Topic: CryptoDredge 0.27.0 — CUDA Miner - page 16. (Read 86243 times)

This problem after update to 0.16.0 version, then start mining, everything okey and pool see my worker. But about after hour of work pool show zero hashrate, but if look to miner its work and shares accepting in progress, possible its didnt switch from fee pool. (Win 10, 1070x6, CryptoDredge 0.16.0, mintpond pool)

you must see your worker in a few minutes, usually it takes less than a minute. if not- check your config file or .bat file

CryptoDredge.exe -a mtp -o stratum+tcp://xzc.2miners.com:8080 -u zcoinwalletnumber.rig1 -p x

MTP Algo after about hour of work, miner is working, but there is no hash rate on pool. After reboot miner the same problem again.

also (IMHO) body of rig should be aluminium

when my first rig was from wood it was always crashes, freezes  , etc. BLU SCREEN ) with bug check code 0x00000113  you can see errors in BlueScreenView.exe mini-dump should be enabled in windows settings (default setting - enabled)

mine is Win 10 x64, CUDA 10, 8x gtx 1080 ti drivers Version: 417.35 (previous version worked fine, no bugs)

HOW much memory do you have in your rig ?

mine is 2x4gb dual mode

how much virtual memory ?

mine is
custom size for c:
initial size 25000 MB
maximum size 40000 MB
plus
custom size for d:
initial size 10000 MB
maximum size 15000 MB

currently allocated 40185 MB

(pagefile.sys on c: = 30909 MB , pagefile.sys on d: 10240 MB )

check chip set drivers.

what is your motherboard? name model?

what is your power supply model and how much psu is installed  in your rig?

My rig freezes in 3-5 minutes. Win 10, CUDA 10, 6x gtx 1080 ti, w/o o/c.

 djm34 1.1.10 version less hashrate, but more stable.

ALGO MTP


In this case it was overclocked +167 mhz for gpu. memory not overclocked.
power = 90%

BUT also I made tests with no overclocking, there is no relations between gpu clock and rejects -TESTED

I think that it is only problem of communicating between miner Cryptodredge and server xzc.2miners.com
 ( by the way - Cryptodredge is fast and cool - no reboots for 15 hours for now and no bugs )

[15:02:38] INFO  - GPU2 Gigabyte GTX 1080 Ti : 3525KH/s (Avr 3401KH/s) : 15.41KH/W : T=47C Fan=79%

but i think that I get this hashrate only because of low temperature  T=47C I think it is extremely low )

here what water block do
[15:00:04] INFO  - GPU1 Gigabyte GTX 1080 Ti : 3681KH/s (Avr 3585KH/s) : 14.50KH/W : T=27C  (gpu +185 mhz, mem 0, power =100%)

when temperature goes up hash rate goes down. (tested)

When summer was, and +30C behind the window, I had to go to low power 50-60 % to keep temperature 60-65C, hash rate was very lack

(by the way, just tested with no overclocking , gpu 0 mem 0 power 90% [16:04:38] INFO  - GPU2 Gigabyte GTX 1080 Ti : 3471KH/s (Avr 3399KH/s) : 15.39KH/W : T=47C Fan=79% )

I have the same experience.

Version 1.16.0 freezing PC, need to reboot manually by power.

Thanks for adding lapo, been waiting for some good miner for this coin

CryptoDredge 0.16.0 (Windows/Linux) added to https://www.minermonitoring.com/



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

He said : no overclock.
It is standard values for standards clocks with 108OTi.

In my side the new version is working fine sine the avaibility of the software : no crashe, but no hashrate increase (just one 1080Ti).

How you get this hashrate?
What clock are you using?

just right now

00:39:13] INFO  - Block height 125221 : Network difficulty 3967.44
[00:39:13] INFO  - Received new job #caae0372
[00:39:14] INFO  - GPU1: scratchpad is generated. 1.33318 sec
[00:39:14] INFO  - GPU2: scratchpad is generated. 1.335 sec
[00:39:15] INFO  - GPU0: scratchpad is generated. 1.34264 sec
[00:39:15] INFO  - GPU3: scratchpad is generated. 1.36243 sec
[00:39:19] INFO  - 43/5 Rejected : diff=0.139618
[00:39:26] INFO  - 43/6 Rejected : diff=0.109136
[00:39:38] INFO  - 43/7 Rejected : diff=0.126251
[00:39:39] INFO  - 43/8 Rejected : diff=0.205534
[00:39:41] INFO  - 43/9 Rejected : diff=0.0855291
[00:39:43] INFO  - 43/10 Rejected : diff=0.0868552
[00:39:45] INFO  - 43/11 Rejected : diff=2.439
[00:39:47] INFO  - 43/12 Rejected : diff=0.144709
[00:39:51] INFO  - 43/13 Rejected : diff=0.0819594
[00:39:54] INFO  - 43/14 Rejected : diff=0.248867
[00:39:56] INFO  - 43/15 Rejected : diff=0.082801
[00:39:59] INFO  - 43/16 Rejected : diff=0.0797819
[00:40:01] INFO  - 44/16 Accepted : diff=0.11192 : 13.16MH/s
[00:40:06] INFO  - 45/16 Accepted : diff=0.160867 : 13.16MH/s
[00:40:27] INFO  - 46/16 Accepted : diff=0.0907441 : 13.17MH/s
[00:40:32] INFO  - GPU0 Gigabyte GTX 1080 Ti : 3445KH/s (Avr 3276KH/s) : 14.71KH/W : T=50C Fan=100%
[00:40:32] INFO  - GPU1 Gigabyte GTX 1080 Ti : 3458KH/s (Avr 3276KH/s) : 14.76KH/W : T=52C Fan=100%
[00:40:32] INFO  - GPU2 Gigabyte GTX 1080 Ti : 3515KH/s (Avr 3335KH/s) : 15.02KH/W : T=47C Fan=79%
[00:40:32] INFO  - GPU3 Colorful GTX 1080 Ti : 3459KH/s (Avr 3283KH/s) : 14.15KH/W : T=54C Fan=100%

try mintpond, with d=1000
the is no reject

Version 1.16.0 6x1080ti miner still unstable.
It's crashed after hour or so.

Hi! MTP algo, xzc.2miners.com,  I got problem with high amount of rejected shares, from 15% rejecrts , up to 50% rejects sometime.

https://i.ibb.co/RywqhRG/sharerr.jpg


tested with standard gpu clocks, same sh1t

ping is okay

C:\Users\start>ping xzc.2miners.com
Pinging xzc.2miners.com [54.36.109.3] with 32 bytes of data:
Reply from 54.36.109.3: bytes=32 time=83ms TTL=47
Reply from 54.36.109.3: bytes=32 time=79ms TTL=47
Reply from 54.36.109.3: bytes=32 time=87ms TTL=47
Reply from 54.36.109.3: bytes=32 time=78ms TTL=47
Ping statistics for 54.36.109.3:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 78ms, Maximum = 87ms, Average = 81ms

please help.

back to beta, more stable on x16rt (linux version)

@ CryptoDredge team. Will you be doing/supporting ProgPOW mining?