Pages:
Author

Topic: Corsair RM1000 powering 2 Antminers S3 - page 2. (Read 2520 times)

hero member
Activity: 770
Merit: 509
August 01, 2014, 07:42:35 AM
#6
I don't see a 24 PIN cable, the RM1000 only comes with 20 pins connector Huh
the first 4 pin is removable from either side look carefully

I've got an RM750 and only the 4 pins on the right side are optional (with the latch on top)
sr. member
Activity: 392
Merit: 250
August 01, 2014, 07:40:45 AM
#5
I don't see a 24 PIN cable, the RM1000 only comes with 20 pins connector Huh
the first 4 pin is removable from either side look carefully



Just follow photo  from https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970 the pin lock facing you and count from the right side
hero member
Activity: 770
Merit: 509
August 01, 2014, 07:40:29 AM
#4
I don't see a 24 PIN cable, the RM1000 only comes with 20 pins connector Huh

Should be 20+4 pin.
sr. member
Activity: 392
Merit: 250
August 01, 2014, 07:31:55 AM
#3
https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970
Setting Up the PSU (ATX Computer Power Supply)

Setting up using 8pin hole from the psu with the 8pin pciexpress cable . The cable with one end of 8pin and the other end is 6pin pice.  Get it?
hero member
Activity: 770
Merit: 509
August 01, 2014, 07:28:06 AM
#2
You need 2 pci-e (6 pin) for powering the miner (should be labeled and the only ones that fit)

For starting the psu just count the pins. It's the same as colored ones.
legendary
Activity: 1120
Merit: 1001
August 01, 2014, 07:16:48 AM
#1
Hello.I just bought a RM1000 PSU to power 2 antminers S3 but I have no ideea how to set it up.

1.I have many many cables coming with the PSU I don't know which ones to use ???which ones have to go into the PSU and which ones into the S3 ?
can someone give me some examples with screens??

2.In this tutorial https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s3-setup-hd-702653 it says I need to insert a paper clip into the green and black wires, but all my wires are black, how am i supposed to know where to insert the paperclip Huh
Pages:
Jump to: