I had not heard about this.
Ok, that explains a lot of it.
Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 50. (Read 42532 times)
Damn, that sucks.
I had not heard about this.
Ok, that explains a lot of it.
I had not heard about this.
Ok, that explains a lot of it.
I suspect due to reputation issues, many people were upset with how they handled the RR-200/210 release and the fact that they secretly mined for nearly 8 months before "launching" the product. Same with the fact that they still only manufacture 28nm chips, they are very clearly looking to make a quick profit. It is too bad really, as their builds are of good quality.
If anybody has a Z1 or Z1+ can you please try to access /phpbash.php or /webroot/phpbash.php - there may be an unauthenticated backdoor in the latest firmware.
If anybody has a Z1 or Z1+ can you please try to access /phpbash.php or /webroot/phpbash.php - there may be an unauthenticated backdoor in the latest firmware.
I just can't figure out why they are ditching the old Pinidea name and come up with this new Dayun name.
Does anyone know who's behind the Dayun mining company? It seems quite secretive with very little information available online.
I've heard rumours them being the Pinidea company (www.pinidea.io) with new name?
But I haven't been able to confirm this.
There is no doubt, the firmware is nearly identical to RR-210 complete with FPGA programming tools. There is even a copy of the RR-210's bitstream. Also, check /etc/config.cfg:
Quote
password = "admin";
hostname = "pinidea";
frq = 800;
fan = 1;
asic = 50;
hostname = "pinidea";
frq = 800;
fan = 1;
asic = 50;
Disassembly of the miner binary also hints that they may have ASICs for lyra2z and neoscrypt that have yet to be publicly released. We will see
Shouldn't this miner restart if a hashboard stops working? I randomly get this, and using any frequency above 800 makes this happen, and auto restart miner is set at 5ghz, but it doesn't restart it. I am on 926 firmware, what is wrong?
hi
are your device work probably?
Shouldn't this miner restart if a hashboard stops working? I randomly get this, and using any frequency above 800 makes this happen, and auto restart miner is set at 5ghz, but it doesn't restart it. I am on 926 firmware, what is wrong?
I had tested the 0930 firmware working perfect in my Z1，the temperature bug had been fixed in this version. this version can auto detect Z1 & Z1+,set 900 for Z1 925 for Z1+.
But when you export JSON file，the default frequency is 925 for Z1，I think it is a new bug in this version.
But when you export JSON file，the default frequency is 925 for Z1，I think it is a new bug in this version.
Are you getting any better consistency in speed?
I will note that over a couple days the speed on nicehash leveled out pretty good
New version have a better looking, also can let you check your miner temperature when you overclocking it.
I had tested the 0930 firmware working perfect in my Z1，the temperature bug had been fixed in this version. this version can auto detect Z1 & Z1+,set 900 for Z1 925 for Z1+.
But when you export JSON file，the default frequency is 925 for Z1，I think it is a new bug in this version.
But when you export JSON file，the default frequency is 925 for Z1，I think it is a new bug in this version.
hey glfrank
can you or someone else tell me how you updated the firmware?
i downloadet the file (z1_static_100_09_30_release_overclocking.img - 4GB) and then i used a Image-To-USB-Tool to burn it on the usb stick.
But my miner dosen't boot with this firmware.
At least i was smart enough not to use the original usb stick.
So i could just switch the sticks ad my miner works again.
But i really would like to know how i can do it...thx.
Anyone has working Z1+ stable?
Recommendation of pools - multicoin or mine coin direct?
Recommendation of pools - multicoin or mine coin direct?
My recommendation is nicehash because it is stable and easy. I used miningpoolhub for a while, and it worked fine too. However, I am having pretty good success with Prohashing with my Z9 minis, so I may test it out too...
Anyone has working Z1+ stable?
Recommendation of pools - multicoin or mine coin direct?
Recommendation of pools - multicoin or mine coin direct?
hi
i am amir from iran
nice to meet u all
was considering buying a Zig Z1 and i noticed in a thread that the few person in here dosent Satisfied from z1. Would you recommend i buy it or no ?
thx
i am amir from iran
nice to meet u all
was considering buying a Zig Z1 and i noticed in a thread that the few person in here dosent Satisfied from z1. Would you recommend i buy it or no ?
thx
Unless you can get it for a pretty good price, I'd probably say you are nearing the end of profitability unless you have very low electricity.
thx from your reply my frind i have free power electric . but my problem only that is that device(z1) work probably or no. are this device have eror in hardware or software??
tried the new image file, but my miner can not boot with it.
So i am going back to 14 september image file.
Hopefully that will solve my problem
*edit* Going back to 20180914 core update solved my problems. Miner up and running again. But with firmware update 20180926.
So i am going back to 14 september image file.
Hopefully that will solve my problem
*edit* Going back to 20180914 core update solved my problems. Miner up and running again. But with firmware update 20180926.
I have tried the old upgrade for the Z1 and its running fine now. But this time i bought a new Z1+ found the same company has got both Z1 and Z1+ upgrade available on the website. If anyone wish to get your Z1+ firmware update https://www.cryptominerbros.com/dayun-zig-z1-plus-firmware-update-guide
Thy for the link...was searching for something like that.
I tried it yesterday and i think i did it exactly like that but it didn't work for me.
I'll try it again after work.
This link is new, I have check this new one published today.
Now i know that something went wrong yesterday.
The file i downloaded yesterday was 4GB. But this file is only 480MB...so i think i got the wrong file.
I have tried the old upgrade for the Z1 and its running fine now. But this time i bought a new Z1+ found the same company has got both Z1 and Z1+ upgrade available on the website. If anyone wish to get your Z1+ firmware update https://www.cryptominerbros.com/dayun-zig-z1-plus-firmware-update-guide
Thy for the link...was searching for something like that.
I tried it yesterday and i think i did it exactly like that but it didn't work for me.
I'll try it again after work.
I looked at your images after some tweaking, and setting the auto frequency to "1" with the 1000 mhz definitely did appear to make it much more stable... how often are you having to restart?
Usually after 24-48h, usually...
But yesterday more or less all 30-40 mins and i don't know why.
What helped in the end, was to reload the same .json file and plug the miner off for 20 mins.
Fortunately he's stable again. Mining since more or less 12h without problems.
Hello, can someone help me overclock the ZIG Z1 to make a change to the 1100 Frequency in miner.json?
Please leave me a photo if you can, because I do not know English
Please leave me a photo if you can, because I do not know English
I had tested the 0930 firmware working perfect in my Z1，the temperature bug had been fixed in this version. this version can auto detect Z1 & Z1+,set 900 for Z1 925 for Z1+.
But when you export JSON file，the default frequency is 925 for Z1，I think it is a new bug in this version.
But when you export JSON file，the default frequency is 925 for Z1，I think it is a new bug in this version.
hey glfrank
can you or someone else tell me how you updated the firmware?
i downloadet the file (z1_static_100_09_30_release_overclocking.img - 4GB) and then i used a Image-To-USB-Tool to burn it on the usb stick.
But my miner dosen't boot with this firmware.
At least i was smart enough not to use the original usb stick.
So i could just switch the sticks ad my miner works again.
But i really would like to know how i can do it...thx.
hi
i am amir from iran
nice to meet u all
was considering buying a Zig Z1 and i noticed in a thread that the few person in here dosent Satisfied from z1. Would you recommend i buy it or no ?
thx
i am amir from iran
nice to meet u all
was considering buying a Zig Z1 and i noticed in a thread that the few person in here dosent Satisfied from z1. Would you recommend i buy it or no ?
thx
Unless you can get it for a pretty good price, I'd probably say you are nearing the end of profitability unless you have very low electricity.
hi
i am amir from iran
nice to meet u all
was considering buying a Zig Z1 and i noticed in a thread that the few person in here dosent Satisfied from z1. Would you recommend i buy it or no ?
thx
i am amir from iran
nice to meet u all
was considering buying a Zig Z1 and i noticed in a thread that the few person in here dosent Satisfied from z1. Would you recommend i buy it or no ?
thx
Jump to: