Nice job. All of your algos aren't profitable.. Your team is good, but not good enough in this game..
Perhaps they can score in fortnite?
...
Topic: CryptoDredge 0.27.0 — CUDA Miner - page 15. (Read 86243 times)
v0.16.1 released
Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.16.1
Happy mining!
The CryptoDredge Team 🚑
- Fix MTP issue related to many rejected shares
- Fix X16R and X16RT performance
- Remove Blake (2s), Exosis, Lbk3, Lyra2REv2, Polytimos and Skein algorithms
- Other minor fixes
Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.16.1
Happy mining!
The CryptoDredge Team 🚑
It is really easy as I said, only cost you some minutes watching carefully your system. If your system crashs, YOU have to find why. Not the community, not CD.
Install latest NVidia drivers, clean up your system, reboot.
Open Afterburner and watch carefully the clocks when the miner creates the tree. Sometimes (not everytime) the core spikes for a second above 2100-2200 MHz (depends on your card, 1070, 1080 or 1080 Ti). If your card & PSU cant handle such spikes, your miner or even your whole system will crash.
How to fix? Easy!
Clock your cards down to a point these spikes wont matter (usually a spike clock between 1950-2050). To make this easier, download the official CCminer and make your system 100% stable with -i 20. The CCminer will crash much faster with wrong clocks, so you can save time by testing things out. When done, switch back to CD and your system is 100% bulletproof stable.
Install latest NVidia drivers, clean up your system, reboot.
Open Afterburner and watch carefully the clocks when the miner creates the tree. Sometimes (not everytime) the core spikes for a second above 2100-2200 MHz (depends on your card, 1070, 1080 or 1080 Ti). If your card & PSU cant handle such spikes, your miner or even your whole system will crash.
How to fix? Easy!
Clock your cards down to a point these spikes wont matter (usually a spike clock between 1950-2050). To make this easier, download the official CCminer and make your system 100% stable with -i 20. The CCminer will crash much faster with wrong clocks, so you can save time by testing things out. When done, switch back to CD and your system is 100% bulletproof stable.
The problem is the miner itself is not showing it's crashing so there's no way to monitor it for crashes. Sure sometimes it gives an error on the miner but then I can downtick the OC there but often I have the miner showing it's still mining, but I can tell its crashed because it's the same exact hashrate total for 10mins. I look at the cards in afterburner, all GPUs sitting there with the stats that are fine. Its core is up, its heat is up, its power is being taken, but no activity at the pool. Both the miner and afterburner look like it's mining but the pool says nothing. This consistently happens.. Also the miner has a tendency to leak hashrate as time goes on even though the settings are the same. Sorry, but it's not the community that needs to figure out the prob, the miner has bugs and we can assist in pointing them out but that's the best we can do.
It is really easy as I said, only cost you some minutes watching carefully your system. If your system crashs, YOU have to find why. Not the community, not CD.
Install latest NVidia drivers, clean up your system, reboot.
Open Afterburner and watch carefully the clocks when the miner creates the tree. Sometimes (not everytime) the core spikes for a second above 2100-2200 MHz (depends on your card, 1070, 1080 or 1080 Ti). If your card & PSU cant handle such spikes, your miner or even your whole system will crash.
How to fix? Easy!
Clock your cards down to a point these spikes wont matter (usually a spike clock between 1950-2050). To make this easier, download the official CCminer and make your system 100% stable with -i 20. The CCminer will crash much faster with wrong clocks, so you can save time by testing things out. When done, switch back to CD and your system is 100% bulletproof stable.
Install latest NVidia drivers, clean up your system, reboot.
Open Afterburner and watch carefully the clocks when the miner creates the tree. Sometimes (not everytime) the core spikes for a second above 2100-2200 MHz (depends on your card, 1070, 1080 or 1080 Ti). If your card & PSU cant handle such spikes, your miner or even your whole system will crash.
How to fix? Easy!
Clock your cards down to a point these spikes wont matter (usually a spike clock between 1950-2050). To make this easier, download the official CCminer and make your system 100% stable with -i 20. The CCminer will crash much faster with wrong clocks, so you can save time by testing things out. When done, switch back to CD and your system is 100% bulletproof stable.
MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...
Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.
Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.
Sorry, not following, I have MSI Afterburner running, I've never seen afterburner spit out data on why the miner is crashing.
No Log -> Open Afterburner and check with your eyes... It is not that hard.
Not sure if this is a troll or what, the miner crashes when there is OC applied or no OC applied. There's nothing to check on Afterburner, it just displays the same shit it always displays, oc stats, and memory + core stats. I don't get why you'd comment some shit like "Oh look at the oc interface to tell you, it's simple" and then when you ask them to explain what they're talking about they say oh yea, you need to look at the interface cuz it tells you. I don't get how that's helpful..
MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...
Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.
Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.
Sorry, not following, I have MSI Afterburner running, I've never seen afterburner spit out data on why the miner is crashing.
No Log -> Open Afterburner and check with your eyes... It is not that hard.
MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...
Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.
Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.
Sorry, not following, I have MSI Afterburner running, I've never seen afterburner spit out data on why the miner is crashing.
How to view statistics through the browser? What should I register in the batch file and in the browser to view it?
MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...
Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.
Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.
to reduce the rejects, change to fix diff, d=512 or d=1024
(but CD is still unstable on 1080ti, while stable on 1070)
Rejected depends on pool, even with or without fixed diff. MintPond = 0%, 2Miners = 5%
CryptoDredge is a simple in use and highly optimized cryptocurrency mining software. It takes full advantage of modern NVIDIA graphics cards through the use of unique optimization techniques.
Is this using only the NVIDIA video cards? Any type of NVIDIA video cards will support the mining or what is the best or recommended video card will be used for mining? thanks...
Is this using only the NVIDIA video cards? Any type of NVIDIA video cards will support the mining or what is the best or recommended video card will be used for mining? thanks...
MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...
Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.
Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.
to reduce the rejects, change to fix diff, d=512 or d=1024
(but CD is still unstable on 1080ti, while stable on 1070)
MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...
Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.
Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.
MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...
How to view statistics through the browser? What should I register in the batch file and in the browser to view it?
Hi CryptoDredge,
Why your miner trying to connect here https://static.54.58.40.188.clients.your-server.de/login
on TCP port: 50443
And this IP address
188.40.58.54
Why your miner trying to connect here https://static.54.58.40.188.clients.your-server.de/login
on TCP port: 50443
And this IP address
188.40.58.54
Good question.
Hi CryptoDredge,
Why your miner trying to connect here https://static.54.58.40.188.clients.your-server.de/login
on TCP port: 50443
And this IP address
188.40.58.54
Why your miner trying to connect here https://static.54.58.40.188.clients.your-server.de/login
on TCP port: 50443
And this IP address
188.40.58.54
its the same like ccminer( this works)
......lyra2rev3 its not connecting to p2pool
Maybe wrong command line?
......lyra2rev3 its not connecting to p2pool says "not authorized"
same thing with my gtx 1070 and gtx 1070 ti rigs all hang after average of 1-2 hours. raven runs over 12 days without any reboot with overclock setting.
so mtp still not stable at all
so mtp still not stable at all
Jump to: