I'm running the v2.1.0.1-60025 (build date 8-3-2017) wallet on Win10 x64. Syncing is fine until block 826560. There are 12 peers. Any reason why it can't proceed? Thanks.
I just upgraded to v2.1.0.2-60025. It now has 25 connections, but still not moving. Task Manager shows it's running with about 15% CPU.
Topic: CRAVE: Revival - page 14. (Read 54978 times)
still no payout from MN after almost 3d... 
does this below say anything to someone? masternode status:
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 9,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : "Wallet is locked."
}
does this below say anything to someone? masternode status:
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 9,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : "Wallet is locked."
}
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 1,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : ""
}
I had an issue as well with unlocked for staking only. I was forced to completely unlock the wallet. Thought it had been fixed thou. Any other people having this issue?
If so maybe we should report to the dev.
I really love this coin community and the wallet is stable as f***, very satisfied up to now!
still no payout from MN after almost 3d...
does this below say anything to someone? masternode status:
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 9,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : "Wallet is locked."
}
does this below say anything to someone? masternode status:
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 9,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : "Wallet is locked."
}
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 1,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : ""
}
Any news from the devs? will there be some releases soon?
still no payout from MN after almost 3d...
does this below say anything to someone? masternode status:
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 9,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : "Wallet is locked."
}
does this below say anything to someone? masternode status:
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 9,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : "Wallet is locked."
}
still no payout from MN after almost 3d...
does this below say anything to someone? masternode status:
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 9,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : "Wallet is locked."
}
does this below say anything to someone? masternode status:
{
"vin" : "CTxIn(COutPoint(d798080b98, 1), scriptSig=)",
"service" : "IP:PORT",
"status" : 9,
"pubKeyMasternode" : "CBMcyfeGr9pPFCWDXpeyBr8biwYNWmMQDw",
"notCapableReason" : "Wallet is locked."
}
the runaway exception
a fatal error occurred . crave can no longer continue safely and will quit
a fatal error occurred . crave can no longer continue safely and will quit
And this is right after running it for the first time? That's quite unusual, can you provide more info about your system such as Operating system version and amount of RAM, etc? I have seen this message before but only on closing the wallet. You could try backing up your wallet.dat file and reloading the blockchain from the files provided on the craveproject.com downloads page?
EDIT: Also it could mean the wallet is already running, I just had a similar message come up when I tried starting the wallet but it was already loaded.
the
runaway exception
a fatal error occurred . crave can no longer continue safely and will quit
runaway exception
a fatal error occurred . crave can no longer continue safely and will quit
hello I like ask I like download the wallet and I have problem I have download and unzip and when I start to run the wallet I have problem
Are there any error messages, or what kind of problem are you having?
hello I like ask I like download the wallet and I have problem I have download and unzip and when I start to run the wallet I have problem
dear all, i built up a masternode. I can see my node in the masternodes tab and it's running since 2 days. I didn't get a payment so far. How long do I have to wait? Just asking because I am not sure if everything is setup as expected :-). Or is there another way to check if my masternode is doing fine? thanks.
If the time in the masternode list is greater than 00:00 that's a good sign it's ok, and otherwise if you're running a remote node you can type ./craved masternode debug - if it says it's started then all is well.
BTW I started the MN though console and not through the CREATE MN option in the GUI. Maybe this is the issue...? My collateral is on the address mentioned in the GUI MN list. hmmm?
For a PIVX masternode you have to wait at least 5 days before getting a reward, I think there's a startup delay with most masternodes so it could be that, and it should be more steady after the first reward comes in.
All you need to do in reality is to generate a privkey with masternode genkey, place that in the masternode.conf on the controller, same in the node config file. Then check your masternode outputs take that txid (and its input index) and set that in your masternode.conf file (beside the privkey you've just inserted) and restart the controller and the node wallet.
Con you confirmed that you've sent 500 crave in the node addy in a single transaction?
Can you paste the content of your masternode.conf and node config file here?
You can follow the multiple node setup guide, but just make one.
thx. tried that now and setup the node through the GUI. looks ok to me so far. Time is counting up. 10m right now. But active column is equal to 0. Not good I guess...dear all, i built up a masternode. I can see my node in the masternodes tab and it's running since 2 days. I didn't get a payment so far. How long do I have to wait? Just asking because I am not sure if everything is setup as expected :-). Or is there another way to check if my masternode is doing fine? thanks.
If the time in the masternode list is greater than 00:00 that's a good sign it's ok, and otherwise if you're running a remote node you can type ./craved masternode debug - if it says it's started then all is well.
BTW I started the MN though console and not through the CREATE MN option in the GUI. Maybe this is the issue...? My collateral is on the address mentioned in the GUI MN list. hmmm?
For a PIVX masternode you have to wait at least 5 days before getting a reward, I think there's a startup delay with most masternodes so it could be that, and it should be more steady after the first reward comes in.
All you need to do in reality is to generate a privkey with masternode genkey, place that in the masternode.conf on the controller, same in the node config file. Then check your masternode outputs take that txid (and its input index) and set that in your masternode.conf file (beside the privkey you've just inserted) and restart the controller and the node wallet.
Con you confirmed that you've sent 500 crave in the node addy in a single transaction?
Can you paste the content of your masternode.conf and node config file here?
You can follow the multiple node setup guide, but just make one.
dear all, i built up a masternode. I can see my node in the masternodes tab and it's running since 2 days. I didn't get a payment so far. How long do I have to wait? Just asking because I am not sure if everything is setup as expected :-). Or is there another way to check if my masternode is doing fine? thanks.
If the time in the masternode list is greater than 00:00 that's a good sign it's ok, and otherwise if you're running a remote node you can type ./craved masternode debug - if it says it's started then all is well.
BTW I started the MN though console and not through the CREATE MN option in the GUI. Maybe this is the issue...? My collateral is on the address mentioned in the GUI MN list. hmmm?
For a PIVX masternode you have to wait at least 5 days before getting a reward, I think there's a startup delay with most masternodes so it could be that, and it should be more steady after the first reward comes in.
For a PIVX masternode you have to wait 1 day, then it pays every 1.5 days ... so you should get first payment after starting the masternode between 1 and 2.5 days!
No I had to wait longer than that, they were new PIVX nodes and it took many days for the first reward to come through.
Here is a setup doc that mentions the initial payment delay time https://forum.pivx.org/t/how-to-check-if-masternode-is-working-and-will-receive-payments/70.
My personal experience has been that Crave MNs are definitely faster starting than PIVX MNs, but there can still be a bit of a delay for the first payout. Also if a MN falls out of the reward queue for some reason it goes to the back of the line.
dear all, i built up a masternode. I can see my node in the masternodes tab and it's running since 2 days. I didn't get a payment so far. How long do I have to wait? Just asking because I am not sure if everything is setup as expected :-). Or is there another way to check if my masternode is doing fine? thanks.
If the time in the masternode list is greater than 00:00 that's a good sign it's ok, and otherwise if you're running a remote node you can type ./craved masternode debug - if it says it's started then all is well.
BTW I started the MN though console and not through the CREATE MN option in the GUI. Maybe this is the issue...? My collateral is on the address mentioned in the GUI MN list. hmmm?
For a PIVX masternode you have to wait at least 5 days before getting a reward, I think there's a startup delay with most masternodes so it could be that, and it should be more steady after the first reward comes in.
dear all, i built up a masternode. I can see my node in the masternodes tab and it's running since 2 days. I didn't get a payment so far. How long do I have to wait? Just asking because I am not sure if everything is setup as expected :-). Or is there another way to check if my masternode is doing fine? thanks.
If the time in the masternode list is greater than 00:00 that's a good sign it's ok, and otherwise if you're running a remote node you can type ./craved masternode debug - if it says it's started then all is well.
BTW I started the MN though console and not through the CREATE MN option in the GUI. Maybe this is the issue...? My collateral is on the address mentioned in the GUI MN list. hmmm?
I can not get the windows wallet to work. Help.
Need a bit more info from you to be helpful sorry, what have you done so far and where and how does it stop working? Send through any error or warning messages you get. Cheers!
I can not get the windows wallet to work. Help.
Jump to: