Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 40.

Mordred80

jr. member

Activity: 70

Merit: 1

Quote from: hobbyguy242 on October 23, 2018, 07:59:06 AM

I need help in a bad way.

I cant find the IP address of the Miner. I looked at the troubleshooting on their website and some info on this thread. All I get is a flashing red light where the firmware LED is. (I have the Z1+)

You (your home network) are probably not in the same ip range as the miner.
The miner has by default a 192.168.1.xxx ip address.

If your home network is in the 10.x.x.x , 192.168.0.x or any other range, you won't be able to find the miner.

Mordred80

jr. member

Activity: 70

Merit: 1

Quote from: m3y5am on October 23, 2018, 08:01:41 AM

my version is20180926, Where i can find 20180930 or higher?

Version 20180930
https://drive.google.com/drive/folders/1Y1YXEgEnIFVnmzmD7PaTAMrVEDikTrfR

metnet

newbie

Activity: 69

Merit: 0

Quote from: Mordred80 on October 23, 2018, 07:45:17 AM

Quote from: metnet on October 23, 2018, 06:56:14 AM

Hi Mordred80,

i could not see auto_frequent variable in /var/www/html/resources/cgminer.config (that is JSON shown in interface)

would you please show them on config file. i am using 2018/30/09 version.

thanks in advance.

Hey metnet

Look, i've never tried to access the file the way you do it. So i can't tell you why you don't see the "auto_frequent" option.
What i can tell you is, that "auto_frequent" is the first option you see when you open the miner.json file.

This is how the file looks like when you export it from the miner setting page (miner.json):

{"auto_frequent":"0","frequency":"900","check_nonce_submit":"1","auto_restart_miner":"1","restart_lower_limit_hashrate_5m":"4","restart_hw_count_30s":"74","auto_stop_miner":"1",
"stop_lower_fanspeed_in":"2000","stop_lower_fanspeed_out":"2000","stop_high_temperature":"70","temperature_unit":"c","refresh_time":"60","system_timezone":"Europe\/Zurich",
"system_hostname":"dayun","system_protocol":"static","system_ip":"192.168.1.222","system_netmask":"255.255.255.0","system_gateway":"192.168.1.1","system_dns_server":"192.168.1.1",
"pools":[{"id":130,"url":"stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"},{"id":131,"url":"stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"},
{"id":132,"url":"stratum+tcp:\/\/lyra2rev2.jp.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"}],"user":{"id":15,"username":"xxxxx","password":"xxxxxxxxxx"}

thanks i see

m3y5am

newbie

Activity: 21

Merit: 0

my version is20180926, Where i can find 20180930 or higher?

Quote from: Mordred80 on October 23, 2018, 05:21:05 AM

Quote from: m3y5am on October 23, 2018, 02:17:22 AM

How to change the JSON file, what are the recommended changes?
thanks

Only do this changes after you upgraded your firmware to version 20180930 or higher.

hobbyguy242

newbie

Activity: 16

Merit: 0

I need help in a bad way.

I cant find the IP address of the Miner. I looked at the troubleshooting on their website and some info on this thread. All I get is a flashing red light where the firmware LED is. (I have the Z1+)

Mordred80

jr. member

Activity: 70

Merit: 1

Quote from: metnet on October 23, 2018, 06:56:14 AM

Hi Mordred80,

i could not see auto_frequent variable in /var/www/html/resources/cgminer.config (that is JSON shown in interface)

would you please show them on config file. i am using 2018/30/09 version.

thanks in advance.

Hey metnet

Look, i've never tried to access the file the way you do it. So i can't tell you why you don't see the "auto_frequent" option.
What i can tell you is, that "auto_frequent" is the first option you see when you open the miner.json file.

This is how the file looks like when you export it from the miner setting page (miner.json):

{"auto_frequent":"0","frequency":"900","check_nonce_submit":"1","auto_restart_miner":"1","restart_lower_limit_hashrate_5m":"4","restart_hw_count_30s":"74","auto_stop_miner":"1",
"stop_lower_fanspeed_in":"2000","stop_lower_fanspeed_out":"2000","stop_high_temperature":"70","temperature_unit":"c","refresh_time":"60","system_timezone":"Europe\/Zurich",
"system_hostname":"dayun","system_protocol":"static","system_ip":"192.168.1.222","system_netmask":"255.255.255.0","system_gateway":"192.168.1.1","system_dns_server":"192.168.1.1",
"pools":[{"id":130,"url":"stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"},{"id":131,"url":"stratum+tcp:\/\/lyra2rev2.usa.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"},
{"id":132,"url":"stratum+tcp:\/\/lyra2rev2.jp.nicehash.com:3347","username":"xxxxxxxxxx","password":"x"}],"user":{"id":15,"username":"xxxxx","password":"xxxxxxxxxx"}

metnet

newbie

Activity: 69

Merit: 0

Quote from: Mordred80 on October 23, 2018, 05:21:05 AM

Quote from: m3y5am on October 23, 2018, 02:17:22 AM

How to change the JSON file, what are the recommended changes?
thanks

You can export the config file (miner.json) from the settings page of your miner. In that file you can change the value of the frequency (MHz).
To edit the file, i use a tool called "Visual Studio Code" You don't need this tool cuz you can edit the file with the Windows Editor.
After you edited the file, you can upload it back to the miner over the Settings page -> miner reboots.

Change the value of auto_frequent from 0 to 1: "auto_frequent":"1"
Change the value of frequency from 900 to 950 or 1000: "frequency":"900" or "frequency":"1000"

Only do this changes after you upgraded your firmware to version 20180930 or higher.

Hi Mordred80,

i could not see auto_frequent variable in /var/www/html/resources/cgminer.config (that is JSON shown in interface)

would you please show them on config file. i am using 2018/30/09 version.

thanks in advance.

Mordred80

jr. member

Activity: 70

Merit: 1

Quote from: christiano88 on October 23, 2018, 05:24:36 AM

What happens if you do them before?

Not much...it just dosen't work.
The miner accepts the new settings, like a higher frequency, it shows the higher frequency on the main page of the miner, but it still mines with the default frequency of 900 MHz.

christiano88

member

Activity: 161

Merit: 10

What happens if you do them before?

Mordred80

jr. member

Activity: 70

Merit: 1

Quote from: m3y5am on October 23, 2018, 02:17:22 AM

How to change the JSON file, what are the recommended changes?
thanks

You can export the config file (miner.json) from the settings page of your miner. In that file you can change the value of the frequency (MHz).
To edit the file, i use a tool called "Visual Studio Code" You don't need this tool cuz you can edit the file with the Windows Editor.
After you edited the file, you can upload it back to the miner over the Settings page -> miner reboots.

Change the value of auto_frequent from 0 to 1: "auto_frequent":"1"
Change the value of frequency from 900 to 950 or 1000: "frequency":"900" or "frequency":"1000"

Only do this changes after you upgraded your firmware to version 20180930 or higher.

flexmeister

newbie

Activity: 21

Merit: 0

Everything went down the drain just 30 minutes after I paid for another Z1+ Roll Eyes

Mordred80

jr. member

Activity: 70

Merit: 1

About HDAC you guys are talking about...

They did a algo-swap from Lyra2Rev2 to Skunk
Source: https://hdactech.com/en/News/news.do?mode=view&articleNo=6951

Quote: The change will be applied from block number 151,880, and it will be applied on (GMT + 9) October 22, 2018.

All the guys mining there did just come "here" to us.
That's why the hashrate went up...

Just asking myself how this coin had this hashpower...anyway.
It is what it is....

m3y5am

newbie

Activity: 21

Merit: 0

I change pool to miningpoolhub , But this pool after 4 Hours died
PLS Help Sad

please tell me recommended pool and coin Huh

How to change the JSON file, what are the recommended changes?
thanks

Quote from: mattaero on October 22, 2018, 01:37:48 PM

That is strange, mine has been running for 4 days now without a single disconnect. Make sure you include #xnsub after the pool address, I find this helps.

Have you already made the JSON changes recommended earlier in the forum?

Quote from: m3y5am on October 22, 2018, 12:38:44 PM

today i set pool to prohashing , but after 30 min pool is died , and device switch to 2nd pool.
why ?
ok, new i check miningpoolhub

thanks

Quote from: mattaero on October 22, 2018, 12:13:08 PM

Try using Prohashing or miningpoolhub. $18 on nicehash is lower than I would expect, but I had a LOT of stale shares on nicehash that I don't get on prohashing. As of today because of the difficulty spike, it should be like $30-$35 per day.

Quote from: m3y5am on October 22, 2018, 11:40:23 AM

Hello
The Zig Z1 miner arrived me today
I do not know anything about configurations and pools
My device is now connected to the nichash pool
And it's getting very low ($ 18)
How can I more make a profit?
Which pool is more profitable?
Which currency to mining from which pool?

experienced Miner, Please guide me
I bought the device at the worst time, and today the profitability of the device has been very low,I only hope to see the money of the device in the coming years.

thanks

Silent_samurai

newbie

Activity: 5

Merit: 0

is this possible this situation change again and back to 50$ per day?!
and is this could be better if hash XVG?
and anybody knows how we can contact with Dayun company directly and ask them can they give us a solution ?!

mattaero

jr. member

Activity: 178

Merit: 2

Interesting... I was going by what CMC has for the supply. Either way, it is pretty big, so its not impossible thats what it was.

Quote from: yrk1957 on October 22, 2018, 06:45:55 PM

Quote from: mattaero on October 22, 2018, 06:26:00 PM

I dont think my math is wrong... $.05 per hdac and 11 billion of them... that is a over $500 million. Which would explain why it had 7 th/s. Just wish I had known about it!

Quote from: yrk1957 on October 22, 2018, 05:14:53 PM

Quote from: mattaero on October 22, 2018, 03:24:39 PM

Actually, It appears that this is the casse. They have $829,000 in volume and their market cap is $632M, it just hasn't been included yet, so it says its 1730 on CMC. Clearly I missed out on HDAC!

Mcap is about $101M, so around rank 64.

$632 would have put it in top 20.

See here https://hdactech.com/en/Resources/resource.do?mode=view#chart

yrk1957

member

Activity: 531

Merit: 29

Quote from: mattaero on October 22, 2018, 06:26:00 PM

I dont think my math is wrong... $.05 per hdac and 11 billion of them... that is a over $500 million. Which would explain why it had 7 th/s. Just wish I had known about it!

Quote from: yrk1957 on October 22, 2018, 05:14:53 PM

Quote from: mattaero on October 22, 2018, 03:24:39 PM

Actually, It appears that this is the casse. They have $829,000 in volume and their market cap is $632M, it just hasn't been included yet, so it says its 1730 on CMC. Clearly I missed out on HDAC!

Mcap is about $101M, so around rank 64.

$632 would have put it in top 20.

See here https://hdactech.com/en/Resources/resource.do?mode=view#chart

mattaero

jr. member

Activity: 178

Merit: 2

I dont think my math is wrong... $.05 per hdac and 11 billion of them... that is a over $500 million. Which would explain why it had 7 th/s. Just wish I had known about it!

Quote from: yrk1957 on October 22, 2018, 05:14:53 PM

Quote from: mattaero on October 22, 2018, 03:24:39 PM

Actually, It appears that this is the casse. They have $829,000 in volume and their market cap is $632M, it just hasn't been included yet, so it says its 1730 on CMC. Clearly I missed out on HDAC!

Mcap is about $101M, so around rank 64.

$632 would have put it in top 20.

Fqviii

newbie

Activity: 3

Merit: 0

HDAC has been around longer than the Z1's, so perhaps GPU's made up the bulk of the hashing power since it's relatively unknown to the Z1 owners on here? When I mined with my 1080ti Lyra2rev2 wasn't the most profitable algo in 2018 so maybe we will see a redirecting of that hashing power elsewhere. Otherwise it looks like an ROI will be difficult for myself with the Z1 with the Vertcoin fork in Q1 2019.

yrk1957

member

Activity: 531

Merit: 29

Quote from: mattaero on October 22, 2018, 03:24:39 PM

Actually, It appears that this is the casse. They have $829,000 in volume and their market cap is $632M, it just hasn't been included yet, so it says its 1730 on CMC. Clearly I missed out on HDAC!

Mcap is about $101M, so around rank 64.

$632 would have put it in top 20.

flexmeister

newbie

Activity: 21

Merit: 0

makes sense. so 8Th/s went from HDAC onto other lyra2rev2 coins, somehow none of us knew about this HDAC coin until now. fml

Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 40. (Read 42511 times)