WE continue to work

Awesome! Keep up the good word Marto!
hero member
Activity: 728
Merit: 500
September 02, 2014, 12:29:19 PM
A few EU address sendings went out today.
WE are preparing one bigger to minesrsource in the next few days.
That is all I can tell for the moment.
WE continue to work
full member
Activity: 238
Merit: 106
September 02, 2014, 10:23:35 AM

Update:
First sendings are to be  sent Mondayg
Did it happen? Any chance of an estimate when batch 1 will be sent out in full?

Bobsag, is your ticket system fixed yet, my last 3 messages never seemed to have reached anyone at Minersource, even the messages from Minersource to me are lost and never went out of your emailing system.


Yes, we would all like to hear some good news regarding GB Batch1 shipping of HEX4M boards.
member
Activity: 94
Merit: 10
September 02, 2014, 09:13:03 AM
Martin I would also like an update on my B2 orders.


Thank you.
sr. member
Activity: 374
Merit: 250
September 02, 2014, 01:47:07 AM
Martin,

Any update on my B2 order?
My chips should be in thenobit's hands accourding to the T&T code, but my order status is still "awaiting payment".

Qeu
full member
Activity: 120
Merit: 100
September 01, 2014, 03:12:17 PM

Update:
First sendings are to be  sent Mondayg
Did it happen? Any chance of an estimate when batch 1 will be sent out in full?

Bobsag, is your ticket system fixed yet, my last 3 messages never seemed to have reached anyone at Minersource, even the messages from Minersource to me are lost and never went out of your emailing system.
full member
Activity: 238
Merit: 106
September 01, 2014, 08:36:41 AM
How is work going?


Hopefully leaving the testing phase and shipping soon.
Pages:
Jump to: