Topic: [DISCONTINUED] cryp.today Mining revenue stats Scrypt Scrypt-N X11 X13 - page 27. (Read 144319 times)

i was or still in same boat as you but i mine with waffle x11 pool.i started mining with waffle on june 21st and over 8 days averaged 0.00125101125 with 2500-2600 khashes for x11.

This some great work.  I am wondering and worried that I am not maximizing my mining profits with clevermining.  I guess I should say, for my hashrate, I was expecting more profit per day.  My hashrate goes from 6.5 (6500) to 7.2 (7200).  For the last bit, this is what I am seeing for profits from clevermining listed below. I am just curious if this is just how it is now.  I have had 21 payouts in June even though I have not had any down time more than 20 mins and its rare.  My average payout is 0.010411919.
I am wondering what other people are seeing. 
Thank you



June 29, 2014 2:31am   0.00897795
June 28, 2014 1:30am   0.01659576
June 26, 2014 1:30am   0.01847981
June 24, 2014 1:30am   0.01020285
June 23, 2014 1:30am   0.01005169
June 22, 2014 6:31am   0.02029844
June 21, 2014 1:30am   0.01891426
June 19, 2014 1:30am   0.01761607
June 17, 2014 1:30am   0.01323214
June 16, 2014 1:30am   0.01178895
June 15, 2014 2:36am   0.0112235
June 14, 2014 1:30am   0.01515073
June 13, 2014 1:30am   0.01460588
June 12, 2014 1:30am   0.01048411
June 11, 2014 1:30am   0.01424897
June 10, 2014 1:30am   0.01420631
June 8, 2014 2:36am   0.00797695
June 8, 2014 1:30am   0.01057493
June 6, 2014 1:30am   0.01903323
June 4, 2014 1:35am   0.01041084
June 3, 2014 1:34am   0.01197182
June 2, 2014 1:36am   0.01134279
June 1, 2014 1:54am   0.00455766

Charts have been updated for today. No major changes.

https://cryptocointalk.com/topic/12901-reality-is-sinking-in-as-the-people-realize-the-dream-of-mining-coins-to-become-wealthy-is-false/

See first post third line below the pictures.

can i have a downloadable google docs file, please?

Correct, excellent miner. My head hurts with them all now.

Charts have been updated for today. No major changes.

I love your work!
I guess I may be similar to other people where they have this question buzzing around in their head: "What should I do with my GPU rig to obtain best profit?" Your thread is answering a little bit more specific question: "Which pool should I choose to obtain best profit with my Scrypt (ooooh, now converted to ... algo) mining rig?" You reply to the latter question very well, there is no question about it.
(Well, including scrypt.cc is mixing this picture up a bit... )

I hear ya, and I'll probably remove CoinShift soon, however that won't help much with other algos - I'm using ASICs for scrypt mining so the best I can do is replace one Scrypt pool with another.

As for X13 et al I'll be adding some soon (likely within ~ a week), but I hope eventually most of that mess will be replaced with improved multialgo swithing tools so that we could track overall pool profitability as opposed to having multiple numbers for each pool.

Crazy rental deals however is another story. Might not be easy to replicate so not that useful to someone else. I have some plans in that area too but I need to give it some more thought.

Thanks for the feedback, I appreciate it.

Charts have been updated. Sorry again for the delay.

Nicehash has connectivity issues, which affected the numbers.

Update will be posted later today. Sorry for the delay, weekend in the boonies as usual.

Still do not really understand why X13 is not covered more thoroughly (on the cost of leaving out very similarly productive scrypt pools)...  

Started                                 Rated price (BTC/MH/day)    Rent time (hours)    Amount (BTC)    Mining rig rented
Fri Jun 27 21:34:42 UTC 2014            0.00130000                        150              0.20068751    CheapFlatPrice (X13 24.70 MH/s)

Leaserig still rocks sometimes. (Probably you have to be really lucky too.) Above is just off your charts with 0.00537 BTC/scryptMH/d. (Should be 0.0068 BTC/scryptMH/d if taking into account power consumption.)

Also, MiningRigRental does a great job too adding new algos pretty early. X15, Nist5, Groestl. Also with some very crazy rent prices going on there.

Charts have been updated for today. No major changes.

I'm still on 13.12 drivers because that was the most stable version at the time I set up most of my rigs. I think v5 just doesn't work properly with 13.12, I get "Error -4: Enqueueing kernel onto command queue", tried it on a couple of different rigs. So I just need to do some testing, maybe a clean install of Windows or BAMT if there is one with 14.6 drivers.

Nice data, thanks for sharing.

May be relevant. I saw this comment in "official" v5 sgminer thread:


I constantly had the same issue. No matter how well I did my conf file to point to the right kernel, it always used ckolivas somehow. But always tried with Cgwatcher only, never run the stuff from cmd prompt. I am now rented out for the whole day, but suchmoon this could also help you out although you never stated your type of problem with v5.

One of my rig took stupidly insane time to upgrade to 14.6.
Uninstall+Install still left 13.2 as a driver of each card (later seen in Device manager) and kept (reinstalled FFS!) the old AMD package. Yes, I used the 310MB file from AMD 14.6RC link.
Uninstall+Removing AMD folders still did the same.
Uninstall+Removing AMD folders + Ccleaner still no success.
Uninstall+Removing AMD folders + Removing many AMD references from regedit + CCleaner + Uninstalling cards one by one from Device manager did the thing.
I lost one full day almost. These installs take ages...

(My other rig conversion went smoothly to 14.6 maybe due to the reason it was perfectly upgraded (simple uninstall+install) to 14.4 few days earlier.)

Thank you for posting this. I've been keeping an eye on these developments but still haven't decided if I want to sacrifice a rig or two to try 14.6.

Just to level the playing field if anyone missed>
https://bitcointalksearch.org/topic/annx11x13-x11-darkcoinx13-marucoin-miner-based-on-sph-sgminer-623409
This is a very messy topic, but you may be able to get out latest essentials for some more speed bump for X11 and X13.
With 14.6 RC driver Gigabyte R9280x now does 4,35 MHs on X11 stable and 3,1 MHs on X13 (stability IDK).
Draws the same power as latest versions. 1450 W for 8 cards in 2 rigs.

This is different from V5 sgminer as I had spent time with it but still no luck.