Sorry for the support question - but I have four workers running now, only 3 are shown on the dashboard as if the 4th does not exist. It's communicating with the pool no problem, shares accepted, etc.
I have 8 workers set up in my account, (only 4 operating right now) and on the worker page only 3 are showing as orange, and with "active" flag. Any ideas? They are all using the same Claymore configuration...
Topic: dcr.suprnova.cc - Suprnova's Decred Pool - page 8. (Read 27611 times)
I got 8 cards that do 950mh/s each and i got huge fluctuations on the account information on the website.
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Leave the dashboard open a bit - it should stabilize after 10-15 minutes - the graph should get more flat.
You can also try to specify static diff. Set the diff so that you submit one share about every 10-15 sec.
After all, hashrate itself doesn't count so much, it's the accumulated difficulty of your shares / block which makes the payout, so don't give too much attention to fliuctuations, they're more or less normal.
How can i specify static diff? Sorry i am new to the game
Use the password Field for your miner.
d=16 as password for example sets a static diff of 16
I didnt quite get that, can you be more specific ?
I got 2 workers now, because my main rig is running 7 cards and the other is running 1 card, until my m.2 to pcie gets here.
You launch your miner with something similar like this:
ccminer -o stratum+tcp://dcr.surpnova.cc:3252 -u myusername.myworkername -p x
Now you'd start it with:
ccminer -o stratum+tcp://dcr.surpnova.cc:3252 -u myusername.myworkername -p d=16
to get a static diff of 16
Hey, thanks for helping. Do i have to change the password on your website for the miner as well or leave it like it is ? I am using claymore to dual mine, not ccminer. So in the password field instead of x, i use d=16 right?
Should i make it more than 16 or is it ok ?
Should i do it for both miners or only the strong one ?
You can leave the password on the pool like it is - no problem.
Make it so, that claymore submits one share every 10-15 seconds.
I got 8 cards that do 950mh/s each and i got huge fluctuations on the account information on the website.
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Leave the dashboard open a bit - it should stabilize after 10-15 minutes - the graph should get more flat.
You can also try to specify static diff. Set the diff so that you submit one share about every 10-15 sec.
After all, hashrate itself doesn't count so much, it's the accumulated difficulty of your shares / block which makes the payout, so don't give too much attention to fliuctuations, they're more or less normal.
How can i specify static diff? Sorry i am new to the game
Use the password Field for your miner.
d=16 as password for example sets a static diff of 16
I didnt quite get that, can you be more specific ?
I got 2 workers now, because my main rig is running 7 cards and the other is running 1 card, until my m.2 to pcie gets here.
You launch your miner with something similar like this:
ccminer -o stratum+tcp://dcr.surpnova.cc:3252 -u myusername.myworkername -p x
Now you'd start it with:
ccminer -o stratum+tcp://dcr.surpnova.cc:3252 -u myusername.myworkername -p d=16
to get a static diff of 16
Hey, thanks for helping. Do i have to change the password on your website for the miner as well or leave it like it is ? I am using claymore to dual mine, not ccminer. So in the password field instead of x, i use d=16 right?
Should i make it more than 16 or is it ok ?
Should i do it for both miners or only the strong one ?
I got 8 cards that do 950mh/s each and i got huge fluctuations on the account information on the website.
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Leave the dashboard open a bit - it should stabilize after 10-15 minutes - the graph should get more flat.
You can also try to specify static diff. Set the diff so that you submit one share about every 10-15 sec.
After all, hashrate itself doesn't count so much, it's the accumulated difficulty of your shares / block which makes the payout, so don't give too much attention to fliuctuations, they're more or less normal.
How can i specify static diff? Sorry i am new to the game
Use the password Field for your miner.
d=16 as password for example sets a static diff of 16
I didnt quite get that, can you be more specific ?
I got 2 workers now, because my main rig is running 7 cards and the other is running 1 card, until my m.2 to pcie gets here.
You launch your miner with something similar like this:
ccminer -o stratum+tcp://dcr.surpnova.cc:3252 -u myusername.myworkername -p x
Now you'd start it with:
ccminer -o stratum+tcp://dcr.surpnova.cc:3252 -u myusername.myworkername -p d=16
to get a static diff of 16
I got 8 cards that do 950mh/s each and i got huge fluctuations on the account information on the website.
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Leave the dashboard open a bit - it should stabilize after 10-15 minutes - the graph should get more flat.
You can also try to specify static diff. Set the diff so that you submit one share about every 10-15 sec.
After all, hashrate itself doesn't count so much, it's the accumulated difficulty of your shares / block which makes the payout, so don't give too much attention to fliuctuations, they're more or less normal.
How can i specify static diff? Sorry i am new to the game
Use the password Field for your miner.
d=16 as password for example sets a static diff of 16
I didnt quite get that, can you be more specific ?
I got 2 workers now, because my main rig is running 7 cards and the other is running 1 card, until my m.2 to pcie gets here.
I got 8 cards that do 950mh/s each and i got huge fluctuations on the account information on the website.
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Leave the dashboard open a bit - it should stabilize after 10-15 minutes - the graph should get more flat.
You can also try to specify static diff. Set the diff so that you submit one share about every 10-15 sec.
After all, hashrate itself doesn't count so much, it's the accumulated difficulty of your shares / block which makes the payout, so don't give too much attention to fliuctuations, they're more or less normal.
How can i specify static diff? Sorry i am new to the game
Use the password Field for your miner.
d=16 as password for example sets a static diff of 16
I got 8 cards that do 950mh/s each and i got huge fluctuations on the account information on the website.
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Leave the dashboard open a bit - it should stabilize after 10-15 minutes - the graph should get more flat.
You can also try to specify static diff. Set the diff so that you submit one share about every 10-15 sec.
After all, hashrate itself doesn't count so much, it's the accumulated difficulty of your shares / block which makes the payout, so don't give too much attention to fliuctuations, they're more or less normal.
How can i specify static diff? Sorry i am new to the game
I got 8 cards that do 950mh/s each and i got huge fluctuations on the account information on the website.
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Leave the dashboard open a bit - it should stabilize after 10-15 minutes - the graph should get more flat.
You can also try to specify static diff. Set the diff so that you submit one share about every 10-15 sec.
After all, hashrate itself doesn't count so much, it's the accumulated difficulty of your shares / block which makes the payout, so don't give too much attention to fliuctuations, they're more or less normal.
I got 8 cards that do 950mh/s each and i got huge fluctuations on the account information on the website.
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Sometimes it shows 11000mh/s which cannot be right, and some times it goes down to 2000mh/s.
My cards are running stable with no reboots or anything, is there something i am doing wrong ?
Is there any pool where you can mine decred without registering?
Does anyone know?
Does anyone know?
I'll try to implement that over the weekend, however, you can just register with any throw-away email address and a random username.. you don't need to enter any private data or so.. I don't really see whats so bad about registering
Is there any pool where you can mine decred without registering?
Does anyone know?
Does anyone know?
Why do we have to register to your pool? Is this pool AML/KYC compliant? 
Wouldn't an DCR address be enough to mine there?
Wouldn't an DCR address be enough to mine there?
I'll add anonymous mining soon, until then please setup an account
I guess I'll wait. Please let us know when.
Hmmmm, so my hashrate according to the site is 836.97MH/s but claymore is consistently around 1005MH/s - is this anything too worry about?
Also my efficiency is about 93%... Is this a problem? Anything I can do to increase it?
Thanks
Also my efficiency is about 93%... Is this a problem? Anything I can do to increase it?
Thanks
Why do we have to register to your pool? Is this pool AML/KYC compliant?
Wouldn't an DCR address be enough to mine there?
Wouldn't an DCR address be enough to mine there?
I'll add anonymous mining soon, until then please setup an account
Why do we have to register to your pool? Is this pool AML/KYC compliant?
Wouldn't a DCR address be enough to mine there?
EDIT: typo
Wouldn't a DCR address be enough to mine there?
EDIT: typo
Hi there,
so what's the pool fee at the moment?
Didn't spot it on the site page
so what's the pool fee at the moment?
Didn't spot it on the site page
1%
Hi there,
so what's the pool fee at the moment?
Didn't spot it on the site page
so what's the pool fee at the moment?
Didn't spot it on the site page
mine got locked as well.. Kinda gave up on it for a while until I found this today.
[email protected]
no email sent, tried resetting password, and still no email for that either.
Thanks!
[email protected]
no email sent, tried resetting password, and still no email for that either.
Thanks!
both unlocked
Jump to: