Pages:
Author

Topic: [CryptoNight] CPU mining guide & coins that will get you a return - page 5. (Read 16063 times)

newbie
Activity: 80
Merit: 0
full member
Activity: 350
Merit: 113
What do you think about x11?
member
Activity: 131
Merit: 13
In the fray since 2013.
shouldn't monero have changed algorythm by now?
newbie
Activity: 1
Merit: 0
what about Digibyte ? any good to mine with CPU ?
newbie
Activity: 29
Merit: 0
WINDOWS INSTRUCTIONS FOR XMR_STAK

Download XMR-Stak from https://github.com/fireice-uk/xmr-stak/releases note this is for 64bit only

Extract to a folder of your choice, at this point there is no config file for you to change as xmr-stak will create it for you based on your system. So now run
the xmr-stak application, you'll be asked a number of questions as below :-

Currency: 'monero' or 'aeon': Enter  monero
Pool address: Enter the mining pool address and port number for example mining.pool.com:3333
Username (wallet address or pool login): Enter your wallet address
Password (mostly empty or x): Enter x
Does this pool port support TLS/SSL? Use no if unknown. (y/n): Enter n
Do you want to use nicehash on this pool? (y/n): Enter n
Do you want to use multiple pools? (y/n): Enter n

At this point XMR-Stak will start to run, please note you'll only be asked the above questions the first time you run it. There is a 2% dev donation fee for using this software

Now you'll have not one but Two config files created for you in the extracted folder.

The first "config.json" is where you can change your pool address and wallet address when you want too change pools etc (dont forget to change your wallet address is mining a different coin)
 
The second is called "cpu.json" this was created by xmr-stak based on its default settings for your own CPU, you can change these settings if you wish but there is
far too much to explain in a simple setup guide as there are far too many different CPU's out there. So have a google if you want to understand and change these settings but in
all fairness the default settings tend to work fine.



Great guide! I though you would create your own thread with it and I will link to it. Will link to this post then Smiley

Also, you can try to mine QWERTYcoin with CPU. Should give a pretty good amount of coins per day (with my 4kH GPU rig I can get 2mil +per day).
https://bitcointalksearch.org/topic/qwertycoin-safe-simple-secure-cpugpuasic-cryptonight-mobile-wallet-2881418

Thanks for the input, will look into it and add it on the first post Smiley

Great post.

However, anyone have experience mining via MAC? I would like to start with my personal computer as a learning experience before moving up in then world of mining.

If you would like to to use a MAC for mining and XMRig as your mining software, it's even simpler, you just need to use homebrew.
Just go to: http://www.brewformulas.org/Xmrig for instructions.

Please let me know if you need any help.

Hi Guys,

I'm mining in a pool of tomos and I get mutch more BTC than this altcoin, for exemple in a week Mining ETn with 120h/S I'm doing 23 ETN arround 0.77$ with tomos I'm doing more or less 2$ by week.
please check here: https://[Suspicious link removed]/whCpEy

Yes but let's say next month ETN will increase in value and your 23 ETN will be worth $20.
What you already mined and have in BTC will still be worth about $2 or maybe $4 if BTC doubles (which I doubt).


I definitely need a little help. I have homebrew set up and downloaded the TRTL wallet and everything but got stuck when setting up xmr-stak on MAC.


On a side note, everything I'm reading shuns mining on a MAC/personal computer and states that it will destroy my machine. I'm really only going to mine for a few hours a day to start and really to learn the programming aspect of it before committing to build my own miner. Is this really the case?
full member
Activity: 602
Merit: 106

Also, you can try to mine QWERTYcoin with CPU. Should give a pretty good amount of coins per day (with my 4kH GPU rig I can get 2mil +per day).
https://bitcointalksearch.org/topic/qwertycoin-safe-simple-secure-cpugpuasic-cryptonight-mobile-wallet-2881418

Thanks for the input, will look into it and add it on the first post Smiley

Nice to hear that!
Official pool https://qwertycoin.site/
sr. member
Activity: 616
Merit: 279
WINDOWS INSTRUCTIONS FOR XMR_STAK

Download XMR-Stak from https://github.com/fireice-uk/xmr-stak/releases note this is for 64bit only

Extract to a folder of your choice, at this point there is no config file for you to change as xmr-stak will create it for you based on your system. So now run
the xmr-stak application, you'll be asked a number of questions as below :-

Currency: 'monero' or 'aeon': Enter  monero
Pool address: Enter the mining pool address and port number for example mining.pool.com:3333
Username (wallet address or pool login): Enter your wallet address
Password (mostly empty or x): Enter x
Does this pool port support TLS/SSL? Use no if unknown. (y/n): Enter n
Do you want to use nicehash on this pool? (y/n): Enter n
Do you want to use multiple pools? (y/n): Enter n

At this point XMR-Stak will start to run, please note you'll only be asked the above questions the first time you run it. There is a 2% dev donation fee for using this software

Now you'll have not one but Two config files created for you in the extracted folder.

The first "config.json" is where you can change your pool address and wallet address when you want too change pools etc (dont forget to change your wallet address is mining a different coin)
 
The second is called "cpu.json" this was created by xmr-stak based on its default settings for your own CPU, you can change these settings if you wish but there is
far too much to explain in a simple setup guide as there are far too many different CPU's out there. So have a google if you want to understand and change these settings but in
all fairness the default settings tend to work fine.



Great guide! I though you would create your own thread with it and I will link to it. Will link to this post then Smiley

Also, you can try to mine QWERTYcoin with CPU. Should give a pretty good amount of coins per day (with my 4kH GPU rig I can get 2mil +per day).
https://bitcointalksearch.org/topic/qwertycoin-safe-simple-secure-cpugpuasic-cryptonight-mobile-wallet-2881418

Thanks for the input, will look into it and add it on the first post Smiley

Great post.

However, anyone have experience mining via MAC? I would like to start with my personal computer as a learning experience before moving up in then world of mining.

If you would like to to use a MAC for mining and XMRig as your mining software, it's even simpler, you just need to use homebrew.
Just go to: http://www.brewformulas.org/Xmrig for instructions.

Please let me know if you need any help.

Hi Guys,

I'm mining in a pool of tomos and I get mutch more BTC than this altcoin, for exemple in a week Mining ETn with 120h/S I'm doing 23 ETN arround 0.77$ with tomos I'm doing more or less 2$ by week.
please check here: https://goo.gl/whCpEy

Yes but let's say next month ETN will increase in value and your 23 ETN will be worth $20.
What you already mined and have in BTC will still be worth about $2 or maybe $4 if BTC doubles (which I doubt).
newbie
Activity: 209
Merit: 0
Hi Guys,

I'm mining in a pool of tomos and I get mutch more BTC than this altcoin, for exemple in a week Mining ETn with 120h/S I'm doing 23 ETN arround 0.77$ with tomos I'm doing more or less 2$ by week.
please check here: https://goo.gl/whCpEy
newbie
Activity: 29
Merit: 0
Great post.

However, anyone have experience mining via MAC? I would like to start with my personal computer as a learning experience before moving up in then world of mining.
full member
Activity: 602
Merit: 106
Also, you can try to mine QWERTYcoin with CPU. Should give a pretty good amount of coins per day (with my 4kH GPU rig I can get 2mil +per day).
https://bitcointalksearch.org/topic/qwertycoin-safe-simple-secure-cpugpuasic-cryptonight-mobile-wallet-2881418
newbie
Activity: 70
Merit: 0
I found this site a while back and its been in my bookmarks, thought it might be worth posting here as its a good
approximate reference for CPU hash rates incase your looking for a new or being gifted an old machine.

Use the search box in the CPU section and just enter your cpu.

http://monerobenchmarks.info/

newbie
Activity: 70
Merit: 0
WINDOWS INSTRUCTIONS FOR XMR_STAK

Download XMR-Stak from https://github.com/fireice-uk/xmr-stak/releases note this is for 64bit only

Extract to a folder of your choice, at this point there is no config file for you to change as xmr-stak will create it for you based on your system. So now run
the xmr-stak application, you'll be asked a number of questions as below :-

Currency: 'monero' or 'aeon': Enter  monero
Pool address: Enter the mining pool address and port number for example mining.pool.com:3333
Username (wallet address or pool login): Enter your wallet address
Password (mostly empty or x): Enter x
Does this pool port support TLS/SSL? Use no if unknown. (y/n): Enter n
Do you want to use nicehash on this pool? (y/n): Enter n
Do you want to use multiple pools? (y/n): Enter n

At this point XMR-Stak will start to run, please note you'll only be asked the above questions the first time you run it. There is a 2% dev donation fee for using this software

Now you'll have not one but Two config files created for you in the extracted folder.

The first "config.json" is where you can change your pool address and wallet address when you want too change pools etc (dont forget to change your wallet address is mining a different coin)
 
The second is called "cpu.json" this was created by xmr-stak based on its default settings for your own CPU, you can change these settings if you wish but there is
far too much to explain in a simple setup guide as there are far too many different CPU's out there. So have a google if you want to understand and change these settings but in
all fairness the default settings tend to work fine.

hero member
Activity: 756
Merit: 507
what is the best coin for cryptonight to mine now?

with all these new cryptonight asics around not quite sure there will be any coin to mine quite soon enough.
so no idea what we will be mining then, I'm sure the diff on etn and ipbc will be really high very soon  Embarrassed

newbie
Activity: 70
Merit: 0

Sure, a post with setting XMR-Stak would be good to have, I'll link to it from my thread too.



I'll get to work as soon as mate re the guide for XMR-Stak

A further update has been posted today re dinastycoin DCY, there coming thick and fast so definately a coin thats on the move

https://bitcointalksearch.org/topic/m.33024287
full member
Activity: 158
Merit: 100
profittrailer.cn
what is the best coin for cryptonight to mine now?
sr. member
Activity: 616
Merit: 279

Soz for not replying sooner @vlad230 I did a little test for you and on one of my machines that gives around 190hs on XMR-Stack i only get 165hs on XMrig, hugepages are enabled etc
so there is some difference. If you like I could do a guide for setting up XMR-Stack for the first time for you to tweak and add to you 1st post

Following on from my post about PinkStar, if you've started mining make sure you keep an eye on their thread re moving to v2 and swapping coins

Hmm, that's some difference in hash rates. I might switch to XMR-Stak as well.
Sure, a post with setting XMR-Stak would be good to have, I'll link to it from my thread too.

Thanks for the heads up! I will mention the swap on the first page of this thread, for others to also be aware of.

newbie
Activity: 70
Merit: 0
Defo make sure you keep updated on the DinastyCoin DCY thread too as updates are looking good there aswell

https://bitcointalksearch.org/topic/m.32837041
newbie
Activity: 70
Merit: 0
At the moment I've mined ITNS and DCY, then for a potentially good upcoming coin I'm mining PinkStar,
as per your 1st post at an average of 150Hs you should get around 900 PNKS per 24Hrs

https://bitcointalksearch.org/topic/ann-new-pinkstarcoin-pnks-cryptonight-cryptonote-2723196

Ok, I have added it to the main post. Smiley The current estimate says you can get 1200 tokens/day with that hash rate, even better Cheesy

This one looks interesting, I see it has some activity on BCT.

Let's hope it's going to be a winner in the long run.

As for mining Software I use XMR-Stack although I have used Xmrig but defo get better Hs with XMR-Stack, Xmrig is availble for 32bit aswell whereas XMR-Stack i'snt which maybe a advantage to some, but I guess it all depends on the PC you have and your own preference.

There is some nice GUI software but its only in Beta so is a little buggy and you may need to uninstall and reinstall to get it working ok, thats called Sumo Easy Miner, the default is setup for sumo mining but you can add in your own pools to mine other coins, if you where too mine more than one coin at a time you can select how many cores you want to use per coin which is quite cool, hope a update for it comes along soon

https://bitcointalksearch.org/topic/ann-sumo-easy-miner-01b13-the-most-intuitive-gui-miner-ever-created-2163270

What kind of hash rate difference did you see when comparing XMRig with XMR-Stak ?

Soz for not replying sooner @vlad230 I did a little test for you and on one of my machines that gives around 190hs on XMR-Stack i only get 165hs on XMrig, hugepages are enabled etc
so there is some difference. If you like I could do a guide for setting up XMR-Stack for the first time for you to tweak and add to you 1st post

Following on from my post about PinkStar, if you've started mining make sure you keep an eye on their thread re moving to v2 and swapping coins
newbie
Activity: 80
Merit: 0

Thanks for the feedback!
I mine CN coins since October with one of my rigs (4x Vega 56) and have around 7.6 KH.
If I put this number on whattomine right now (current diff) I get: 148.8 ETN Daily (so with the pool luck-factor (35%) ~ 200.9 ETN)
If I put this number on cryptunit right now I get: 297.6 ETN Daily

whattomine is quite accurate from what I get... cryptunit is way to high.

e.g. IPBC is very accurate from the values cryptunit shows and what I get.

Cheers

What is the actual amount of ETN you have been getting with your rig ? Are they 10-15% close to whattomine says it is?

Yes..around 180-190...but that difference is easily explainable with the changing diff over one day.
sr. member
Activity: 616
Merit: 279
starting mining with cpu i will follow this thread

Good to hear that Smiley Please let me know if I can help you out with something.
Pages:
Jump to: