Topic: CryptoDredge 0.27.0 — CUDA Miner - page 18. (Read 86186 times)
Any plan on adding X16rt (Veil) ?
The fastest I can get to mine XZC (MTP) on 1080ti is to run both ccminer (krnlx) & cryptodredge in // on the same card, the miners deliver 1800 & 2500 kH average, so the total is better....
I made some test with the 2 miners (cryptodredge and krnlx) working togeter.Nota : when I launched krnlx, cryptodredge was working for a long time (3000 accepted share whithout crashing).
My results :
1) it is working : the 2 miners can runs together.
2) When CD run t 3000KHS, KRNLX is runing at 200 khs
3) When KRNLX accept 1 share, CD has accepted 25 shares
Not sure the 2 miners togethers are better than CD alone.
I stopped KRNLX and CD is still runing alone.
Hope that can help you.
I was asked what settings I used:
1) run ccminer_sm61 v1.1.9 (krnlx), 1st, -i 22, d=1024
2) run cryptodredge v0.15.2 after, -i 6, d=512
I rebooted this PC this morning (w10, core i7, single 1080i, latest drivers), and I get roughly the same:
ccminer (krnlx) 1740 kH/s, 322 shares since reboot
cryptodredge 2563 kH/s average, 422 shares since reboot
core+100 mem+0 (otherwise cryptodredge fails), Power limit 85%, pill was on yesterday and is off today...
happy new year to all
The fastest I can get to mine XZC (MTP) on 1080ti is to run both ccminer (krnlx) & cryptodredge in // on the same card, the miners deliver 1800 & 2500 kH average, so the total is better....
I made some test with the 2 miners (cryptodredge and krnlx) working togeter.Nota : when I launched krnlx, cryptodredge was working for a long time (3000 accepted share whithout crashing).
My results :
1) it is working : the 2 miners can runs together, no crash for the time of my tests.
2) When CD run at 3000KHS, KRNLX is runing at 200 khs (but runing the 2 miners together didn't make any hashrate dump compared to one miner alone : CD is still at 3000 KHS).
3) When KRNLX accepted 1 share, CD had accepted 25 shares
Not sure the 2 miners together are better than CD alone.
I stopped KRNLX and CD is still runing alone.
Hope that can help you.
1080ti 2700khs 1080 is 1900khs , far from what is supposed. If 7 cards are on the miner crashes , works only with 6 for me .
win 101080 - 2.7M
1080ti - 3.3M
1080ti 2700khs 1080 is 1900khs , far from what is supposed. If 7 cards are on the miner crashes , works only with 6 for me .
What algos are people finding this miner to fastest on?
The fastest I can get to mine XZC (MTP) on 1080ti is to run both ccminer (krnlx) & cryptodredge in // on the same card, the miners deliver 1800 & 2500 kH average, so the total is better....
"NVRM: Xid" driver error is an overclock issue.
but there is no OC, and there is no such behaviour for other algos on these rigs, even for x16r
When 0.15.2 build for linux?
https://github.com/technobyl/CryptoDredge/releases/tag/v0.15.2
Linux, Linux, Linux please...
Thank you!
Code:
INFO - 48/0 Accepted : diff=1.53419e-05 : 27.47MH/s
INFO - Rejected share: Low difficulty
INFO - 48/1 Rejected : diff=1.72639e-05
INFO - 49/1 Accepted : diff=2.07823e-05 : 27.47MH/s
kernel: [ 4879.735048] show_signal_msg: 18 callbacks suppressed
kernel: [ 4879.735053] CryptoDredge[3501]: segfault at 561b8166bd60 ip 0000561b7c944cc7 sp 00007f4325ffa7a0 error 6 in CryptoDredge[561b7c76f000+16f4000]
3464 Segmentation fault (core dumped) ~/cryptodredge/CryptoDredge_0.15.2/CryptoDredge -c ~/cryptodredge/mintpondxzc.json
1100 for 1070 and 1400 for 1070ti
example: 2*1080 = 2 * 2700 = 5400 * 0.33 = 1782 diff
i am set 1800 min diff and good work
When 0.15.2 build for linux?
https://github.com/technobyl/CryptoDredge/releases/tag/v0.15.2
Linux, Linux, Linux please...
Thank you!
Code:
INFO - 48/0 Accepted : diff=1.53419e-05 : 27.47MH/s
INFO - Rejected share: Low difficulty
INFO - 48/1 Rejected : diff=1.72639e-05
INFO - 49/1 Accepted : diff=2.07823e-05 : 27.47MH/s
kernel: [ 4879.735048] show_signal_msg: 18 callbacks suppressed
kernel: [ 4879.735053] CryptoDredge[3501]: segfault at 561b8166bd60 ip 0000561b7c944cc7 sp 00007f4325ffa7a0 error 6 in CryptoDredge[561b7c76f000+16f4000]
3464 Segmentation fault (core dumped) ~/cryptodredge/CryptoDredge_0.15.2/CryptoDredge -c ~/cryptodredge/mintpondxzc.json
1100 for 1070 and 1400 for 1070ti
When 0.15.2 build for linux?
https://github.com/technobyl/CryptoDredge/releases/tag/v0.15.2
Linux, Linux, Linux please...
Thank you!
Code:
INFO - 48/0 Accepted : diff=1.53419e-05 : 27.47MH/s
INFO - Rejected share: Low difficulty
INFO - 48/1 Rejected : diff=1.72639e-05
INFO - 49/1 Accepted : diff=2.07823e-05 : 27.47MH/s
kernel: [ 4879.735048] show_signal_msg: 18 callbacks suppressed
kernel: [ 4879.735053] CryptoDredge[3501]: segfault at 561b8166bd60 ip 0000561b7c944cc7 sp 00007f4325ffa7a0 error 6 in CryptoDredge[561b7c76f000+16f4000]
3464 Segmentation fault (core dumped) ~/cryptodredge/CryptoDredge_0.15.2/CryptoDredge -c ~/cryptodredge/mintpondxzc.json
1100 for 1070 and 1400 for 1070ti
all 4 test rigs with 6x gtx 1070 basic clock hang with an windows error application not responding after average of 3-4 hours.
not happen at all at X16r or X22i
not happen at all at X16r or X22i
the new cryptodredge 0.15.2 works fine on mintpond
no errors yet
gr xms
no errors yet
gr xms
some minor issues yet:
Code:
[ 9744.202166] NVRM: GPU at PCI:0000:04:00: GPU-18b3f5b5-afe1-c43c-4554-aa9d607944e8
[ 9744.202171] NVRM: GPU Board Serial Number:
[ 9744.202175] NVRM: Xid (PCI:0000:04:00): 31, Ch 00000008, engmask 00000101, intr 10000000
[ 9758.439641] show_signal_msg: 11 callbacks suppressed
[ 9758.439646] CryptoDredge[23539]: segfault at 0 ip 000055eae92c7621 sp 00007f9266ffc800 error 6 in CryptoDredge[55eae914c000+16f4000]
Code:
[2442507.538319] NVRM: Xid (PCI:0000:02:00): 31, Ch 00000008, engmask 00000101, intr 10000000
[2442521.765129] CryptoDredge[12553]: segfault at 0 ip 0000564c292b3621 sp 00007f9f837fd800 error 6 in CryptoDredge[564c29138000+16f4000]
Code:
[1179757.302180] NVRM: GPU at PCI:0000:01:00: GPU-2c5cb30d-bdde-47d8-84ca-14075104520e
[1179757.302184] NVRM: GPU Board Serial Number:
[1179757.302188] NVRM: Xid (PCI:0000:01:00): 31, Ch 00000008, engmask 00000101, intr 10000000
[1179771.450827] CryptoDredge[27129]: segfault at 0 ip 00005592b1455621 sp 00007fae667fb800 error 6 in CryptoDredge[5592b12da000+16f4000]
Code:
[5444004.674384] NVRM: Xid (PCI:0000:04:00): 13, Graphics SM Warp Exception on (GPC 3, TPC 0): Out Of Range Address
[5444004.684579] NVRM: Xid (PCI:0000:04:00): 13, Graphics Exception: ESR 0x51c648=0xe 0x51c650=0x20 0x51c644=0xd3eff2 0x51c64c=0x17f
[5444004.697861] NVRM: Xid (PCI:0000:04:00): 43, Ch 00000008, engmask 00000101
[5444018.860023] CryptoDredge[20773]: segfault at 0 ip 000055fce32b8621 sp 00007f0330800800 error 6 in CryptoDredge[55fce313d000+16f4000]
Code:
[2079845.907302] NVRM: Xid (PCI:0000:01:00): 31, Ch 00000008, engmask 00000101, intr 10000000
[2079860.027898] CryptoDredge[32604]: segfault at 0 ip 000055c7e8010621 sp 00007f37ff7fd800 error 6 in CryptoDredge[55c7e7e95000+16f4000]
sorry to say but i have stil some crashes on my solo 1070
but on my 6x1060 6gb + 4 gb system ram NO crashes at all
gr xms
For the first time since the MTP support, CryptoDredge was crashing this night :-(.
Back to the prevous version : 0.15.1, a little bit slower but never crash.
Back to the prevous version : 0.15.1, a little bit slower but never crash.
you are lucky, for me 0.15.1 crashes on 1070 & 1080ti after 10 to 120 min
0.15.2 runs on 1070 but still crashes on 1080ti, even wo oc
latest ccminer from krnlx (v1.1.9) runs steady on both cards...
Hashrate, w10/latest drivers, mintpond:
1070: 1800 ccminer, 1850 CryptoDredge 0.15.2, +160 core +400 mem, 80%power, d=512
1080ti: 3200-3400 ccminer, 3200-3400CryptoDredge 0.15.2, +125 core +0 mem, 75%power, d=512 (hashrate vary each launch/restart.... strange)
For the first time since the MTP support, CryptoDredge was crashing this night :-(.
Back to the prevous version : 0.15.1, a little bit slower but never crash.
Back to the prevous version : 0.15.1, a little bit slower but never crash.
"NVRM: Xid" driver error is an overclock issue.
the new cryptodredge 0.15.2 works fine on mintpond
no errors yet
gr xms
no errors yet
gr xms
some minor issues yet:
Code:
[ 9744.202166] NVRM: GPU at PCI:0000:04:00: GPU-18b3f5b5-afe1-c43c-4554-aa9d607944e8
[ 9744.202171] NVRM: GPU Board Serial Number:
[ 9744.202175] NVRM: Xid (PCI:0000:04:00): 31, Ch 00000008, engmask 00000101, intr 10000000
[ 9758.439641] show_signal_msg: 11 callbacks suppressed
[ 9758.439646] CryptoDredge[23539]: segfault at 0 ip 000055eae92c7621 sp 00007f9266ffc800 error 6 in CryptoDredge[55eae914c000+16f4000]
Code:
[2442507.538319] NVRM: Xid (PCI:0000:02:00): 31, Ch 00000008, engmask 00000101, intr 10000000
[2442521.765129] CryptoDredge[12553]: segfault at 0 ip 0000564c292b3621 sp 00007f9f837fd800 error 6 in CryptoDredge[564c29138000+16f4000]
Code:
[1179757.302180] NVRM: GPU at PCI:0000:01:00: GPU-2c5cb30d-bdde-47d8-84ca-14075104520e
[1179757.302184] NVRM: GPU Board Serial Number:
[1179757.302188] NVRM: Xid (PCI:0000:01:00): 31, Ch 00000008, engmask 00000101, intr 10000000
[1179771.450827] CryptoDredge[27129]: segfault at 0 ip 00005592b1455621 sp 00007fae667fb800 error 6 in CryptoDredge[5592b12da000+16f4000]
Code:
[5444004.674384] NVRM: Xid (PCI:0000:04:00): 13, Graphics SM Warp Exception on (GPC 3, TPC 0): Out Of Range Address
[5444004.684579] NVRM: Xid (PCI:0000:04:00): 13, Graphics Exception: ESR 0x51c648=0xe 0x51c650=0x20 0x51c644=0xd3eff2 0x51c64c=0x17f
[5444004.697861] NVRM: Xid (PCI:0000:04:00): 43, Ch 00000008, engmask 00000101
[5444018.860023] CryptoDredge[20773]: segfault at 0 ip 000055fce32b8621 sp 00007f0330800800 error 6 in CryptoDredge[55fce313d000+16f4000]
Code:
[2079845.907302] NVRM: Xid (PCI:0000:01:00): 31, Ch 00000008, engmask 00000101, intr 10000000
[2079860.027898] CryptoDredge[32604]: segfault at 0 ip 000055c7e8010621 sp 00007f37ff7fd800 error 6 in CryptoDredge[55c7e7e95000+16f4000]
problem solving on the MTP protocol: set the difficulty to set manually
for the mintpond.com pool: -p xY26RJ, d = 3.5
for the mintpond.com pool: -p xY26RJ, d = 3.5
Periodically, once an hour, a huge amount of SHARE appears in the CLI window and the miner freezes.
ver 0.15.2 coda 10 win 10 2*1080 8G RAM GPU drive 416.34 MTP
log crash and dump https://yadi.sk/d/seStj67ueLw9SA
Maybe the problem is this?
ver 0.15.2 coda 10 win 10 2*1080 8G RAM GPU drive 416.34 MTP
Quote
12/31/2018 10: 24: 04.752 [017] [E] Failed to process API request (time: 531 ms): summary
Unable to read data from the transport connection: The remote host forcibly terminated an existing connection.
Unable to read data from the transport connection: The remote host forcibly terminated an existing connection.
log crash and dump https://yadi.sk/d/seStj67ueLw9SA
Maybe the problem is this?
Quote
Why does the vardiff difficulty start so high? - MTP proofs are large so they tend to use a lot of bandwidth. This can overwhelm the server and cause problems for the miner if the miner has bandwidth caps or upload speed limitations. Because of this the vardiff uses an approach where it starts from a high difficulty and searches down for an operating difficulty instead of the traditional approach which is to start low and raise the difficulty.
turn off antivirus or add the miner to exclusions list/whitelist the app.
Jump to: