Topic: [DISCONTINUED] cryp.today Mining revenue stats Scrypt Scrypt-N X11 X13 - page 54. (Read 144321 times)
March 23, 2014, 11:50:33 AM
I went down twice. So yeah, that is not cool. However stable or not, my profits are there. Hopefully they can get it steady so you can test.
March 23, 2014, 11:38:07 AM
Added CoinShift. Will not add CoinSolver - their stratum server went down three times in less than 18 hours before I decided to move the rig elsewhere. It looks like they have some work to do on stability. Will remove Middlecoin tomorrow.
Edit: I'm testing a couple of DOGE pools, might be adding one of them next week.
Edit: I'm testing a couple of DOGE pools, might be adding one of them next week.
March 23, 2014, 09:34:24 AM
Payout of 0.011766688BTC at ~1.6Mh/s = 0.00735418BTC/Day/Mh at CoinSolver
March 22, 2014, 01:33:02 PM
Might also want to include GHash.io/DOGE as they've finally got it listed on the balances page and you can make withdrawals now (which was essential to be viable).
I'm thinking about adding DOGE, not sure yet if it's going to be GHash or not. As soon as I get some new hardware tested and benchmarked.
March 22, 2014, 12:29:52 PM
Might also want to include GHash.io/DOGE as they've finally got it listed on the balances page and you can make withdrawals now (which was essential to be viable).
March 22, 2014, 12:01:17 PM
suchmoon, criterion used for the analysis produced Mh? Probably better profit bound to the same types of cards - say 290. Vertkoyn because gives smaller values by 50%.
sorry for google english.
sorry for google english.
All numbers are adjusted for 1 MH/s, for example if my rig produces 3.2 MH/s, its earnings will be divided by 3.2 to put the number on the chart. The hardware is not identical across all pools, but it is tuned for stability and reliability with no hardware errors, so that anyone with the same nominal hashrate could achieve comparable results without extensive tweaking.
As for Vertcoin, its earnings have been adjusted to be comparable with Scrypt. In other words, if you take a Scrypt AMD GPU rig that produces 1 MH/s, and use it for Vertcoin with some basic retuning, you should be able to get the amount of BTC shown on the chart. The actual ratio used for my hardware is approximately 47.1%.
March 22, 2014, 11:45:37 AM
No majors changes today. Check out Vertcoin up there above everyone - of course helped a lot by its exchange rate nearly tripling in the last few days.
March 22, 2014, 09:46:55 AM
24hr payout at CoinSolver, 0.013300252BTC or 0.0083126575BTC/Day/Mh
March 22, 2014, 03:19:04 AM
suchmoon, criterion used for the analysis produced Mh? Probably better profit bound to the same types of cards - say 290. Vertkoyn because gives smaller values by 50%.
sorry for google english.
sorry for google english.
March 21, 2014, 09:07:48 PM
Just a heads up - if everything works as planned I'll start tracking coinshift and coinsolver on Sunday. I looked at some other pools mentioned in this thread:
- trademybit: it's using CryptoRush, which is a disaster waiting to happen, I can't risk my money until they get rid of that.
- ipominer: seems too new and too green. I can't find any usable stats on the site. I need at least some gauge of performance.
- trademybit: it's using CryptoRush, which is a disaster waiting to happen, I can't risk my money until they get rid of that.
- ipominer: seems too new and too green. I can't find any usable stats on the site. I need at least some gauge of performance.
March 21, 2014, 07:56:28 PM
Thanks for your work.
March 21, 2014, 02:06:13 PM
Bookmarked and following your progress.
March 21, 2014, 11:59:15 AM
No major changes for today. I'll be removing Middlecoin and/or Heavycoin within the next few days if performance doesn't improve.
March 20, 2014, 05:34:28 PM
Thanks for maintaining the numbers in this post, much appreciated.
March 20, 2014, 03:01:24 PM
ghash mines crap coins, and has no option to auto payout to ltc - unless I missed the settings to do so?
You missed the promotion GHash.IO had for LTC mining, which was the sole reason to include them in the chart. I wouldn't recommend using them now, but I'll keep them on for a few more days as a reference point for "pure" LTC profitability.
March 20, 2014, 02:23:25 PM
Thanks for your contribution, good stuff!
March 20, 2014, 01:51:00 PM
ghash mines crap coins, and has no option to auto payout to ltc - unless I missed the settings to do so?
March 20, 2014, 01:48:41 PM
Nice, data thanks.
March 20, 2014, 11:34:00 AM
Some updates for today:
- Removed the numbers and added a link to a Google spreadsheet instead (at the bottom of the OP).
- Gray area on the main chart shows one standard deviation below average, I might use that as a condition to remove underperforming pools.
- An improved Heavycoin cgminer version has been released for AMD GPUs, still lagging behind NVIDIA though. I'm using AMD for comparison, but if you have a 750 Ti you should be getting better results relative to Scrypt performance.
- Removed the numbers and added a link to a Google spreadsheet instead (at the bottom of the OP).
- Gray area on the main chart shows one standard deviation below average, I might use that as a condition to remove underperforming pools.
- An improved Heavycoin cgminer version has been released for AMD GPUs, still lagging behind NVIDIA though. I'm using AMD for comparison, but if you have a 750 Ti you should be getting better results relative to Scrypt performance.
March 19, 2014, 08:30:42 PM
After 24 hrs, I was at 0.095 at payouts last night on CoinSolver. Server was very unstable so I didn't get a great read. I am sitting at 0.015356822BTC Combined balance atm.
Over what kind of hashrate? Please give more context.
~1.6 Mh/s, it has been running stable for 20hrs now. I am at a 0.4% reject rate.
Quote from CoinSolver site on new upgrades
Quote
As of March 17th, we are now running on our new and improved hosting environment. Not only that, but our pool software has also received a significant facelift. Both of these should help us with our goal to improve your profitability, and the pool's efficiency.
So what's in the new update? Glad you asked... alot of things. Most notably, the ability to mine multiple coins simultaneously has been added. The 'round' based coin mining system is a thing of the past, as we can adapt more fluidly to the various coins' profitablilty fluctuations. This should give us a distinct boost with the coins employing KGW/1 block difficulty adjustments.
Additionally, we have put in a significant amount of work to improve your accept/reject rates, which in turn improves the pool's efficiency. Hopefully you will notice in your stats as well.
We also now support custom difficulty setting via your password. You can pick your dificulty using the d=X method, where X can be 64, 128, 256, etc. Please note: your custom difficulty must be the same for all miners sharing the same BTC address!
Also, if you do not select a difficulty of your own, the pool will now choose a difficulty for each coin, in order to get the best performance.
Beyond these features, there are many little niceties, such as invalid user checking, and dynamic coin adding (no pool downtime), etc.
So, with any major upgrade, there are bound to be bumps and bugs, so by all means, if you spot one, or are effected by one, please let us know asap!
Finally, I want to thank everyone who has helped us through this whole process. Your assistance, support, feedback and encouragement has been overwhelming. I truely appreciate all of it!
Cheers,
-VTMiner
So what's in the new update? Glad you asked... alot of things. Most notably, the ability to mine multiple coins simultaneously has been added. The 'round' based coin mining system is a thing of the past, as we can adapt more fluidly to the various coins' profitablilty fluctuations. This should give us a distinct boost with the coins employing KGW/1 block difficulty adjustments.
Additionally, we have put in a significant amount of work to improve your accept/reject rates, which in turn improves the pool's efficiency. Hopefully you will notice in your stats as well.
We also now support custom difficulty setting via your password. You can pick your dificulty using the d=X method, where X can be 64, 128, 256, etc. Please note: your custom difficulty must be the same for all miners sharing the same BTC address!
Also, if you do not select a difficulty of your own, the pool will now choose a difficulty for each coin, in order to get the best performance.
Beyond these features, there are many little niceties, such as invalid user checking, and dynamic coin adding (no pool downtime), etc.
So, with any major upgrade, there are bound to be bumps and bugs, so by all means, if you spot one, or are effected by one, please let us know asap!
Finally, I want to thank everyone who has helped us through this whole process. Your assistance, support, feedback and encouragement has been overwhelming. I truely appreciate all of it!
Cheers,
-VTMiner
Jump to: