Pages:
Author

Topic: dcr.suprnova.cc - Suprnova's Decred Pool - page 6. (Read 27611 times)

member
Activity: 92
Merit: 10
September 08, 2017, 10:00:58 AM
I receive a little payment. I configure that for try the pool.

Set to 0.5 decred automatic payment.

I receive 0.15745046 DCR. So, 90% of fees? NICE.

I've already replied to you via email already but it seems you didn't get it..

The pool won't pay if your balance is below the threshold (that's why it's called threshold).. so something is obviously wrong on your side

How will I set the payout in suprnova.cc? If I need to transfer the decred for withdraw.

Go to "Edit Account" - enter a payout address there and click the "Cash out" button on the bottom of the screen

says i have 0.51 dcr , can i cash out the full amount to my wallet ? Smiley tks


He just told you how to do it  Huh
legendary
Activity: 2688
Merit: 1240
September 08, 2017, 12:23:24 AM
I receive a little payment. I configure that for try the pool.

Set to 0.5 decred automatic payment.

I receive 0.15745046 DCR. So, 90% of fees? NICE.

I've already replied to you via email already but it seems you didn't get it..

The pool won't pay if your balance is below the threshold (that's why it's called threshold).. so something is obviously wrong on your side

How will I set the payout in suprnova.cc? If I need to transfer the decred for withdraw.

Go to "Edit Account" - enter a payout address there and click the "Cash out" button on the bottom of the screen
newbie
Activity: 1
Merit: 0
September 07, 2017, 08:27:38 PM
I receive a little payment. I configure that for try the pool.

Set to 0.5 decred automatic payment.

I receive 0.15745046 DCR. So, 90% of fees? NICE.

I've already replied to you via email already but it seems you didn't get it..

The pool won't pay if your balance is below the threshold (that's why it's called threshold).. so something is obviously wrong on your side

How will I set the payout in suprnova.cc? If I need to transfer the decred for withdraw.
newbie
Activity: 1
Merit: 0
August 27, 2017, 02:53:44 PM
hi,

Im trying to mine decred using amd rx480's. I tried cg miner, and sg miner. niether worked. does anyone have any advice on to mine decred (not dual mine)?
member
Activity: 92
Merit: 10
August 16, 2017, 04:51:59 PM
@ocminer.

Another unlock request please.
Please see your PM. Any way to avoid this in the future? Seems to get locked often.
 Roll Eyes

Check https://unlock.suprnova.cc

And I've added some extra capacity yesterday so ccminer should work fine

Thanks! All good now  Cool
legendary
Activity: 2688
Merit: 1240
August 16, 2017, 04:09:10 PM
@ocminer how about that proxy project of yours, any progress?

still on it.. It's not so easy because it's no standard stratum, but i'm working on it and will let you know when it's finished ASAP
sr. member
Activity: 857
Merit: 262
August 16, 2017, 04:08:22 PM
@ocminer how about that proxy project of yours, any progress?
legendary
Activity: 2688
Merit: 1240
August 16, 2017, 07:44:43 AM
@ocminer.

Another unlock request please.
Please see your PM. Any way to avoid this in the future? Seems to get locked often.
 Roll Eyes

Check https://unlock.suprnova.cc

And I've added some extra capacity yesterday so ccminer should work fine
full member
Activity: 434
Merit: 107
August 16, 2017, 07:40:39 AM
@ocminer.

Another unlock request please.
Please see your PM. Any way to avoid this in the future? Seems to get locked often.
 Roll Eyes
member
Activity: 92
Merit: 10
August 12, 2017, 04:55:28 PM
For some reason ccminer has been doing this for a couple days now.  I can dual mine on this pc using the same pool/worker.... All my mining rigs would just fine on the same network.  I have tried a different worker and v2.0 / v2.1.  Any ideas?  (win10 fw is off)

[2017-08-12 17:47:30] Starting on stratum+tcp://dcr.suprnova.cc:3252
[2017-08-12 17:47:30] NVML GPU monitoring enabled.
[2017-08-12 17:47:30] NVAPI GPU monitoring enabled.
[2017-08-12 17:47:30] 1 miner thread started, using 'decred' algorithm.
[2017-08-12 17:47:49] stratum_subscribe timed out
[2017-08-12 17:47:49] ...retry after 30 seconds
[2017-08-12 17:48:38] stratum_subscribe timed out
[2017-08-12 17:48:38] ...retry after 30 seconds
[2017-08-12 17:49:29] Stratum connection failed: Failed to connect to dcr.suprnova.cc port 3252: Timed out
[2017-08-12 17:49:29] ...retry after 30 seconds
[2017-08-12 17:50:18] stratum_subscribe timed out
[2017-08-12 17:50:18] ...retry after 30 seconds
[2017-08-12 17:51:08] stratum_subscribe timed out
[2017-08-12 17:51:08] ...retry after 30 seconds
[2017-08-12 17:51:59] Stratum connection failed: Failed to connect to dcr.suprnova.cc port 3252: Timed out
[2017-08-12 17:51:59] ...retry after 30 seconds
[2017-08-12 17:52:42] stratum_subscribe timed out
[2017-08-12 17:52:42] ...retry after 30 seconds
legendary
Activity: 2688
Merit: 1240
August 01, 2017, 04:38:32 PM
@ocminer

Does Suprnova have any affiliation with decredpool.org? I see that their link is mentioned on Suprnova site and the design is pretty much the same. I'm asking since I see that the earnings over there are significantly lower that I would expect based on WhatToMine. Also on the other hand I see that the pool is down sometimes multiple times a day. Are you in the position to help with decredpool.org also or not so much?

Many thanks in advance

Edit:Typo

Nope, they just bought my code, that's all

That actually smells fishy. Why would you "buy" a mining pool code just to setup a 0% fee pool.

At the time they bought it, it wasn't expensive and I didn't had the feeling there's something fishy. Just drop them a mail or so if you're having trouble with them

Unfortunately they are not so great on responsiveness. I have tried to email them multiple times and there was no answer. But hey, what is the level of SLA you expect from a 0% pool. Anyhow it is off topic here so thanks for all the fish, I think I'm moving to your pool as soon as I hit the payout threshold.

Maybe write them a PM at the decred forums.. they contacted me there for the first time as well, I don't think they're active here. Emails often go into junk, I have that problem as well as many miners use fake names / addresses
newbie
Activity: 14
Merit: 0
August 01, 2017, 04:36:06 PM
@ocminer

Does Suprnova have any affiliation with decredpool.org? I see that their link is mentioned on Suprnova site and the design is pretty much the same. I'm asking since I see that the earnings over there are significantly lower that I would expect based on WhatToMine. Also on the other hand I see that the pool is down sometimes multiple times a day. Are you in the position to help with decredpool.org also or not so much?

Many thanks in advance

Edit:Typo

Nope, they just bought my code, that's all

That actually smells fishy. Why would you "buy" a mining pool code just to setup a 0% fee pool.

At the time they bought it, it wasn't expensive and I didn't had the feeling there's something fishy. Just drop them a mail or so if you're having trouble with them

Unfortunately they are not so great on responsiveness. I have tried to email them multiple times and there was no answer. But hey, what is the level of SLA you expect from a 0% pool. Anyhow it is off topic here so thanks for all the fish, I think I'm moving to your pool as soon as I hit the payout threshold.
newbie
Activity: 49
Merit: 0
August 01, 2017, 11:24:27 AM
Hello
I'm new here..

Best Pool for mining?

I am using  dcr.suprnova.cc:3252
sr. member
Activity: 857
Merit: 262
August 01, 2017, 06:35:28 AM
... I'm still on it, maybe I can iron out the last issues on the weekend, i'm having some issues with the python stuff but hope I can figure it out

This is really good to hear. Stratum for DCR would be very useful.
I'm also very much impressed by your 'responsiveness' - you're an outstanding member of the community!
Can I vote somewhere for you or something Smiley  
legendary
Activity: 2688
Merit: 1240
August 01, 2017, 02:10:19 AM
@ocminer
Is it possible that you missed my question or you've just changed your mind on the issue? ...or whatever

Hmm weird.. I've got an ancient version ..

I'll try it again tonight and let you know.. But maybe it's more simple to just adapt a python proxy to the stratum stuff.. I'll have a look.

Please let me know if dcr proxy working with your pool is something that you can make available.

Oh sorry I missed the question, I'm still on it, maybe I can iron out the last issues on the weekend, i'm having some issues with the python stuff but hope I can figure it out
sr. member
Activity: 857
Merit: 262
August 01, 2017, 02:09:12 AM
@ocminer
Is it possible that you missed my question or you've just changed your mind on the issue? ...or whatever

Hmm weird.. I've got an ancient version ..

I'll try it again tonight and let you know.. But maybe it's more simple to just adapt a python proxy to the stratum stuff.. I'll have a look.

Please let me know if dcr proxy working with your pool is something that you can make available.
legendary
Activity: 2688
Merit: 1240
You don't follow me.

I setup to 0.5. I mine 0.5 with my workers. When I receive the payment I don't receive 0.5, I just receive 0.15, so.. 0.35 of fees.

That's the problem.

Thats impossible and a ridiculous high fee Smiley

Check your Transactions, you have a "Credit" and a "Debit" Transaction in "Edit Account" -> "Transactions" - you can see every amount there.

I assume you probably did a manual payment instead of a automatic and therefore simply withdrew before you hit the 0.5 threshold. Some people misinterpret unconfirmed and confirmed coins.. round estimates etc
newbie
Activity: 10
Merit: 0
You don't follow me.

I setup to 0.5. I mine 0.5 with my workers. When I receive the payment I don't receive 0.5, I just receive 0.15, so.. 0.35 of fees.

That's the problem.
legendary
Activity: 2688
Merit: 1240
I receive a little payment. I configure that for try the pool.

Set to 0.5 decred automatic payment.

I receive 0.15745046 DCR. So, 90% of fees? NICE.

I've already replied to you via email already but it seems you didn't get it..

The pool won't pay if your balance is below the threshold (that's why it's called threshold).. so something is obviously wrong on your side
newbie
Activity: 10
Merit: 0
I receive a little payment. I configure that for try the pool.

Set to 0.5 decred automatic payment.

I receive 0.15745046 DCR. So, 90% of fees? NICE.
Pages:
Jump to: