Is there a problem with payments at the moment? http://blockchain.info/tx-index/8832946/ffbdcfc24139b20a1c1b0e0ae958e78a2932d8fc50a55e26eea8cc158ce7896f has been sitting there for over four hours now. I made a smaller later payout after it and it has allready arrived.
No. As you see, this transaction was broadcasted, so you just have to wait until it gets confirmed. Sometimes this can take longer than usual, but you don't need to worry. 
Topic: DeepBit pool thread for newbies - page 22. (Read 68897 times)
Hi there,
Is there a problem with payments at the moment? http://blockchain.info/tx-index/8832946/ffbdcfc24139b20a1c1b0e0ae958e78a2932d8fc50a55e26eea8cc158ce7896f has been sitting there for over four hours now. I made a smaller later payout after it and it has allready arrived.
Is there a problem with payments at the moment? http://blockchain.info/tx-index/8832946/ffbdcfc24139b20a1c1b0e0ae958e78a2932d8fc50a55e26eea8cc158ce7896f has been sitting there for over four hours now. I made a smaller later payout after it and it has allready arrived.
um its the standard graphics card that comes along with my dell laptop. i probably need to upgrade it right? and poclbm.
If you are confused by the poclbm, you can try GUIminer. It's the same as poclbm, but with a graphic interface.Usually integrated GPUs aren't very fast, but you can try if it's some kind of a modern Radeon chip.
um its the standard graphics card that comes along with my dell laptop. i probably need to upgrade it right? and poclbm.
im am confused on how to get started after downloading everything... no idea how to do this, but learning something new all the time.
What GPU do you have and what mining software you are going to use ?
im am confused on how to get started after downloading everything... no idea how to do this, but learning something new all the time.
When I click start mining, it just gets stuck at "Shares:0 accepted" and "Connecting...". This is very frustrating and I just can't seem to figure out why it isn't working. I know that I entered the correct email/username and password, after registering with both Slush and Deepbit but my GUIMiner just wont connect! I am using:
Is there any firewall or antivirus application blocking your connection to the pool ?Try disabling it for a few minutes and check if that's the cause.
Also try opening console and pinging our server to ensure that there is connection:
ping pit.deepbit.net
GUIMiner Connecting Problems! Please help
When I click start mining, it just gets stuck at "Shares:0 accepted" and "Connecting...". This is very frustrating and I just can't seem to figure out why it isn't working. I know that I entered the correct email/username and password, after registering with both Slush and Deepbit but my GUIMiner just wont connect! I am using:
GUIMiner version: v2012-02-19
Operating system: Windows 7
Miner backend: CUDA
Video card: NVIDIA GeForce 9600M GT
Server: Deepbit and Slush
I know NVIDIA is not the best for mining, but I am just trying to get it up and running before I invest in a better graphics card. I have been struggling with this problem for the past few days and would greatly appreciate some help and advice.
Thanks in advance !
When I click start mining, it just gets stuck at "Shares:0 accepted" and "Connecting...". This is very frustrating and I just can't seem to figure out why it isn't working. I know that I entered the correct email/username and password, after registering with both Slush and Deepbit but my GUIMiner just wont connect! I am using:
GUIMiner version: v2012-02-19
Operating system: Windows 7
Miner backend: CUDA
Video card: NVIDIA GeForce 9600M GT
Server: Deepbit and Slush
I know NVIDIA is not the best for mining, but I am just trying to get it up and running before I invest in a better graphics card. I have been struggling with this problem for the past few days and would greatly appreciate some help and advice.
Thanks in advance !
Is there a way to verify my email if I no longer have the registration email? One of my miners went down last night and it would be cool to use the email notification feature.
Sorry, we have strict rules on e-mail validation. If you need notifications, you can create a new account with some real e-mail address.
Is there a way to verify my email if I no longer have the registration email? One of my miners went down last night and it would be cool to use the email notification feature.
Thanks,
-davecoin
Thanks,
-davecoin
Okay cheers, thanks for helping me out.
Hi, Tyco. I've been a pool-member for 8 months without any outages or other troubles. However today I'm missing a manual payout, getting an "Error No such transaction". to my wallet: 12ozZFVw3UKEymiq3RDmrVBfnYvYPk2g6K
The non existing transaction in question is timestamped; 05.06.2012 06:01 and the amount is for 0.81 BTC. The amount is offcause credited to my Deepbit account, but as said, has not gone through.
There is a help page that appears each time after manual payment request. As it says, sometimes delays up to a few hours are possible, this is normal.The non existing transaction in question is timestamped; 05.06.2012 06:01 and the amount is for 0.81 BTC. The amount is offcause credited to my Deepbit account, but as said, has not gone through.
According to blockchaininfo, your transaction got 3 confirmations already: http://blockchain.info/tx-index/7859233/37abfa7f30ebb3024cfd743ac97199de32c3d34c9dd74cf3eed26fc0281a6ace
Hi, Tyco. I've been a pool-member for 8 months without any outages or other troubles. However today I'm missing a manual payout, getting an "Error No such transaction". to my wallet: 12ozZFVw3UKEymiq3RDmrVBfnYvYPk2g6K
The non existing transaction in question is timestamped; 05.06.2012 06:01 and the amount is for 0.81 BTC. The amount is offcause credited to my Deepbit account, but as said, has not gone through.
Can I PM you my account details? I do not want to post them here, or is the supplied info enough?
The non existing transaction in question is timestamped; 05.06.2012 06:01 and the amount is for 0.81 BTC. The amount is offcause credited to my Deepbit account, but as said, has not gone through.
Can I PM you my account details? I do not want to post them here, or is the supplied info enough?
http://www.benreeves.co.uk/tx-index/7859233/37abfa7f30ebb3024cfd743ac97199de32c3d34c9dd74cf3eed26fc0281a6ace
http://www.benreeves.co.uk/address/1VayNert3x1KzbpzMGt2qdqrAThiRovi8
seems many didn't got confirmation on their payment
Hi, Tyco. I've been a pool-member for 8 months without any outages or other troubles. However today I'm missing a manual payout, getting an "Error No such transaction". to my wallet: 12ozZFVw3UKEymiq3RDmrVBfnYvYPk2g6K
The non existing transaction in question is timestamped; 05.06.2012 06:01 and the amount is for 0.81 BTC. The amount is offcause credited to my Deepbit account, but as said, has not gone through.
Can I PM you my account details? I do not want to post them here, or is the supplied info enough?
The non existing transaction in question is timestamped; 05.06.2012 06:01 and the amount is for 0.81 BTC. The amount is offcause credited to my Deepbit account, but as said, has not gone through.
Can I PM you my account details? I do not want to post them here, or is the supplied info enough?
sorry to post here... but i cant post anywhere else on this forum. can you please help
I don't see your question anywhere.If you have some specific problem with mining at Deepbit, you can also use e-mail (at the bottom of any pool's webpage).
hi there.
sorry to post here... but i cant post anywhere else on this forum. can you please help
sorry to post here... but i cant post anywhere else on this forum. can you please help
I thank you [Tycho] for your correction and am very sorry for my mistake^^
Long live Deepbit
Long live Deepbit
So, instead of typing:
Type your account Deepbit info correctly :
Hope this will help!
Actually it's [email protected]_something, not [email protected]Code:
python poclbm.py --platform 0 -d 0 [email protected]:[email protected]:8332
Type your account Deepbit info correctly :
Code:
python poclbm.py --platform 0 -d 0 [email protected]:[email protected]:8332
Hope this will help!
Also you can change the default worker's password (the one that has the same login as your account) and use it.
Setting up mining with a deepbit account on poclbm was getting me the following message :
Then I understood (tadaa! <== Kind'o Harry Potter effect...) that the login for the Deepbit Webpage is very different than the one you have to type in the terminal...
If you go to your Deepbit "My Account" page, you will notice that:
your mining username is your email with "_something"...
And on the right, there is another column named "Pass" with the password you have to type in the command...
So, instead of typing:
Type your account Deepbit info correctly :
Hope this will help!
Code:
pit.deepbit.net:8332 Deepbit.lib.InfoException: wrong login or password: Basic
Then I understood (tadaa! <== Kind'o Harry Potter effect...) that the login for the Deepbit Webpage is very different than the one you have to type in the terminal...
If you go to your Deepbit "My Account" page, you will notice that:
your mining username is your email with "_something"...
And on the right, there is another column named "Pass" with the password you have to type in the command...
So, instead of typing:
Code:
python poclbm.py --platform 0 -d 0 [email protected]:[email protected]:8332
Type your account Deepbit info correctly :
Code:
python poclbm.py --platform 0 -d 0 [email protected]:[email protected]:8332
Hope this will help!
Alright I'll keep in mind but I few questions:
After that I registed my account, Must I create a new worker?
It's not required, but I recommend at least changing your worker password so it won't be the same as your account password.After that I registed my account, Must I create a new worker?
I did attempted in creating one but it added a _0 to my email adrerss after .com:
let's assume some register under:
[email protected] and if he added a new worker then user would be [email protected]_0? Correct?
Yes, this "0" is that "worker login's tail", it's added to make your workers unique. You can change this "0" to some other short word to distinguish your workers.let's assume some register under:
[email protected] and if he added a new worker then user would be [email protected]_0? Correct?
I understand that while using ufasoft, that I need enter the created worker and password
but it's worker login's tail and failure detection that I don't know how to add those miner software!
You don't need to use failure threshold setting in your miner.but it's worker login's tail and failure detection that I don't know how to add those miner software!
Worker's login name consists of your account name + "_" + tail
For example, if your account name is "[email protected]", your worker's login tail is "gpu2", the resulting worker login would be "[email protected]_gpu2".
There, I am finally connect with ufasoft! few quick questions:
While mining via cpu, Is it recommended to enable PPS instead of Prop and It is also possible to enable long pooling at this point!
Again it great I can connect!
Regard
Jump to: