lindin99 please give me an address to pay to.
Thank you .
prize money sent to your address:
0.04365
https://blockchain.info/address/13eYRoqNebCCVQMxHW4VDXzyHsUZ8DnDmZ
Topic: Diff thread Aug 15 to Aug 29? prize = $25 picks are closed. (Read 5830 times)
lindin99 please give me an address to pay to.
Thank you .
prize money sent to your address:
0.04365
https://blockchain.info/address/13eYRoqNebCCVQMxHW4VDXzyHsUZ8DnDmZ
lindin99 please give me an address to pay to.
Thank you .
Aug 29 2016 220,755,908,330 1.56% 1,580,232,344 GH/s
I won ?)))
I won ?)))
i think you are not,
your pick had to be 1.6% , since 1.56% = 1.6% when rounded. we don't round
1.5 covers 1.50000000 to 1.599999999
diff was 1.56
we use 1.5 as a short notation
to save space.
I suppose next game we can write as
1.5000
1.6000
1.7000
rather then
1.5
1.6
1.7
I need a btc addy to pay to.
lindin99 please give me an address to pay to.
Aug 29 2016 220,755,908,330 1.56% 1,580,232,344 GH/s
I won ?)))
I won ?)))
i think you are not,
your pick had to be 1.6% , since 1.56% = 1.6% when rounded.
Aug 29 2016 220,755,908,330 1.56% 1,580,232,344 GH/s
I won ?)))
I won ?)))
We are coming to a close about 16 blocks left
Spike is back and we are near 1.30%
https://bitcoinwisdom.com/bitcoin/difficulty
Two blocks to go! Does this mean my 1.2% has a good chance if miners take a long time to find these two blocks? Spike is back and we are near 1.30%
https://bitcoinwisdom.com/bitcoin/difficulty
I just took the 1.2% from nextdifficulty.com when I posted it, it was the prediction at that moment, and it's very close again now.
https://bitcoinwisdom.com/bitcoin/difficulty
Also I think that we have a winner too (Congrats!), but it's Philip's part to confirm it since it's his show.
Quote
Aug 29 2016 220,755,908,330 1.56% 1,580,232,344 GH/s
Very interesting result. And I think it's good that the difficulty didn't rise much (although I really thought it will).Also I think that we have a winner too (Congrats!), but it's Philip's part to confirm it since it's his show.
We are coming to a close about 16 blocks left
Spike is back and we are near 1.30%
https://bitcoinwisdom.com/bitcoin/difficulty
Bitcoin Difficulty: 217,375,482,757
Estimated Next Difficulty: 220,194,302,630 (+1.30%)
Adjust time: After 16 Blocks, About 2.6 hours
Hashrate(?): 1,599,970,000 GH/s
Block Generation Time(?):
1 block: 9.8 minutes
3 blocks: 29.4 minutes
6 blocks: 58.9 minutes
Updated: 7:50 (8.2 minutes ago)
Spike is back and we are near 1.30%
https://bitcoinwisdom.com/bitcoin/difficulty
Bitcoin Difficulty: 217,375,482,757
Estimated Next Difficulty: 220,194,302,630 (+1.30%)
Adjust time: After 16 Blocks, About 2.6 hours
Hashrate(?): 1,599,970,000 GH/s
Block Generation Time(?):
1 block: 9.8 minutes
3 blocks: 29.4 minutes
6 blocks: 58.9 minutes
Updated: 7:50 (8.2 minutes ago)
Looks like my 0.5% is quite promising 
you do have a shot at it.
Looks like my 0.5% is quite promising
https://bitcoinwisdom.com/bitcoin/difficulty
Bitcoin Difficulty: 217,375,482,757
Estimated Next Difficulty: 219,854,981,071 (+1.14%)
Adjust time: After 181 Blocks, About 1.2 days
Hashrate(?): 1,487,982,725 GH/s
Block Generation Time(?):
1 block: 9.9 minutes
3 blocks: 29.8 minutes
6 blocks: 59.5 minutes
Updated: 8:10 (4.4 minutes ago
pretty good.
under 2% looks very possible and maybe 0% will happen
Bitcoin Difficulty: 217,375,482,757
Estimated Next Difficulty: 219,854,981,071 (+1.14%)
Adjust time: After 181 Blocks, About 1.2 days
Hashrate(?): 1,487,982,725 GH/s
Block Generation Time(?):
1 block: 9.9 minutes
3 blocks: 29.8 minutes
6 blocks: 59.5 minutes
Updated: 8:10 (4.4 minutes ago
pretty good.
under 2% looks very possible and maybe 0% will happen
anyone track the biggest swing in a difficulty adjustment. like highest was +20, lowest was -10 for a 30% swing in any given difficulty adjustment since the contest started?
15.08.2016 18:59 425376
27.08.2016 08:16 427037
1661 Blocks Diff: -0.16% Next Diff :217021739064
lol it has gone to negative.
27.08.2016 08:16 427037
1661 Blocks Diff: -0.16% Next Diff :217021739064
lol it has gone to negative.
The amount of hashpower controlled by bitmaintech is amazing.
My pick is -1.2 which if I do win I will roll it over.
I think I am the only one with a shot.
This was with 430 blocks left
this is with 350 blocks to go. The redline is the one that is right about 0% !!
https://bitcoinwisdom.com/bitcoin/difficulty
Bitcoin Difficulty: 217,375,482,757
Estimated Next Difficulty: 220,592,241,924 (+1.48%)
Adjust time: After 335 Blocks, About 2.3 days
Hashrate(?): 1,476,737,794 GH/s
Block Generation Time(?):
1 block: 9.8 minutes
3 blocks: 29.6 minutes
6 blocks: 59.1 minutes
Updated: 8:5 (3.6 minutes ago)
-1.2 = philipma1957 if it hits I will roll it over.
+0.5 = moe7865
+1.2 = LoyceV
+1.3 = wmabern
+1.5 = Lindin99
+2.1 = Valkir
+2.2 = in2tactics
+2.3 = talks_cheep
+2.5 = Veves1
+2.7 = Xanidas
+2.9 = petahashminer
+3.1 = Biodom
+3.2 = tertius993 Please note you picked 3.1 it was picked I gave you 3.2
+3.3 = fr4nkthetank
+3.7 = gt_addict
+3.8 = Kenscho
+3.9 = VRobb
+4.0 = edonkey
+4.1 = testerman
+4.2 = HerbPean
+4.4 = mikestang
+4.7 = generalt
+4.8 = DanielRo
+4.9 = NeuroticFish
+5.0 = Psi
+5.1 = blindminer
+5.2 = d57heinz
+5.3 = pusttiu
+5.5 = vapourminer
+7.2 = Chris!
+8.2 = Kexkey
picks are closed.
15.08.2016 18:59 425376
27.08.2016 08:16 427037
1661 Blocks Diff: -0.16% Next Diff :217021739064
lol it has gone to negative.
27.08.2016 08:16 427037
1661 Blocks Diff: -0.16% Next Diff :217021739064
lol it has gone to negative.
I hope we can do under 2 %
No cakes please I prefer ice cream
This chart looks good with 430 blocks left.
At this rate, we could be deep in the negatives, -3.0% or more. That would be awesome, but I doubt the trend will continue. This chart looks good with 430 blocks left.
Yeah stainless steel I need to make some stainless steel items.
I want this insert in stainless steel http://cdn3.volusion.com/tupwt.vxhen/v/vspfiles/photos/NP-3813-2.jpg?1471996598
If you have 3 inserts vs one that comes with the kit making the cake is easier
http://www.createandcraft.com/common/images/product/124579/super/124579_SUPER__000_20141206.jpg
I want this insert in stainless steel http://cdn3.volusion.com/tupwt.vxhen/v/vspfiles/photos/NP-3813-2.jpg?1471996598
If you have 3 inserts vs one that comes with the kit making the cake is easier
http://www.createandcraft.com/common/images/product/124579/super/124579_SUPER__000_20141206.jpg
ferget printing prosthetic hands, replacement hardware, controls etc.. stuff for CAKE???
NOW we're talkin
No cakes please I prefer ice cream
This chart looks good with 430 blocks left.
This chart looks good with 430 blocks left.
It's been a fun adventure so far I started off with a monoprice 3d printer ( https://www.amazon.com/Monoprice-Select-Printer-Heated-Filament/dp/B01FL49VZE/ref=sr_1_2?ie=UTF8&qid=1472173723&sr=8-2&keywords=monoprice+3d). It has amazing review's for the money on it.... but I got unlucky and guess mine was not checked for quality. Fan fell off during printing which is bad... then the filament feeder broke a few day's later luckily amazon has great return policy.
The little one got the bug in me that enjoyed it enough after returning that monoprice one I upgraded to a Lulzbot 3d printer after much research. Have been just starting off with PLA/ABS plastics to get my skills up. Once I know what I am doing it is not even just plastic limit with this 3d printer
everything from stainless steel, magnetic iron, copper, tons of plastics, to even wood - https://www.lulzbot.com/store/filament .
Been a fun week to say the least learning. Messing around in a loft during summer is not a whole lot of fun to say the least. Been a while since I have went into my barn's loft. Hope all is well with your solar array, still a very sweet setup from pictures you have shown.
The little one got the bug in me that enjoyed it enough after returning that monoprice one I upgraded to a Lulzbot 3d printer after much research. Have been just starting off with PLA/ABS plastics to get my skills up. Once I know what I am doing it is not even just plastic limit with this 3d printer
everything from stainless steel, magnetic iron, copper, tons of plastics, to even wood - https://www.lulzbot.com/store/filament . Been a fun week to say the least learning. Messing around in a loft during summer is not a whole lot of fun to say the least. Been a while since I have went into my barn's loft. Hope all is well with your solar array, still a very sweet setup from pictures you have shown.
i have to resist the temptation to just grab one of the cheapest ones out there, for just the reasons you mention and others. hitting its limitations too soon, or lack of quality control. but i suppose you gotta start somewhere and at least i would know what to look for in a better one. just get something to learn on, expect it to break.
never know you could get different materials. bronze, bamboo ??
oh boy me wants even worse now..
Yeah stainless steel I need to make some stainless steel items.
I want this insert in stainless steel
If you have 3 inserts vs one that comes with the kit making the cake is easier
It's been a fun adventure so far I started off with a monoprice 3d printer ( https://www.amazon.com/Monoprice-Select-Printer-Heated-Filament/dp/B01FL49VZE/ref=sr_1_2?ie=UTF8&qid=1472173723&sr=8-2&keywords=monoprice+3d). It has amazing review's for the money on it.... but I got unlucky and guess mine was not checked for quality. Fan fell off during printing which is bad... then the filament feeder broke a few day's later luckily amazon has great return policy.
The little one got the bug in me that enjoyed it enough after returning that monoprice one I upgraded to a Lulzbot 3d printer after much research. Have been just starting off with PLA/ABS plastics to get my skills up. Once I know what I am doing it is not even just plastic limit with this 3d printer everything from stainless steel, magnetic iron, copper, tons of plastics, to even wood - https://www.lulzbot.com/store/filament .
Been a fun week to say the least learning. Messing around in a loft during summer is not a whole lot of fun to say the least. Been a while since I have went into my barn's loft. Hope all is well with your solar array, still a very sweet setup from pictures you have shown.
The little one got the bug in me that enjoyed it enough after returning that monoprice one I upgraded to a Lulzbot 3d printer after much research. Have been just starting off with PLA/ABS plastics to get my skills up. Once I know what I am doing it is not even just plastic limit with this 3d printer
everything from stainless steel, magnetic iron, copper, tons of plastics, to even wood - https://www.lulzbot.com/store/filament . Been a fun week to say the least learning. Messing around in a loft during summer is not a whole lot of fun to say the least. Been a while since I have went into my barn's loft. Hope all is well with your solar array, still a very sweet setup from pictures you have shown.
i have to resist the temptation to just grab one of the cheapest ones out there, for just the reasons you mention and others. hitting its limitations too soon, or lack of quality control. but i suppose you gotta start somewhere and at least i would know what to look for in a better one. just get something to learn on, expect it to break.
never know you could get different materials. bronze, bamboo ??
oh boy me wants even worse now..
Jump to: