Worker 1 Hash Rate 238.228 Gh/s
Worker 2 Hash Rate 269.533 Gh/s
Bobsage worker 1 hashrate is still not-up to the mark & also earner btc for 24 hours is still not 1.xx which it should be, I suppose we should revert to firmware 0.95 on worker 1 Jupiter only , worker 2 Jupiter is very happy on 0.97 firmware.
We are loosing out on 0.2xx ~ 0.3xxx btc due to worker 1 rather low hashrate on 0.97 firmware.
Topic: [CLOSED]R5: KnC Jupiter, BELOW-COST+Host! $78+Bonuses! Hashing, 1st payouts sent - page 7. (Read 30689 times)
October 23, 2013, 10:53:57 PM
October 23, 2013, 04:13:42 PM
If the 24 hour BTC looks low, keep in mind there's a delay on PPLNS before the BTC gets credited, so it might still be a few more hours before that doesn't include shifts where one of the units was being shipped.
Updated to your newest version, thanks to mootinator it now shows USD ROI / amount of money made in USD
Darnit, I missed adding an empty td tag. So annoying, and yet so... not urgent.
October 23, 2013, 03:58:36 PM
If the 24 hour BTC looks low, keep in mind there's a delay on PPLNS before the BTC gets credited, so it might still be a few more hours before that doesn't include shifts where one of the units was being shipped.
Updated to your newest version, thanks to mootinator it now shows USD ROI / amount of money made in USD
October 23, 2013, 02:41:00 PM
Worker 1 Hash Rate 229.523 Gh/s
Worker 2 Hash Rate 282.208 Gh/s
Worker 1 is not as happy as worker 2 on 0.97 firmware it seems but we can wait for few more hours to conform this , probably best revert to 0.95 for worker 1 Jupiter.
Worker 2 Hash Rate 282.208 Gh/s
Worker 1 is not as happy as worker 2 on 0.97 firmware it seems but we can wait for few more hours to conform this , probably best revert to 0.95 for worker 1 Jupiter.
October 23, 2013, 02:23:23 PM
If the 24 hour BTC looks low, keep in mind there's a delay on PPLNS before the BTC gets credited, so it might still be a few more hours before that doesn't include shifts where one of the units was being shipped.
October 23, 2013, 02:14:27 PM
Is there some easy way to see our hash rate?
The round pageshttp://www.dzminercoop.com/?page_id=124
^ Round 5
October 23, 2013, 02:10:08 PM
Is there some easy way to see our hash rate?
October 23, 2013, 12:13:55 PM
I think he just applied .97 to fix the flushwork problems. Don't know how they're running with it - it takes a few hours for things to settle down and stabilize.
Yeah both are running .97 smooth. October 23, 2013, 09:30:44 AM
I think he just applied .97 to fix the flushwork problems. Don't know how they're running with it - it takes a few hours for things to settle down and stabilize.
October 23, 2013, 09:26:55 AM
Hey Bobsage , KNC just release 0.97 firmware LOL , No rest for u bro 
Checking this thread for more test results on 0.97 firmware : https://bitcointalk.org/index.php?topic=306969.520;topicseen
Checking this thread for more test results on 0.97 firmware : https://bitcointalk.org/index.php?topic=306969.520;topicseen
October 23, 2013, 08:58:46 AM
Hi Bobsage,
Worker 1 hashrate seems a bit low , dont you think.
Worker 1 was hashing at 267 ~ 278 gh/s but now it is down to 240.
Is worker 1 Jupiter on 0.96.1 firmware , I think 0.95 firmware worked best so far.
I got them all running .96.1, and all 4 that I have (2 GB 1 personal 1 other) are showing 520+ Worker 1 hashrate seems a bit low , dont you think.
Worker 1 was hashing at 267 ~ 278 gh/s but now it is down to 240.
Is worker 1 Jupiter on 0.96.1 firmware , I think 0.95 firmware worked best so far.
October 22, 2013, 11:58:40 PM
Worker 1 Hash Rate 234.868 Gh/s -> 
Worker 2 Hash Rate 280.07 Gh/s ->
Worker 2 Hash Rate 280.07 Gh/s ->
October 22, 2013, 11:40:18 PM
Hi Bobsage,
Worker 1 hashrate seems a bit low , dont you think.
Worker 1 was hashing at 267 ~ 278 gh/s but now it is down to 240.
Is worker 1 Jupiter on 0.96.1 firmware , I think 0.95 firmware worked best so far.
Worker 1 hashrate seems a bit low , dont you think.
Worker 1 was hashing at 267 ~ 278 gh/s but now it is down to 240.
Is worker 1 Jupiter on 0.96.1 firmware , I think 0.95 firmware worked best so far.
October 22, 2013, 02:39:43 PM
Both miners are at my facility, and hashing away happily
Now rolling the .96.1 update out. expect no problems.
Now rolling the .96.1 update out. expect no problems.
October 22, 2013, 01:17:00 PM
Went the other way with the hashrate for a while to make up for the time at zero....
Thank you Mr. Humanly perfect
October 22, 2013, 12:33:15 PM
Went the other way with the hashrate for a while to make up for the time at zero....
October 22, 2013, 08:08:43 AM
Magic extension cord deployed...
October 21, 2013, 11:09:07 PM
WORKER 1 HASH RATE 0 Gh/s
Yup. Its currently in the mail on its way to my hosting facility. It will be back up and running tomorrow morning within 20min of UPS dropping it off. That doesn't explain why the hashrate is 0
Surely between -Redacted- and bobsag you guys coulda come up with a way to keep it up and running during transport
A very large extension cord and packed UPS's perhaps?
??C`mon I have faith in you
*Magic is expensive if it wasn't everyone would be using it
October 21, 2013, 11:01:57 PM
WORKER 1 HASH RATE 0 Gh/s
Yup. Its currently in the mail on its way to my hosting facility. It will be back up and running tomorrow morning within 20min of UPS dropping it off. That doesn't explain why the hashrate is 0
Surely between -Redacted- and bobsag you guys coulda come up with a way to keep it up and running during transport
A very large extension cord and packed UPS's perhaps?
??C`mon I have faith in you
*Magic is expensive if it wasn't everyone would be using it
October 21, 2013, 10:54:22 PM
WORKER 1 HASH RATE 0 Gh/s
Yup. Its currently in the mail on its way to my hosting facility. It will be back up and running tomorrow morning within 20min of UPS dropping it off. I too am saddened by your non-use of magic.
Jump to: