Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 115. (Read 273816 times)
September 02, 2013, 11:09:24 AM
This is the sample run for Protos. Not quite at mass production yet. Happy monday!
September 02, 2013, 10:47:05 AM
Awww c'mon man, stop the teasing!!!! 
Hehe. Ok.
Boards are in! Check out these bad boys!
Happy Monday people !!
So is this just a sample run from the factory, or is it the start of the mass production. Here's hoping the chips arrive as promptly.
thanks for the update that just cheered up my dull monday at work.
regards
monkey
September 02, 2013, 10:43:30 AM
3D printing is a really cool idea. Gonna see if we might be able to know up a cool design that people could print for themselves if they want to. Genius. 
September 02, 2013, 10:36:55 AM
Any word on doing cases for them Barntech?
I think 4 Drillbit systems in a backplane would probably fit in a computer case with power supply?
But I see your point as well, something more custom.
I want it to look really cool, that way the missus will quit moaning at me
"What are all these wires?... wah wah wah!"
It will fit inside a computer case for sure. Main problem with a custom case is the cost. It will be quite a bit to actually get something made, and also add a fair whack to the postage too. If it was a larger run, it would become more viable but at this point not feeling worth it. That said, haven't ruled it out. If i get some extra time i'll get back on the trail and see if we can get a cool option for you guys. Would people be interested in a case even if it was a bit pricey?
We also talked about making some cool custom steampunkish wooden cases with fans at either end. That would also come out pretty expensive though, but may well impress you missus Lemonte
Let me know if you guys are super keen and i can look into it some more.
Regarding cost, I think you hit the nail on the head, at least for me. I am sort of tapped out. A computer case is for sure cheap if you search. And there is customs to consider. I imagine most of your customers are outside Australia? Maybe cost isn't a big deal to others though...
LOL with Lemonte's comment:
"I want it to look really cool, that way the missus will quit moaning at me
"What are all these wires?... wah wah wah!""
September 02, 2013, 10:17:16 AM
Any word on doing cases for them Barntech?
I think 4 Drillbit systems in a backplane would probably fit in a computer case with power supply?
But I see your point as well, something more custom.
I want it to look really cool, that way the missus will quit moaning at me
"What are all these wires?... wah wah wah!"
It will fit inside a computer case for sure. Main problem with a custom case is the cost. It will be quite a bit to actually get something made, and also add a fair whack to the postage too. If it was a larger run, it would become more viable but at this point not feeling worth it. That said, haven't ruled it out. If i get some extra time i'll get back on the trail and see if we can get a cool option for you guys. Would people be interested in a case even if it was a bit pricey?
We also talked about making some cool custom steampunkish wooden cases with fans at either end. That would also come out pretty expensive though, but may well impress you missus Lemonte
Let me know if you guys are super keen and i can look into it some more.
Or made locally.
Good idea?
Amazing idea! Especially on the 3D printing option.
September 02, 2013, 10:16:28 AM
Any word on doing cases for them Barntech?
I think 4 Drillbit systems in a backplane would probably fit in a computer case with power supply?
But I see your point as well, something more custom.
I want it to look really cool, that way the missus will quit moaning at me
"What are all these wires?... wah wah wah!"
It will fit inside a computer case for sure. Main problem with a custom case is the cost. It will be quite a bit to actually get something made, and also add a fair whack to the postage too. If it was a larger run, it would become more viable but at this point not feeling worth it. That said, haven't ruled it out. If i get some extra time i'll get back on the trail and see if we can get a cool option for you guys. Would people be interested in a case even if it was a bit pricey?
We also talked about making some cool custom steampunkish wooden cases with fans at either end. That would also come out pretty expensive though, but may well impress you missus Lemonte
Let me know if you guys are super keen and i can look into it some more.
Or made locally.
Good idea?
September 02, 2013, 10:13:08 AM
Any word on doing cases for them Barntech?
I think 4 Drillbit systems in a backplane would probably fit in a computer case with power supply?
But I see your point as well, something more custom.
I want it to look really cool, that way the missus will quit moaning at me
"What are all these wires?... wah wah wah!"
It will fit inside a computer case for sure. Main problem with a custom case is the cost. It will be quite a bit to actually get something made, and also add a fair whack to the postage too. If it was a larger run, it would become more viable but at this point not feeling worth it. That said, haven't ruled it out. If i get some extra time i'll get back on the trail and see if we can get a cool option for you guys. Would people be interested in a case even if it was a bit pricey?
We also talked about making some cool custom steampunkish wooden cases with fans at either end. That would also come out pretty expensive though, but may well impress you missus Lemonte
Let me know if you guys are super keen and i can look into it some more.
September 02, 2013, 10:03:23 AM
Any word on doing cases for them Barntech?
I think 4 Drillbit systems in a backplane would probably fit in a computer case with power supply?
But I see your point as well, something more custom.
I want it to look really cool, that way the missus will quit moaning at me
"What are all these wires?... wah wah wah!"
September 02, 2013, 10:01:19 AM
This is looking awesome
September 02, 2013, 10:00:31 AM
Any word on doing cases for them Barntech?
I think 4 Drillbit systems in a backplane would probably fit in a computer case with power supply?
But I see your point as well, something more custom.
September 02, 2013, 09:54:26 AM
Any word on doing cases for them Barntech?
September 02, 2013, 09:52:32 AM
Awww c'mon man, stop the teasing!!!!
Hehe. Ok.
Boards are in! Check out these bad boys!
This pic needs a bump and congrats on all the hard work being realized.
Even after todays boards no longer have the speed to keep up with the newest stuff years from now, that cool read board / miner will need to be behind a glass display case as you enter the house
September 02, 2013, 09:48:32 AM
I am currently waiting on BarnTech to pay me for the website overhaul.
Hoping he pays me soon so I can snap up one of those remaining drillbit thumbs. Gonna take the BTC and invest it in just dice for a week and hopefully their is a board left for my ordering. ^_^
You can send payment for the website here BarnTech: 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4
Greatly appreciated man. I'll confirm once I receive the payment!
Kyle.T
Hoping he pays me soon so I can snap up one of those remaining drillbit thumbs. Gonna take the BTC and invest it in just dice for a week and hopefully their is a board left for my ordering. ^_^
You can send payment for the website here BarnTech: 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4
Greatly appreciated man. I'll confirm once I receive the payment!
Kyle.T
HOLY CRAP! Thank you for the payment for the site design Barntech!
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
I don't see any transactions in your wallet.. maybe im blind? 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4 Or you ment 1KLYExysvx4yMN5jG3thep37C2c6DLAj4Z
I don't see any transactions either. MRKLYE - Care to elaborate?
Payment went to this address 1KLYExysvx4yMN5jG3thep37C2c6DLAj4Z
Nothing huge really. Just a token of appreciation for a job well done. Website looks cool.
Thanks again Kyle. September 02, 2013, 09:37:56 AM
I am currently waiting on BarnTech to pay me for the website overhaul.
Hoping he pays me soon so I can snap up one of those remaining drillbit thumbs. Gonna take the BTC and invest it in just dice for a week and hopefully their is a board left for my ordering. ^_^
You can send payment for the website here BarnTech: 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4
Greatly appreciated man. I'll confirm once I receive the payment!
Kyle.T
Hoping he pays me soon so I can snap up one of those remaining drillbit thumbs. Gonna take the BTC and invest it in just dice for a week and hopefully their is a board left for my ordering. ^_^
You can send payment for the website here BarnTech: 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4
Greatly appreciated man. I'll confirm once I receive the payment!
Kyle.T
HOLY CRAP! Thank you for the payment for the site design Barntech!
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
I don't see any transactions in your wallet.. maybe im blind? 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4 Or you ment 1KLYExysvx4yMN5jG3thep37C2c6DLAj4Z
I don't see any transactions either. MRKLYE - Care to elaborate?
September 02, 2013, 09:15:58 AM
HOLY CRAP! Thank you for the payment for the site design Barntech!
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
Thank you very much for helping out!
It's really nice to have various members of the community stepping up and offering assistance. I have had lots of people offer their skills and efforts and truly appreciate it. Good vibes.
Thanks for the update Barntech.
If next time need some help, I do wanna join in
September 02, 2013, 09:08:06 AM
HOLY CRAP! Thank you for the payment for the site design Barntech!
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
Thank you very much for helping out!
It's really nice to have various members of the community stepping up and offering assistance. I have had lots of people offer their skills and efforts and truly appreciate it. Good vibes.
September 02, 2013, 09:01:47 AM
I am currently waiting on BarnTech to pay me for the website overhaul.
Hoping he pays me soon so I can snap up one of those remaining drillbit thumbs. Gonna take the BTC and invest it in just dice for a week and hopefully their is a board left for my ordering. ^_^
You can send payment for the website here BarnTech: 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4
Greatly appreciated man. I'll confirm once I receive the payment!
Kyle.T
Hoping he pays me soon so I can snap up one of those remaining drillbit thumbs. Gonna take the BTC and invest it in just dice for a week and hopefully their is a board left for my ordering. ^_^
You can send payment for the website here BarnTech: 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4
Greatly appreciated man. I'll confirm once I receive the payment!
Kyle.T
HOLY CRAP! Thank you for the payment for the site design Barntech!
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
I don't see any transactions in your wallet.. maybe im blind? 12x1G3g7vHgSZLGYwGxwoCA6b7vA138ZJ4 Or you ment 1KLYExysvx4yMN5jG3thep37C2c6DLAj4Z
September 02, 2013, 08:51:24 AM
Nice, it that a lot of gold plating I can see?
Copper
September 02, 2013, 08:49:01 AM
HOLY CRAP! Thank you for the payment for the site design Barntech!
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
That is the largest single transaction I have ever gotten before! Thank you so much!
You need ANYTHING done to the site. Lemme know. I am forever indebted to you!
Thanks again for letting me be part of this project!
Kyle.T
September 02, 2013, 08:39:21 AM
They look awesome!!!!
Great work Barn
Great work Barn
Jump to: