dcr.suprnova.cc - Suprnova's Decred Pool - page 3.

bjornbsmith

newbie

Activity: 2

Merit: 0

Quote from: ocminer on January 30, 2018, 11:10:33 AM

Unconfirmed payments don't get included into Credit_PPS payments, only the last Credit_PPS + all confirmed coins up to that date. Unconfirmed get summed up later.

Basically those Credit_PPS payments are just a cumulative Credit which sums up all the small Credits into one bigger chunk.

Awesome - thanks for explaining :-)

I don't know if there is a FAQ on the pool, but it would be great to have something like this on a FAQ linked from the transactions page.

ocminer

legendary

Activity: 2688

Merit: 1240

Unconfirmed payments don't get included into Credit_PPS payments, only the last Credit_PPS + all confirmed coins up to that date. Unconfirmed get summed up later.

Basically those Credit_PPS payments are just a cumulative Credit which sums up all the small Credits into one bigger chunk.

bjornbsmith

newbie

Activity: 2

Merit: 0

Hi I'm rather new to the pool and cannot understand my transactions list.

Looking at my transactions list I found transactions of type Credit_PPS, which i googled and understand is an aggregation of previous transactions into one single transaction.

Working with numbers daily, I naturally tried to add up the numbers to see if they were aggregated correctly and either I am not understanding it correctly or something is wrong.

if you look at the transactions snipped in the screenshot:
https://gyazo.com/9c7902e70ecead2b3978ce05d95571ae

I have added the numbers together from transaction: 10911073689-10911325752 and I would expect them to sum up to the value of transaction: 10911377657

But when I sum them up I get a different number: 0.02128829

Calculations screen shot from excel:

https://gyazo.com/f78fc3a2c72735b71d735c066c959538

Which amounts to almost 1.6%

Please let me know where something is wrong, either I am wrong in understanding that Credit_PPS is an aggregation of all transactions since last Credit_PPS, or the calculations is wrong, either by doing rounding so its not the numbers being show that is used or I dont understand how its calculated.

Anyone who can enlighten me?

Thanks

ocminer

legendary

Activity: 2688

Merit: 1240

There was a big DDoS a few moments ago, its fixed now

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: ocminer on January 27, 2018, 09:00:48 AM

Quote from: Ursul0 on January 27, 2018, 08:56:43 AM

@ocminer
can you please provide some details on the pool behavior in cases of frequent reconnects from the miner.
It seems that pool sometimes rejects(temporarily bans?) connections if initiated too often.

The pool, or rather the load balancers max connections are currently maxing out sometimes so you won't get back into the pool once you've stopped the miner. I'm working on extending the limit by adding another stratum url.

Lol. So that brings me to the proxy that we were discussing(and you have investigated) a while ago and my comments on easing the loads on the servers, by removing the overhead traffic and open connections and doing some "consolidation"/whatever work on the proxy side

EDIT: Thx for the info. now it's clearer

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: Ursul0 on January 27, 2018, 08:56:43 AM

@ocminer
can you please provide some details on the pool behavior in cases of frequent reconnects from the miner.
It seems that pool sometimes rejects(temporarily bans?) connections if initiated too often.

The pool, or rather the load balancers max connections are currently maxing out sometimes so you won't get back into the pool once you've stopped the miner. I'm working on extending the limit by adding another stratum url.

Ursul0

sr. member

Activity: 857

Merit: 262

@ocminer
can you please provide some details on the pool behavior in cases of frequent reconnects from the miner.
It seems that pool sometimes rejects(temporarily bans?) connections if initiated too often.

oleg.dvd

newbie

Activity: 1

Merit: 0

Looks like pool not showing statictics on Dashboard.
I mining eth+dcr with Claymore. Client received tasks, found blocks, but no statictic and no balance at all

What i do wrong?

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0x0873AaD0480357A24Be6f78a9FfB5dB1fbbf29Ba -epsw x -dpool dcr.suprnova.cc:3252 -dwal ethpoollogin.work1 -dpsw 1111111 -allpools 1

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: TunerDude007 on December 12, 2017, 09:34:37 PM

I've tried multiple different pools and different miners and still getting rejected shares... Does no one else have this problem? Is everyone mining decred no problem?

I was doing some improvements yesterday and stumbled upon some weird issue : for some reason on one of my rigs with 12 GPUs I had different "-dcri" values in claymore(10.2) for different GPUs...(like that -dcri 23,23,23,23,23,20,23...)
So it was kind of fine until I increased mem clock to 2050 from 2000 (on most of the cards) and then it started to produce almost exclusively junk - the rejected rate was over 50%, pool was dropping connection, while ETH was doing just fine.
Replacing the dcri config with a single "-dcri 26" fixed the problem. Although I'm still not 100% sure what was the problem:)

also my default 23 was apparently too low as well.
the one at the top is optimized and doing well (exactly the same HW)

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: Air Jordan on December 13, 2017, 07:48:17 AM

I have problem with worker names. I tried to rearrange the list, by renaming workers first without luck. In the end I deleted all workers, yet when I try to add one of the previous workers I get error Worker already exists, as if it is still in the database. Any ideas?

PM me the names and i'll delete them for you

Air Jordan

member

Activity: 121

Merit: 10

I have problem with worker names. I tried to rearrange the list, by renaming workers first without luck. In the end I deleted all workers, yet when I try to add one of the previous workers I get error Worker already exists, as if it is still in the database. Any ideas?

buzzercrash

newbie

Activity: 2

Merit: 0

Quote from: TunerDude007 on December 12, 2017, 09:34:37 PM

I've tried multiple different pools and different miners and still getting rejected shares... Does no one else have this problem? Is everyone mining decred no problem?

my efficiency was about 90% for a bit, now back up to 95%
so not flawless but within a certain margin i think

TunerDude007

sr. member

Activity: 465

Merit: 252

I've tried multiple different pools and different miners and still getting rejected shares... Does no one else have this problem? Is everyone mining decred no problem?

dlezama

member

Activity: 140

Merit: 17

Quote from: ocminer on December 12, 2017, 05:30:30 PM

The pool is at maximum capacity at the moment

Thanks for stopping by and answering

Probably Nicehash's debacle had something to do with that, maybe when/if they come back it will go back to lower levels, or maybe people stay and you'll need to expand Wink

ocminer

legendary

Activity: 2688

Merit: 1240

The pool is at maximum capacity at the moment

dlezama

member

Activity: 140

Merit: 17

Quote from: RandirVithren on December 11, 2017, 12:27:01 PM

after 24h there is still an error:

DCR: Stratum - Cannot connect to dcr.suprnova.cc:3252
DCR: Stratum - Failed to connect, retry in 20 sec...

what can i do?

One of my miners is going through the same, while the other ones connected without issues. I hope this gets solved soon.

TunerDude007

sr. member

Activity: 465

Merit: 252

Quote from: Ursul0 on December 07, 2017, 12:30:59 PM

Quote from: ocminer on December 07, 2017, 09:20:23 AM

What issues have you got ?

it's a wide range there can you maybe whitelist for me, same nick

probably due to global ddos. switched location, now better
where is it coming from mostly btw?

nforce nl lol:)

EDIT2: and more

Same issues here... Over 24 hours now

RandirVithren

newbie

Activity: 2

Merit: 0

after 24h there is still an error:

DCR: Stratum - Cannot connect to dcr.suprnova.cc:3252
DCR: Stratum - Failed to connect, retry in 20 sec...

what can i do?

dlezama

member

Activity: 140

Merit: 17

Quote from: RandirVithren on December 10, 2017, 05:18:32 PM

Hey

I'd like to dual mining with claymore at suprnova.
But it doesnt work:

DCR: Stratum - Cannot connect to dcr.suprnova.cc:3252
DCR: Stratum - Failed to connect, retry in 20 sec...

here is my start.bat:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ethdcrminer64.exe -epool eth.suprnova.cc:5005 -ewal myname.w1 -epsw mypw1 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal myname.w2 -dpsw mypw2 -allpools 1 -allcoins 1 -dcoin dcr

What am I doing wrong?

Thx!!!

Sometimes it happens for a while and then it connects. Give it a few minutes.

RandirVithren

newbie

Activity: 2

Merit: 0

Hey

I'd like to dual mining with claymore at suprnova.
But it doesnt work:

DCR: Stratum - Cannot connect to dcr.suprnova.cc:3252
DCR: Stratum - Failed to connect, retry in 20 sec...

here is my start.bat:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ethdcrminer64.exe -epool eth.suprnova.cc:5005 -ewal myname.w1 -epsw mypw1 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal myname.w2 -dpsw mypw2 -allpools 1 -allcoins 1 -dcoin dcr

What am I doing wrong?

Thx!!!

Topic: dcr.suprnova.cc - Suprnova's Decred Pool - page 3. (Read 27594 times)