im getting 110 mh/s.. how is that?
Topic: DeepBit pool thread for newbies - page 24. (Read 68897 times)
yeah i read that too -.- but hey I was building a gaming pc at the time
im getting 110 mh/s.. how is that?
im getting 110 mh/s.. how is that?
Alrigt i got it working.. i just did File->New miner->I took "Cuda" miner cause i have a NVIDIA GeForce GTX 570... you think thats the right one?
allsow i get higher Temps. when running it that when running Battlefield 3... is that normal?
Yes, sometimes you may need to run your GPU faster.allsow i get higher Temps. when running it that when running Battlefield 3... is that normal?
By the way, nVidia cards are far less effective at mining, comparing with ATI.
Alrigt i got it working.. i just did File->New miner->I took "Cuda" miner cause i have a NVIDIA GeForce GTX 570... you think thats the right one?
allsow i get higher Temps. when running it that when running Battlefield 3... is that normal?
allsow i get higher Temps. when running it that when running Battlefield 3... is that normal?
how can i get more infos on the error? all i get is following:
2012-03-15 18:07:16: Listener for "Default" started
2012-03-15 18:07:16: Listener for "Default": pit.deepbit.net:8332 15/03/2012 18:07:16, Unexpected error:
2012-03-15 18:07:21: Listener for "Default" shutting down
the shutting down I do..
Hmm, I don't know how to get the error info.2012-03-15 18:07:16: Listener for "Default" started
2012-03-15 18:07:16: Listener for "Default": pit.deepbit.net:8332 15/03/2012 18:07:16, Unexpected error:
2012-03-15 18:07:21: Listener for "Default" shutting down
the shutting down I do..
Can you try any other miner like cgminer or phoenix to check if this is caused by miner or something else ?
I downloaded this: poclbm-GUI miner
now when i set it up with username=e-mail address I get a error: " wrong login or password"
if I type in username=worker-name(from deepbit), i get "Unexpected error:"
the commandline executed is: poclbm.exe [email protected]:[email protected]:8332 --device=0 --platform=0 --verbose
what am I missing?
Do you know that you site password and worker password can be different ? (And you better keep them different)now when i set it up with username=e-mail address I get a error: " wrong login or password"
if I type in username=worker-name(from deepbit), i get "Unexpected error:"
the commandline executed is: poclbm.exe [email protected]:[email protected]:8332 --device=0 --platform=0 --verbose
what am I missing?
You should use of of your worker names as miner login and the password of corresponding worker.
Are you sure that you have the latest version of poclbm ?
What exactly unexpected error it was ?
Yeah now they are different and im sure I typed in the worker name + the correct password...
how can i get more infos on the error? all i get is following:
2012-03-15 18:07:16: Listener for "Default" started
2012-03-15 18:07:16: Listener for "Default": pit.deepbit.net:8332 15/03/2012 18:07:16, Unexpected error:
2012-03-15 18:07:21: Listener for "Default" shutting down
the shutting down I do..
I downloaded this: poclbm-GUI miner
now when i set it up with username=e-mail address I get a error: " wrong login or password"
if I type in username=worker-name(from deepbit), i get "Unexpected error:"
the commandline executed is: poclbm.exe [email protected]:[email protected]:8332 --device=0 --platform=0 --verbose
what am I missing?
Do you know that you site password and worker password can be different ? (And you better keep them different)now when i set it up with username=e-mail address I get a error: " wrong login or password"
if I type in username=worker-name(from deepbit), i get "Unexpected error:"
the commandline executed is: poclbm.exe [email protected]:[email protected]:8332 --device=0 --platform=0 --verbose
what am I missing?
You should use of of your worker names as miner login and the password of corresponding worker.
Are you sure that you have the latest version of poclbm ?
What exactly unexpected error it was ?
Hey everyone!
im new to this, but read and did one or two things too...
my current balance.. 0.00016195 BTC^^
now im having problems setting up my GPU miner
I downloaded this: poclbm-GUI miner
now when i set it up with username=e-mail address I get a error: " wrong login or password"
if I type in username=worker-name(from deepbit), i get "Unexpected error:"
the commandline executed is: poclbm.exe [email protected]:[email protected]:8332 --device=0 --platform=0 --verbose
what am I missing?
thanks in advance!
im new to this, but read and did one or two things too...
my current balance.. 0.00016195 BTC^^
now im having problems setting up my GPU miner
I downloaded this: poclbm-GUI miner
now when i set it up with username=e-mail address I get a error: " wrong login or password"
if I type in username=worker-name(from deepbit), i get "Unexpected error:"
the commandline executed is: poclbm.exe [email protected]:[email protected]:8332 --device=0 --platform=0 --verbose
what am I missing?
thanks in advance!
Hey is anyone else not seeing the stats on the statistics page? I don't see are pool luck anymore.
This is one of the most frequently asked question.Luck data is hidden for at least 24h after each difficulty adjustment.
Hey is anyone else not seeing the stats on the statistics page? I don't see are pool luck anymore.
SOLVED
ok... I have several computers on deepbit using diablominer. I can see my overall mhash. I want to set my computers up so that i can monitor individual miners, but i'm having difficulties and can't really find out how to do it. I've already setup seperate computer names on my deepbit page with secondary names and secondary passwords.. but i can't figure out what to do with the script in the command prompt... i've tried several combinations but with no luck. I've been able to do this with BTCguild with no problem, but i would like to set this up with deepbit also... i run dual pools with btcguild and deepbit.
Hey Guys
I have one question : When I'm overcloaking my graphic card, I'm always passing to workqueue? I got 0 share after a couple of minutes!
I'm using an Ati 5770 (OC at 960/300) with phoenix 2 (I used many other miners). Do I need to put a special string to my config file?
Thanks for the answer!
I have one question : When I'm overcloaking my graphic card, I'm always passing to workqueue? I got 0 share after a couple of minutes!
I'm using an Ati 5770 (OC at 960/300) with phoenix 2 (I used many other miners). Do I need to put a special string to my config file?
Thanks for the answer!
Is the pool having troubles? deepbit.net again shows a steep drop in miner performance despite my miners running at full speed.
hmm I tried to ping the server pit.deepbit.net and this is the results:Pinging pit.deepbit.net [46.4.121.118] with 32 bytes of data:
Reply from 46.4.121.118: bytes=32 time=186ms TTL=43
Reply from 46.4.121.118: bytes=32 time=187ms TTL=43
Reply from 46.4.121.118: bytes=32 time=192ms TTL=43
Reply from 46.4.121.118: bytes=32 time=205ms TTL=43
Also my machine 95% of the time cannot connect to return results, it just says "A connection with the server could not be established."
Interesting.
Is the pool having troubles? deepbit.net again shows a steep drop in miner performance despite my miners running at full speed.
hmm I tried to ping the server pit.deepbit.net and this is the results:Pinging pit.deepbit.net [46.4.121.118] with 32 bytes of data:
Reply from 46.4.121.118: bytes=32 time=186ms TTL=43
Reply from 46.4.121.118: bytes=32 time=187ms TTL=43
Reply from 46.4.121.118: bytes=32 time=192ms TTL=43
Reply from 46.4.121.118: bytes=32 time=205ms TTL=43
Also my machine 95% of the time cannot connect to return results, it just says "A connection with the server could not be established."
ok... I have several computers on deepbit using diablominer. I can see my overall mhash. I want to set my computers up so that i can monitor individual miners, but i'm having difficulties and can't really find out how to do it. I've already setup seperate computer names on my deepbit page with secondary names and secondary passwords.. but i can't figure out what to do with the script in the command prompt... i've tried several combinations but with no luck. I've been able to do this with BTCguild with no problem, but i would like to set this up with deepbit also... i run dual pools with btcguild and deepbit.
Is the pool having troubles? deepbit.net again shows a steep drop in miner performance despite my miners running at full speed.
A new version of Guiminer...?
https://bitcointalksearch.org/topic/m.755843
I wonder if this is a new working version of guiminer or a virus ...?
https://bitcointalksearch.org/topic/m.755843
I wonder if this is a new working version of guiminer or a virus ...?
I am currently mining at btc guild with 3 gh/s and getting a stale rate of about 2.3%. If I mine with deepbit, will my stale shares be less?
im getting a 2.24% stale rate at deepbit currently so its a little less Thats exactly what I did that works best for now. Pushed the memory clock up a little and I did it up to 35 mhash/s
Further increasing clock causes GPU failure (freeze with bright screen after few minutes of running. Current temp is around 6-62 degrees Celsium
But who cares- I will reduce the AC temperature at the room so the PC will act as heater LOL
One day if I buy a 5000 or 6000 I will be very very happy
And BTW dont be shy-give me your adress I will send some coins!
Than you for donation
I read it and typing -v in the flags thingy works bad 
it reduces to 1-2 Mhash/s, but using the -2 thingy improved the speed a little.
it reduces to 1-2 Mhash/s, but using the -2 thingy improved the speed a little.try -w32
Thats exactly what I did that works best for now. Pushed the memory clock up a little and I did it up to 35 mhash/s
Further increasing clock causes GPU failure (freeze with bright screen after few minutes of running. Current temp is around 6-62 degrees Celsium
But who cares- I will reduce the AC temperature at the room so the PC will act as heater LOL
One day if I buy a 5000 or 6000 I will be very very happy
And BTW dont be shy-give me your adress I will send some coins!
1EzAmnB2s8YpZEXSRbHEH17EG4YkgMz5XU
I read it and typing -v in the flags thingy works bad it reduces to 1-2 Mhash/s, but using the -2 thingy improved the speed a little.
it reduces to 1-2 Mhash/s, but using the -2 thingy improved the speed a little.try -w32
Thats exactly what I did that works best for now. Pushed the memory clock up a little and I did it up to 35 mhash/s
Further increasing clock causes GPU failure (freeze with bright screen after few minutes of running. Current temp is around 6-62 degrees Celsium
But who cares- I will reduce the AC temperature at the room so the PC will act as heater LOL
One day if I buy a 5000 or 6000 I will be very very happy
And BTW dont be shy-give me your adress I will send some coins!
Jump to: